Re: CentOS
jjs - mainphrame <[email protected]>
| Newsgroups | gmane.mail.virus.maiamailguard |
|---|---|
| Message-ID | <CABkzw7y+1nj=Q2c-NpCR5qCq1raGfVXdv4_bP7d+nA-4qnwxKQ@mail.gmail.com> |
Did you say you're on centos 6? If so, I'll do a clean install here, to test. Jake On Thu, Apr 16, 2020 at 12:19 PM Manny Marinho <[email protected]> wrote: > So I created a text file attachment with the EICAR signature and sent > it from an account in my domain to another account in my domain. I > increased the debug level before and I see the message in question > passing through the maia log but it just passes as clean. Also seems > like I'm not really seeing any virus scan activity going on in the > maia log at all which is odd because I have it enabled in the maia > system configuration and from what I can tell it all looks fine in the > maia config files. I also see the clamd process running on my server > which currently runs as the amavis user just like my maia daemon does. > > > -Manny > > On Thu, Apr 16, 2020 at 11:42 AM jjs - mainphrame <[email protected]> > wrote: > > > > That sure doesn't sound right, Manny. > > > > Even without the Bayes adjustment, the rest of the SA rules should be > contributing some points to the scores. > > > > If it were me, I'd send some known spam through just to verify. If it's > not accumulating any points for spam characteristics, there must be some > basic configuration detail that's missing. Maybe turn up the maia debug to > 5, and see if anything stands out... > > > > I see all sorts of spam here, but zero viruses, I finally managed to > send myself an EICAR.COM file and finally quarantined something with > clamd. > > > > Jake > > > > > > On Thu, Apr 16, 2020 at 8:30 AM Manny Marinho <[email protected]> > wrote: > >> > >> Go it that is what I was looking for thank you! Although I have maia > >> set to cache all messages I'm still not seeing any messages at all > >> either spam or ham for any users or domains. Is that expected since my > >> bayes still has less than 200 spam and ham samples? Right now when I > >> look at the maia log I just see any message that hits maia as a > >> "Passed CLEAN" in the log. > >> > >> On Thu, Apr 16, 2020 at 11:02 AM jjs - mainphrame <[email protected]> > wrote: > >> > > >> > Hi Manny, > >> > > >> > I can get to the same menu here. > >> > > >> > Admin -> users -> find users > >> > > >> > Joe > >> > > >> > On Wed, Apr 15, 2020 at 11:03 PM Manny Marinho < > [email protected]> wrote: > >> >> > >> >> Attached is a screen shot of what I meant. So as you can see from the > >> >> screenshot from there I can see the stats for both domain and > >> >> individual users and I can also manage spam for both from there. > >> >> Anyway to do this with version 1.0.4a? In my case I only have one > >> >> admin account which manages the spam for all domains and users. > >> >> Although I will also create accounts for the end users but most of > >> >> them never bother to manage their spam. > >> >> > >> >> -Manny > >> >> > >> >> On Wed, Apr 15, 2020 at 5:12 PM <[email protected]> > wrote: > >> >> > > >> >> > Send Maia-users mailing list submissions to > >> >> > [email protected] > >> >> > > >> >> > To subscribe or unsubscribe via the World Wide Web, visit > >> >> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > or, via email, send a message with subject or body 'help' to > >> >> > [email protected] > >> >> > > >> >> > You can reach the person managing the list at > >> >> > [email protected] > >> >> > > >> >> > When replying, please edit