Re: CentOS

Just out of curiosity, what is the protection level for the users in
question?

Jake

On Fri, Apr 10, 2020 at 8:17 AM jjs - mainphrame <[email protected]> wrote:

> Thanks for the exim details Manny -
>
> As for your spam detection, are the users in question in the maia
> database?
>
> Here, I had to add the domains in order for users from those domains to be
> autocreated.
>
> Jake
>
> On Fri, Apr 10, 2020 at 6:24 AM Manny Marinho <[email protected]>
> wrote:
>
>> Jake here is my exim configuration, I tried to use what David is using
>> on my server but it didn't work for me, exim gave some start up
>> errors. That could be related to my server though as my current exim
>> config file is not based on the latest exim build, it's now a few
>> updates behind. I haven't had the time to merge my config with the
>> latest version but will do that soon. I have everything up and running
>> now and have setup a few domains however regardless of what protection
>> levels I'm setting (either high or even setting them manually) no
>> messages are being cached within the maia interface at all for any
>> domain, I also don't see anything being written to the DB. I also use
>> the setting on all my domains to cache all non-spam which isn't
>> happening either. There are messages hitting maia because I see the
>> activity on the maia log but they all say Passed Clean. This is
>> essentially the same issue I was seeing a few months ago when I
>> decided to install and try the technion maia build. Any ideas what may
>> be causing this or how I can figure this out? Thank you all very much
>> for all your help.
>>
>> My Router:
>>
>> amavis:
>> driver = manualroute
>> condition = "${if eq {$interface_port}{10025} {0}{1}}"
>> condition = "${if eq {$spam_score_int}{}{1}{${if <=
>> {${spam_score_int}}{00}{0}{1}}}}"
>> domains = +local_domains
>> transport = amavis
>> route_list = "* localhost byname"
>> self = send
>> verify_recipient = false
>>
>>
>> My Transport:
>>
>> amavis:
>> driver = smtp
>> port = 10024
>> allow_localhost
>>
>>
>> On Thu, Apr 9, 2020 at 11:52 PM jjs - mainphrame <[email protected]>
>> wrote:
>> >
>> > Thank you, that is useful information. I'll see if I can build a
>> working config with exim.
>> >
>> > Jake
>> >
>> > On Thu, Apr 9, 2020 at 3:22 PM David Byte <[email protected]> wrote:
>> >>
>> >> I’ve got an exim config for you.
>> >>
>> >> I’ve just brought the parts salient to using Maia here.
>> >>
>> >> Start by verifying with routers that do nothing but verify alias,
>> mailing lists, etc.
>> >> Next pass the mail to a router that can send it to the Maia server
>> >>
>> >> check_system_aliases:
>> >>   driver = redirect
>> >>   allow_fail
>> >>   allow_defer
>> >>   data = ${lookup{$local_part}lsearch{/etc/aliases}}
>> >>   verify_only
>> >>   pass_router = amavis
>> >>
>> >>
>> >> And here is the amavis router
>> >> amavis:
>> >>   # Do NOT run if received via 10025/tcp or if already spam-scanned
>> >>   # or if bounce message ($sender_address="")
>> >>   condition = "${if or {{eq {$interface_port}{10025}} \
>> >>         {eq {$received_protocol}{spam-scanned}}\
>> >>         {eq {$received_protocol}{local}}\
>> >>         {eq {$sender_address}{}} \
>> >>         }{0}{1} }"
>> >>   transport = amavis
>> >>   route_list = "* mailguard.myhost.net byname"
>> >>   self = send
>> >>
>> >>
>> >> And this in my transport definition
>> >> amavis:
>> >>   driver = smtp
>> >>   port = 10024
>> >>
>> >>
>> >> I hope this helps
>> >>
>> >> On Apr 9, 2020, at 4:54 PM, jjs - mainphrame <[email protected]>
>> wrote:
>> >>
>> >> Manny,
>> >>
>> >> I'd love to see your exim configuration, for future reference. I've
>> always used postfix, but it would be nice to know of a working exim
>> configuration, since more choice is good for all of us.
>> >>
>> >> Jake
>> >>
>> >> On Thu, Apr 9, 2020 at 8:35 AM Manny Marinho <[email protected]>
>> wrote:
>> >>>
>> >>> Hi Jake thanks for the reply. I was able to fix that problem, it
>> >>> appears it was a permissions issue. I ran "maiad debug" and saw this
>> >>> error:
>> >>>
>> >>> Apr  8 19:52:59 mydomain.com ./maiad[18270]: TROUBLE in
>> pre_loop_hook:
>> >>> TEMPBASE directory is not writable: /var/lib/maia/tmp at ./maiad line
>> >>> 8491.
