Re: mynetworks - should server IP be included ?

On Sun, September 17, 2023 4:45 pm, Patrick Ben Koetter wrote:

Benny, Patrick, thanks

> Even simplier than that:
> $ postconf -d mynetworks
> mynetworks = 127.0.0.0/8 192.168.179.0/24 192.168.122.0/24 [::1]/128
> [fd00:0:0:1::]/64 [fe80::]/64

that includes 2nd ethernet, eth1, do I need to keep 10.0.12.0/22 ?

# postconf -d mynetworks
mynetworks = 127.0.0.0/8 103.106.168.104/29 10.0.12.0/22 [::1]/128
[fe80::]/64

eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.12.3  netmask 255.255.252.0  broadcast 10.0.15.255
        inet6 fe80::5054:ff:fe62:28c2  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:62:28:c2  txqueuelen 1000  (Ethernet)
        RX packets 78  bytes 5460 (5.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 10  bytes 712 (712.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

thanks, Voytek