your Subject line so it is more specific > >> >> > than "Re: Contents of Maia-users digest..." > >> >> > > >> >> > > >> >> > Today's Topics: > >> >> > > >> >> > 1. Re: CentOS (Manny Marinho) > >> >> > > >> >> > > >> >> > > ---------------------------------------------------------------------- > >> >> > > >> >> > Message: 1 > >> >> > Date: Wed, 15 Apr 2020 17:12:03 -0400 > >> >> > From: Manny Marinho <[email protected]> > >> >> > To: jjs - mainphrame <[email protected]> > >> >> > Cc: David Byte <[email protected]>, Maia-Users Mailing List > >> >> > <[email protected]> > >> >> > Subject: Re: [Maia-users] CentOS > >> >> > Message-ID: > >> >> > < > CANb-9Bn8g30E6Of5gvBbVi6K3_7-ZugzakKHs6ocVX4ZzUWD1Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> > >> >> > Content-Type: text/plain; charset="UTF-8" > >> >> > > >> >> > I'm also able to create users however in the older version of maia > >> >> > there was a page that would show all the domains and all the users > and > >> >> > you could see the stats for each domain and all the users as well > as > >> >> > click on an user or domain and manage the spam for either one right > >> >> > there. I'll try to find a screen shot and send you so you can see > what > >> >> > I mean. > >> >> > > >> >> > On Wed, Apr 15, 2020 at 4:31 PM jjs - mainphrame < > [email protected]> wrote: > >> >> > > > >> >> > > Ah, very interesting, thanks for the details. I'm able to create > domains and users here, but I don't use cpanel, so that's an unknown factor > in the equation. Hope things go more smoothly with the changes you've made. > >> >> > > > >> >> > > Jake > >> >> > > > >> >> > > On Wed, Apr 15, 2020 at 1:11 PM Manny Marinho < > [email protected]> wrote: > >> >> > >> > >> >> > >> Sorry about the delay Jake. I run a dedicated server that hosts > e-mail > >> >> > >> for multiple domains. I have created the various domains within > maia. > >> >> > >> I have only setup one user which is the admin user, the > customers > >> >> > >> unfortunately don't really manage their own spam so I take care > of > >> >> > >> that for them. All the domains are currently set to high > protection > >> >> > >> level. In the old maia version in addition to creating a domain > I > >> >> > >> could also create a user under that domain and manage the spam > for > >> >> > >> that user under the admin. That functionality no longer seems > to be > >> >> > >> present or perhaps it works differently now. So in the past I > could > >> >> > >> create domain.com and user-9IKiO1iGCm/[email protected] and manage the spam for > both. > >> >> > >> The reason why I would do that is because there are always some > users > >> >> > >> that are more important and/or receive more spam so this allows > for > >> >> > >> finer control. So I may create a bunch of individual users > under a > >> >> > >> particular domain then I would manage spam under the domain and > those > >> >> > >> users. I have configured the setting that allows the admin to > read > >> >> > >> mail for all users. Now I just discovered part of my issue or > perhaps > >> >> > >> the root cause is my Spamassassin install which was all messed > up on > >> >> > >> the server, I run a cpanel server and my host just engaged > cpanel to > >> >> > >> get that squared away. Now that Spamassassin is fixed it's just > >> >> > >> starting to build the bayes DB, I'm also storing the bayes data > in the > >> >> > >> maia database if that makes any difference. > >> >> > >> > >> >> > >> Apr 15 15:51:16.162 [28812] dbg: bayes: using username: amavis > >> >> > >> Apr 15 15:51:16.162 [28812] dbg: bayes: learner_new: got > >> >> > >> store=Mail::SpamAssassin::BayesStore::SQL=HASH(0x3cce0e8) > >> >> > >> Apr 15 15:51:16.162 [28812] dbg: plugin: > >> >> > >> Mail::SpamAssassin::Plugin::Bayes=HASH(0x48143f0) implements > >> >> > >> 'learner_is_scan_available', priority 0 > >> >> > >> Apr 15 15:51:16.170 [28812] dbg: bayes: database connection > established > >> >> > >> Apr 15 15:51:16.170 [28812] dbg: bayes: found bayes db version 3 > >> >> > >> Apr 15 15:51:16.171 [28812] dbg: bayes: Using userid: 1 > >> >> > >> Apr 15 15:51:16.171 [28812] dbg: bayes: not available for > scanning, > >> >> > >> only 15 spam(s) in bayes DB < 50 > >> >> > >> Apr 15 15:51:16.171 [28812] dbg: config: score set 1 chosen. > >> >> > >> Apr 15 15:51:16.172 [28812] dbg: dns: EDNS, UDP payload size > 4096 > >> >> > >> Apr 15 15:51:16.172 [28812] dbg: dns: servers obtained from > Net::DNS : > >> >> > >> [127.0.0.1]:53, [10.10.10.10]:53 > >> >> > >> Apr 15 15:51:16.172 [28812] dbg: dns: nameservers set to > 127.0.0.1, 10.10.10.10 > >> >> > >> Apr 15 15:51:16.172 [28812] dbg: dns: using socket module: > >> >> > >> IO::Socket::IP version 0.39 > >> >> > >> Apr 15 15:51:16.172 [28812] dbg: dns: is Net::DNS::Resolver > available? yes > >> >> > >> Apr 15 15:51:16.172 [28812] dbg: dns: Net::DNS version: 0.68 > >> >> > >> Apr 15 15:51:16.172 [28812] dbg: sa-learn: spamtest initialized > >> >> > >> Apr 15 15:51:16.172 [28812] dbg: plugin: > >> >> > >> Mail::SpamAssassin::Plugin::Bayes=HASH(0x48143f0) implements > >> >> > >> 'learner_dump_database', priority 0 > >> >> > >> Apr 15 15:51:16.173 [28812] dbg: bayes: database connection > established > >> >> > >> Apr 15 15:51:16.173 [28812] dbg: bayes: found bayes db version 3 > >> >> > >> Apr 15 15:51:16.173 [28812] dbg: bayes: Using userid: 1 > >> >> > >> > >> >> > >> 0.000 0 3 0 non-token data: bayes > db version > >> >> > >> 0.000 0 15 0 non-token data: nspam > >> >> > >> 0.000 0 42 0 non-token data: nham > >> >> > >> 0.000 0 12004 0 non-token data: ntokens > >> >> > >> 0.000 0 1586540621 0 non-token data: oldest > atime > >> >> > >> 0.000 0 1586980261 0 non-token data: newest > atime > >> >> > >> 0.000 0 0 0 non-token data: last > journal sync atime > >> >> > >> 0.000 0 1586533304 0 non-token data: last > expiry atime > >> >> > >> 0.000 0 0 0 non-token data: last > expire atime delta > >> >> > >> 0.000 0 0 0 non-token data: last > expire > >> >> > >> reduction count > >> >> > >> > >> >> > >> > >> >> > >> -Manny > >> >> > >> > >> >> > >> On Fri, Apr 10, 2020 at 2:25 PM jjs - mainphrame < > [email protected]> wrote: > >> >> > >> > > >> >> > >> > Just out of curiosity, what is the protection level for the > users in question? > >> >> > >> > > >> >> > >> > Jake > >> >> > >> > > >> >> > >> > On Fri, Apr 10, 2020 at 8:17 AM jjs - mainphrame < > [email protected]> wrote: > >> >> > >> >> > >> >> > >> >> Thanks for the exim details Manny - > >> >> > >> >> > >> >> > >> >> As for your spam detection, are the users in question in the > maia database? > >> >> > >> >> > >> >> > >> >> Here, I had to add the domains in order for users from those > domains to be autocreated. > >> >> > >> >> > >> >> > >> >> Jake > >> >> > >> >> > >> >> > >> >> On Fri, Apr 10, 2020 at 6:24 AM Manny Marinho < > [email protected]> wrote: > >> >> > >> >>> > >> >> > >> >>> Jake here is my exim configuration, I tried to use what > David is using > >> >> > >> >>> on my server but it didn't work for me, exim gave some > start up > >> >> > >> >>> errors. That