>> >>>
>> >>> Suicide () TROUBLE in pre_loop_hook: TEMPBASE directory is not
>> >>> writable: /var/lib/maia/tmp at ./maiad line 8491.
>> >>>
>> >>> The daemon now starts and runs normally under CentOS 6 and PHP 7.2. I
>> >>> am having another issue however. My configtest.pl tests fine and so
>> >>> does the web configtest.php. I'm using your supplied Smarty version. I
>> >>> created a new maia DB using your manual steps below which produced one
>> >>> error however I don't believe this is significant or the root cause of
>> >>> my problem,
>> >>>
>> >>> [root@host # mysqladmin create maia
>> >>>
>> >>> [root@host # mysql maia < maia-mysql.sql
>> >>>
>> >>> ERROR 1366 (22007) at line 716: Incorrect string value: '\xC2\x9Atina'
>> >>> for column `maia`.`maia_languages`.`language_name` at row 1
>> >>>
>> >>> I also ran the below afterwards since I use amavis as my maia user,
>> >>>
>> >>> [root]# mysql -u root -p password
>> >>>
>> >>> mysql> GRANT CREATE, DROP, ALTER, SELECT, INSERT, UPDATE, DELETE ON
>> >>> maia.* TO amavis@localhost IDENTIFIED BY 'mypassword';
>> >>>
>> >>> My problem now is I can't run internal-init.php or
>> >>> login.php?super=register as both produce the error:
>> >>>
>> >>> Error with themes: theme not found or permissions problem.
>> >>>
>> >>> The maia error log shows some generic errors which I don't believe are
>> >>> causing any issue.
>> >>>
>> >>> [09-Apr-2020 08:28:19 America/Los_Angeles] PHP Deprecated:  Methods
>> >>> with the same name as their class will not be constructors in a future
>> >>> version of PHP; ThemeSmarty has a deprecated constructor in
>> >>> /home/folder/public_html/maia/smarty.php on line 85
>> >>> [09-Apr-2020 08:28:19 America/Los_Angeles] PHP Deprecated:  Methods
>> >>> with the same name as their class will not be constructors in a future
>> >>> version of PHP; Smarty has a deprecated constructor in
>> >>> /usr/local/lib/php/Smarty2/Smarty.class.php on line 64
>> >>>
>> >>> All my web facing files sit in /home/folder/public_html/maia/ instead
>> >>> of  /var/www/html/maia/ this is very similar to an old maia setup I
>> >>> used to have running in the past.
>> >>>
>> >>>
>> >>> -Manny
>> >>>
>> >>> On Wed, Apr 8, 2020 at 11:11 PM <[email protected]>
>> wrote:
>> >>> >
>> >>> > Send Maia-users mailing list submissions to
>> >>> >         [email protected]
>> >>> >
>> >>> > To subscribe or unsubscribe via the World Wide Web, visit
>> >>> >
>> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > or, via email, send a message with subject or body 'help' to
>> >>> >         [email protected]
>> >>> >
>> >>> > You can reach the person managing the list at
>> >>> >         [email protected]
>> >>> >
>> >>> > When replying, please edit your Subject line so it is more specific
>> >>> > than "Re: Contents of Maia-users digest..."
>> >>> >
>> >>> >
>> >>> > Today's Topics:
>> >>> >
>> >>> >    1. CentOS 6 (Manny Marinho)
>> >>> >    2. Re: CentOS 6 (jjs - mainphrame)
>> >>> >    3. Re: CentOS 6 (Ed)
>> >>> >    4. Re: CentOS 6 (Lawrence Mulder)
>> >>> >
>> >>> >
>> >>> >
>> ----------------------------------------------------------------------
>> >>> >
>> >>> > Message: 1
>> >>> > Date: Wed, 8 Apr 2020 18:21:38 -0400
>> >>> > From: Manny Marinho <[email protected]>
>> >>> > To: [email protected]
>> >>> > Subject: [Maia-users] CentOS 6
>> >>> > Message-ID: <E3A2C447-0C18-41B5-B670-EEDE3182B00C-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> >>> > Content-Type: text/plain; charset=utf-8
>> >>> >
>> >>> > I know it’s end of life but has anybody gotten this to work with
>> CentOS 6? I’ve tried to use the installer for CentOS 7 which appears to
>> work for the most part although my MTA is exim and I’m familiar with the
>> exim config part from using the original maia version. Seems the issue that
>> I’m seeing is the maia daemon won’t start or nothing happens when you try
>> to run it manually.
>> >>> >
>> >>> > -Manny
>> >>> >
>> >>> > > On Apr 8, 2020, at 3:00 PM, [email protected]
>> wrote:
>> >>> > >
>> >>> > > Send Maia-users mailing list submissions to
>> >>> > >    [email protected]
>> >>> > >
>> >>> > > To subscribe or unsubscribe via the World Wide Web, visit
>> >>> > >    http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > > or, via email, send a message with subject or body 'help' to
>> >>> > >    [email protected]
>> >>> > >
>> >>> > > You can reach the person managing the list at
>> >>> > >    [email protected]
>> >>> > >
>> >>> > > When replying, please edit your Subject line so it is more
>> specific
>> >>> > > than "Re: Contents of Maia-users digest..."
>> >>> > >
>> >>> > >
>> >>> > > Today's Topics:
>> >>> > >
>> >>> > >   1. maia on suse leap 15.1 (jjs - mainphrame)
>> >>> > >
>> >>> > >
>> >>> > >
>> ----------------------------------------------------------------------
>> >>> > >
>> >>> > > Message: 1
>> >>> > > Date: Tue, 7 Apr 2020 21:35:12 -0700
>> >>> > > From: jjs - mainphrame <[email protected]>
>> >>> > > To: [email protected]
>> >>> > > Subject: [Maia-users] maia on suse leap 15.1
>> >>> > > Message-ID:
>> >>> > >    <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN=
>> [email protected]>
>> >>> > > Content-Type: text/plain; charset="utf-8"
>> >>> > >
>> >>> > > Hi folks,
>> >>> > >
>> >>> > > My goal today was to achieve a working maia install on suse leap
>> 15.1
>> >>> > >
>> >>> > > It comes as no surprise that the perl parts all work perfectly and
>> >>> > > configtest.pl is fine.
>> >>> > >
>> >>> > > But I'm seeing weird errors with php and pear. The pear modules
>> are
>> >>> > > installed, pear list shows them, but configtest.php can't find
>> them.
>> >>> > >
>> >>> > > I'll keep chipping away at it, but thought I'd check to see if
>> anyone on
>> >>> > > the list has had any luck with maia on suse leap and php 7.x, or
>> any words
>> >>> > > of wisdom on that score  -
>> >>> > >
>> >>> > > Cheers,
>> >>> > >
>> >>> > > Jake
>> >>> > > -------------- next part --------------
>> >>> > > An HTML attachment was scrubbed...
>> >>> > > URL: <
>> http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html
>> >
>> >>> > >
>> >>> > > ------------------------------
>> >>> > >
>> >>> > > Subject: Digest Footer
>> >>> > >
>> >>> > > _______________________________________________
>> >>> > > Maia-users mailing list
>> >>> > > [email protected]
>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > >
>> >>> > >
>> >>> > > ------------------------------
>> >>> > >
>> >>> > > End of Maia-users Digest, Vol 171, Issue 2
>> >>> > > ******************************************
>> >>> >
>> >>> >
>> >>> > ------------------------------
>> >>> >
>> >>> > Message: 2
>> >>> > Date: Wed, 8 Apr 2020 16:29:52 -0700
>> >>> > From: jjs - mainphrame <[email protected]>
>> >>> > To: Manny Marinho <[email protected]>
>> >>> > Cc: [email protected]
>> >>> > Subject: Re: [Maia-users] CentOS 6
>> >>> > Message-ID:
>> >>> >         <CABkzw7xVWngB0zT7JAR5LQ2rd+bYxfGHSYNU5C1rWazHoXX=
>> [email protected]>
>> >>> > Content-Type: text/plain; charset="utf-8"
>> >>> >
>> >>> > Does configtest.pl work? When you start maiad by hand, are there
>> any
>> >>> > errors? I think I've run maia on centos 6 in the past.
>> >>> >
>> >>> > Jake
>> >>> >
>> >>> > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho <
>> [email protected]>
>> >>> > wrote:
>> >>> >
>> >>> > > I know it’s end of life but has anybody gotten this to work with
>> CentOS 6?
>> >>> > > I’ve tried to use the installer for CentOS 7 which appears to
>> work for the
>> >>> > > most part although my MTA is exim and I’m familiar with the exim
>> config
>> >>> > > part from using the original maia version. Seems the issue that
>> I’m seeing
>> >>> > > is the maia daemon won’t start or nothing happens when you try to
>> run it
>> >>> > > manually.
>> >>> > >
>> >>> > > -Manny
>> >>> > >
>> >>> > > > On Apr 8, 2020, at 3:00 PM, [email protected]
>> wrote:
>> >>> > > >
>> >>> > > > Send Maia-users mailing list submissions to
>> >>> > > >    [email protected]
>> >>> > > >
>> >>> > > > To subscribe or unsubscribe via the World Wide Web, visit
>> >>> > > >
>> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > > > or, via email, send a message with subject or body 'help' to
>> >>> > > >    [email protected]
>> >>> > > >
>> >>> > > > You can reach the person managing the list at
>> >>> > > >    [email protected]
>> >>> > > >
>> >>> > > > When replying, please edit your Subject line so it is more
>> specific
>> >>> > > > than "Re: Contents of Maia-users digest..."
>> >>> > > >
>> >>> > > >
>> >>> > > > Today's Topics:
>> >>> > > >
>> >>> > > >   1. maia on suse leap 15.1 (jjs - mainphrame)
>> >>> > > >
>> >>> > > >
>> >>> > > >
>> ----------------------------------------------------------------------
>> >>> > > >
>> >>> > > > Message: 1
>> >>> > > > Date: Tue, 7 Apr 2020 21:35:12 -0700
>> >>> > > > From: jjs - mainphrame <[email protected]>
>> >>> > > > To: [email protected]
>> >>> > > > Subject: [Maia-users] maia on suse leap 15.1
>> >>> > > > Message-ID:
>> >>> > > >    <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN=
>> [email protected]>
>> >>> > > > Content-Type: text/plain; charset="utf-8"
>> >>> > > >
>> >>> > > > Hi folks,
>> >>> > > >
>> >>> > > > My goal today was to achieve a working maia install on suse
>> leap 15.1
>> >>> > > >
>> >>> > > > It comes as no surprise that the perl parts all work perfectly
>> and
>> >>> > > > configtest.pl is fine.
>> >>> > > >
>> >>> > > > But I'm seeing weird errors with php and pear. The pear modules
>> are
>> >>> > > > installed, pear list shows them, but configtest.php can't find
>> them.
>> >>> > > >
>> >>> > > > I'll keep chipping away at it, but thought I'd check to see if
>> anyone on
>> >>> > > > the list has had any luck with maia on suse leap and php 7.x,
>> or any
>> >>> > > words
>> >>> > > > of wisdom on that score  -
>> >>> > > >
>> >>> > > > Cheers,
>> >>> > > >
>> >>> > > > Jake
>> >>> > > > -------------- next part --------------
>> >>> > > > An HTML attachment was scrubbed...
>> >>> > > > URL: <
>> >>> > >
>> http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html
>> >>> > > >
>> >>> > > >
>> >>> > > > ------------------------------
>> >>> > > >
>> >>> > > > Subject: Digest Footer
>> >>> > > >
>> >>> > > > _______________________________________________
>> >>> > > > Maia-users mailing list
>> >>> > > > [email protected]
>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > > >
>> >>> > > >
>> >>> > > > ------------------------------
>> >>> > > >
>> >>> > > > End of Maia-users Digest, Vol 171, Issue 2
>> >>> > > > ******************************************
>> >>> > > _______________________________________________
>> >>> > > Maia-users mailing list
>> >>> > > [email protected]
>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > >
>> >>> > -------------- next part --------------
>> >>> > An HTML attachment was scrubbed...
>> >>> > URL: <
>> http://www.renaissoft.com/pipermail/maia-users/attachments/20200408/615d172d/attachment-0001.html
>> >
>> >>> >
>> >>> > ------------------------------
>> >>> >
>> >>> > Message: 3
>> >>> > Date: Wed, 8 Apr 2020 23:07:42 -0400
>> >>> > From: Ed <ed-9FOcALY/[email protected]>
>> >>> > To: [email protected]
>> >>> > Subject: Re: [Maia-users] CentOS 6
>> >>> > Message-ID: <e296fe44-de83-5e2c-3e78-6ca3dc6d6d62-9FOcALY/[email protected]>
>> >>> > Content-Type: text/plain; charset=utf-8; format=flowed
>> >>> >
>> >>> > I've been running maia on centos6 for years and it works just fine.
>> >>> >
>> >>> > --Ed
>> >>> >
>> >>> > On 4/8/20 7:29 PM, jjs - mainphrame wrote:
>> >>> > > Does configtest.pl <http://configtest.pl> work? When you start
>> maiad by
>> >>> > > hand, are there any errors? I think I've run maia on centos 6 in
>> the past.
>> >>> > >
>> >>> > > Jake
>> >>> > >
>> >>> > > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho <
>> [email protected]
>> >>> > > <mailto:[email protected]>> wrote:
>> >>> > >
>> >>> > >     I know it’s end of life but has anybody gotten this to work
>> with
>> >>> > >     CentOS 6? I’ve tried to use the installer for CentOS 7 which
>> appears
>> >>> > >     to work for the most part although my MTA is exim and I’m
>> familiar
>> >>> > >     with the exim config part from using the original maia
>> version.
>> >>> > >     Seems the issue that I’m seeing is the maia daemon won’t
>> start or
>> >>> > >     nothing happens when you try to run it manually.
>> >>> > >
>> >>> > >     -Manny
>> >>> > >
>> >>> > >      > On Apr 8, 2020, at 3:00 PM,
>> [email protected]
>> >>> > >     <mailto:[email protected]> wrote:
>> >>> > >      >
>> >>> > >      > Send Maia-users mailing list submissions to
>> >>> > >      > [email protected] <mailto:
>> [email protected]>
>> >>> > >      >
>> >>> > >      > To subscribe or unsubscribe via the World Wide Web, visit
>> >>> > >      >
>> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > >      > or, via email, send a message with subject or body 'help'
>> to
>> >>> > >      > [email protected]
>> >>> > >     <mailto:[email protected]>
>> >>> > >      >
>> >>> > >      > You can reach the person managing the list at
>> >>> > >      > [email protected]
>> >>> > >     <mailto:[email protected]>
>> >>> > >      >
>> >>> > >      > When replying, please edit your Subject line so it is more
>> specific
>> >>> > >      > than "Re: Contents of Maia-users digest..."
>> >>> > >      >
>> >>> > >      >
>> >>> > >      > Today's Topics:
>> >>> > >      >
>> >>> > >      >   1. maia on suse leap 15.1 (jjs - mainphrame)
>> >>> > >      >
>> >>> > >      >
>> >>> > >      >
>> >>> > >
>>  ----------------------------------------------------------------------
>> >>> > >      >
>> >>> > >      > Message: 1
>> >>> > >      > Date: Tue, 7 Apr 2020 21:35:12 -0700
>> >>> > >      > From: jjs - mainphrame <[email protected]
>> >>> > >     <mailto:[email protected]>>
>> >>> > >      > To: [email protected] <mailto:
>> [email protected]>
>> >>> > >      > Subject: [Maia-users] maia on suse leap 15.1
>> >>> > >      > Message-ID:
>> >>> > >      >
>> >>> > >     <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN=
>> [email protected]
>> >>> > >     <mailto:[email protected]>>
>> >>> > >      > Content-Type: text/plain; charset="utf-8"
>> >>> > >      >
>> >>> > >      > Hi folks,
>> >>> > >      >
>> >>> > >      > My goal today was to achieve a working maia install on
>> suse leap 15.1
>> >>> > >      >
>> >>> > >      > It comes as no surprise that the perl parts all work
>> perfectly and
>> >>> > >      > configtest.pl <http://configtest.pl> is fine.
>> >>> > >      >
>> >>> > >      > But I'm seeing weird errors with php and pear. The pear
>> modules are
>> >>> > >      > installed, pear list shows them, but configtest.php can't
>> find them.
>> >>> > >      >
>> >>> > >      > I'll keep chipping away at it, but thought I'd check to
>> see if
>> >>> > >     anyone on
>> >>> > >      > the list has had any luck with maia on suse leap and php
>> 7.x, or
>> >>> > >     any words
>> >>> > >      > of wisdom on that score  -
>> >>> > >      >
>> >>> > >      > Cheers,
>> >>> > >      >
>> >>> > >      > Jake
>> >>> > >      > -------------- next part --------------
>> >>> > >      > An HTML attachment was scrubbed...
>> >>> > >      > URL:
>> >>> > >     <
>> http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html
>> >
>> >>> > >      >
>> >>> > >      > ------------------------------
>> >>> > >      >
>> >>> > >      > Subject: Digest Footer
>> >>> > >      >
>> >>> > >      > _______________________________________________
>> >>> > >      > Maia-users mailing list
>> >>> > >      > [email protected] <mailto:
>> [email protected]>
>> >>> > >      >
>> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > >      >
>> >>> > >      >
>> >>> > >      > ------------------------------
>> >>> > >      >
>> >>> > >      > End of Maia-users Digest, Vol 171, Issue 2
>> >>> > >      > ******************************************
>> >>> > >     _______________________________________________
>> >>> > >     Maia-users mailing list
>> >>> > >     [email protected] <mailto:[email protected]>
>> >>> > >     http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > >
>> >>> > >
>> >>> > > _______________________________________________
>> >>> > > Maia-users mailing list
>> >>> > > [email protected]
>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > >
>> >>> >
>> >>> >
>> >>> >
>> >>> > ------------------------------
>> >>> >
>> >>> > Message: 4
>> >>> > Date: Thu, 9 Apr 2020 03:11:41 +0000
>> >>> > From: Lawrence Mulder <lmulder-iL7gtBVyNKCGUxFv0Br65wC/[email protected]>
>> >>> > To: Ed <ed-9FOcALY/[email protected]>, Maia-users_renaissoft.com
>> >>> >         <[email protected]>
>> >>> > Subject: Re: [Maia-users] CentOS 6
>> >>> > Message-ID: <
>> tbenk20b1iclu95a3oln4e0p.1586401899912-iL7gtBVyNKCGUxFv0Br65wC/[email protected]>
>> >>> > Content-Type: text/plain; charset="utf-8"
>> >>> >
>> >>> > Ed,
>> >>> >
>> >>> > I was going to say the same thing, but I use version 1.0.2c, I
>> think? I assume he is trying to use the latest 1.0.4 stuff being talked
>> about on this list recently, but I'm not sure, LOL.  I have never tried the
>> centos 7 / Debian latest maia on centos 6.
>> >>> >
>> >>> > Thanks,
>> >>> > -Larry
>> >>> >
>> >>> >
>> >>> >
>> >>> > From: ed-9FOcALY/[email protected]
>> >>> > Sent: April 8, 2020 10:07 PM
>> >>> > To: [email protected]
>> >>> > Subject: Re: [Maia-users] CentOS 6
>> >>> >
>> >>> > I've been running maia on centos6 for years and it works just fine.
>> >>> >
>> >>> > --Ed
>> >>> >
>> >>> > On 4/8/20 7:29 PM, jjs - mainphrame wrote:
>> >>> > > Does configtest.pl <http://configtest.pl> work? When you start
>> maiad by
>> >>> > > hand, are there any errors? I think I've run maia on centos 6 in
>> the past.
>> >>> > >
>> >>> > > Jake
>> >>> > >
>> >>> > > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho <
>> [email protected]
>> >>> > > <mailto:[email protected]>> wrote:
>> >>> > >
>> >>> > >     I know it’s end of life but has anybody gotten this to work
>> with
>> >>> > >     CentOS 6? I’ve tried to use the installer for CentOS 7 which
>> appears
>> >>> > >     to work for the most part although my MTA is exim and I’m
>> familiar
>> >>> > >     with the exim config part from using the original maia
>> version.
>> >>> > >     Seems the issue that I’m seeing is the maia daemon won’t
>> start or
>> >>> > >     nothing happens when you try to run it manually.
>> >>> > >
>> >>> > >     -Manny
>> >>> > >
>> >>> > >      > On Apr 8, 2020, at 3:00 PM,
>> [email protected]
>> >>> > >     <mailto:[email protected]> wrote:
>> >>> > >      >
>> >>> > >      > Send Maia-users mailing list submissions to
>> >>> > >      > [email protected] <mailto:
>> [email protected]>
>> >>> > >      >
>> >>> > >      > To subscribe or unsubscribe via the World Wide Web, visit
>> >>> > >      >
>> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > >      > or, via email, send a message with subject or body 'help'
>> to
>> >>> > >      > [email protected]
>> >>> > >     <mailto:[email protected]>
>> >>> > >      >
>> >>> > >      > You can reach the person managing the list at
>> >>> > >      > [email protected]
>> >>> > >     <mailto:[email protected]>
>> >>> > >      >
>> >>> > >      > When replying, please edit your Subject line so it is more
>> specific
>> >>> > >      > than "Re: Contents of Maia-users digest..."
>> >>> > >      >
>> >>> > >      >
>> >>> > >      > Today's Topics:
>> >>> > >      >
>> >>> > >      >   1. maia on suse leap 15.1 (jjs - mainphrame)
>> >>> > >      >
>> >>> > >      >
>> >>> > >      >
>> >>> > >
>>  ----------------------------------------------------------------------
>> >>> > >      >
>> >>> > >      > Message: 1
>> >>> > >      > Date: Tue, 7 Apr 2020 21:35:12 -0700
>> >>> > >      > From: jjs - mainphrame <[email protected]
>> >>> > >     <mailto:[email protected]>>
>> >>> > >      > To: [email protected] <mailto:
>> [email protected]>
>> >>> > >      > Subject: [Maia-users] maia on suse leap 15.1
>> >>> > >      > Message-ID:
>> >>> > >      >
>> >>> > >     <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN=
>> [email protected]
>> >>> > >     <mailto:[email protected]>>
>> >>> > >      > Content-Type: text/plain; charset="utf-8"
>> >>> > >      >
>> >>> > >      > Hi folks,
>> >>> > >      >
>> >>> > >      > My goal today was to achieve a working maia install on
>> suse leap 15.1
>> >>> > >      >
>> >>> > >      > It comes as no surprise that the perl parts all work
>> perfectly and
>> >>> > >      > configtest.pl <http://configtest.pl> is fine.
>> >>> > >      >
>> >>> > >      > But I'm seeing weird errors with php and pear. The pear
>> modules are
>> >>> > >      > installed, pear list shows them, but configtest.php can't
>> find them.
>> >>> > >      >
>> >>> > >      > I'll keep chipping away at it, but thought I'd check to
>> see if
>> >>> > >     anyone on
>> >>> > >      > the list has had any luck with maia on suse leap and php
>> 7.x, or
>> >>> > >     any words
>> >>> > >      > of wisdom on that score  -
>> >>> > >      >
>> >>> > >      > Cheers,
>> >>> > >      >
>> >>> > >      > Jake
>> >>> > >      > -------------- next part --------------
>> >>> > >      > An HTML attachment was scrubbed...
>> >>> > >      > URL:
>> >>> > >     <
>> http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html
>> >
>> >>> > >      >
>> >>> > >      > ------------------------------
>> >>> > >      >
>> >>> > >      > Subject: Digest Footer
>> >>> > >      >
>> >>> > >      > _______________________________________________
>> >>> > >      > Maia-users mailing list
>> >>> > >      > [email protected] <mailto:
>> [email protected]>
>> >>> > >      >
>> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > >      >
>> >>> > >      >
>> >>> > >      > ------------------------------
>> >>> > >      >
>> >>> > >      > End of Maia-users Digest, Vol 171, Issue 2
>> >>> > >      > ******************************************
>> >>> > >     _______________________________________________
>> >>> > >     Maia-users mailing list
>> >>> > >     [email protected] <mailto:[email protected]>
>> >>> > >     http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > >
>> >>> > >
>> >>> > > _______________________________________________
>> >>> > > Maia-users mailing list
>> >>> > > [email protected]
>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > >
>> >>> >
>> >>> > _______________________________________________
>> >>> > Maia-users mailing list
>> >>> > [email protected]
>> >>> > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> > -------------- next part --------------
>> >>> > An HTML attachment was scrubbed...
>> >>> > URL: <
>> http://www.renaissoft.com/pipermail/maia-users/attachments/20200409/16d3e7df/attachment.html
>> >
>> >>> >
>> >>> > ------------------------------
>> >>> >
>> >>> > Subject: Digest Footer
>> >>> >
>> >>> > _______________________________________________
>> >>> > Maia-users mailing list
>> >>> > [email protected]
>> >>> > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>> >
>> >>> >
>> >>> > ------------------------------
>> >>> >
>> >>> > End of Maia-users Digest, Vol 171, Issue 3
>> >>> > ******************************************
>> >>> _______________________________________________
>> >>> Maia-users mailing list
>> >>> [email protected]
>> >>> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>
>> >> _______________________________________________
>> >> Maia-users mailing list
>> >> [email protected]
>> >> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users
>> >>
>> >>
>>
>

_______________________________________________
Maia-users mailing list
[email protected]
http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users