could be related to my server though as my > current exim > >> >> > >> >>> config file is not based on the latest exim build, it's now > a few > >> >> > >> >>> updates behind. I haven't had the time to merge my config > with the > >> >> > >> >>> latest version but will do that soon. I have everything up > and running > >> >> > >> >>> now and have setup a few domains however regardless of what > protection > >> >> > >> >>> levels I'm setting (either high or even setting them > manually) no > >> >> > >> >>> messages are being cached within the maia interface at all > for any > >> >> > >> >>> domain, I also don't see anything being written to the DB. > I also use > >> >> > >> >>> the setting on all my domains to cache all non-spam which > isn't > >> >> > >> >>> happening either. There are messages hitting maia because I > see the > >> >> > >> >>> activity on the maia log but they all say Passed Clean. > This is > >> >> > >> >>> essentially the same issue I was seeing a few months ago > when I > >> >> > >> >>> decided to install and try the technion maia build. Any > ideas what may > >> >> > >> >>> be causing this or how I can figure this out? Thank you all > very much > >> >> > >> >>> for all your help. > >> >> > >> >>> > >> >> > >> >>> My Router: > >> >> > >> >>> > >> >> > >> >>> amavis: > >> >> > >> >>> driver = manualroute > >> >> > >> >>> condition = "${if eq {$interface_port}{10025} {0}{1}}" > >> >> > >> >>> condition = "${if eq {$spam_score_int}{}{1}{${if <= > >> >> > >> >>> {${spam_score_int}}{00}{0}{1}}}}" > >> >> > >> >>> domains = +local_domains > >> >> > >> >>> transport = amavis > >> >> > >> >>> route_list = "* localhost byname" > >> >> > >> >>> self = send > >> >> > >> >>> verify_recipient = false > >> >> > >> >>> > >> >> > >> >>> > >> >> > >> >>> My Transport: > >> >> > >> >>> > >> >> > >> >>> amavis: > >> >> > >> >>> driver = smtp > >> >> > >> >>> port = 10024 > >> >> > >> >>> allow_localhost > >> >> > >> >>> > >> >> > >> >>> > >> >> > >> >>> On Thu, Apr 9, 2020 at 11:52 PM jjs - mainphrame < > [email protected]> wrote: > >> >> > >> >>> > > >> >> > >> >>> > Thank you, that is useful information. I'll see if I can > build a working config with exim. > >> >> > >> >>> > > >> >> > >> >>> > Jake > >> >> > >> >>> > > >> >> > >> >>> > On Thu, Apr 9, 2020 at 3:22 PM David Byte < > [email protected]> wrote: > >> >> > >> >>> >> > >> >> > >> >>> >> I’ve got an exim config for you. > >> >> > >> >>> >> > >> >> > >> >>> >> I’ve just brought the parts salient to using Maia here. > >> >> > >> >>> >> > >> >> > >> >>> >> Start by verifying with routers that do nothing but > verify alias, mailing lists, etc. > >> >> > >> >>> >> Next pass the mail to a router that can send it to the > Maia server > >> >> > >> >>> >> > >> >> > >> >>> >> check_system_aliases: > >> >> > >> >>> >> driver = redirect > >> >> > >> >>> >> allow_fail > >> >> > >> >>> >> allow_defer > >> >> > >> >>> >> data = ${lookup{$local_part}lsearch{/etc/aliases}} > >> >> > >> >>> >> verify_only > >> >> > >> >>> >> pass_router = amavis > >> >> > >> >>> >> > >> >> > >> >>> >> > >> >> > >> >>> >> And here is the amavis router > >> >> > >> >>> >> amavis: > >> >> > >> >>> >> # Do NOT run if received via 10025/tcp or if already > spam-scanned > >> >> > >> >>> >> # or if bounce message ($sender_address="") > >> >> > >> >>> >> condition = "${if or {{eq {$interface_port}{10025}} \ > >> >> > >> >>> >> {eq {$received_protocol}{spam-scanned}}\ > >> >> > >> >>> >> {eq {$received_protocol}{local}}\ > >> >> > >> >>> >> {eq {$sender_address}{}} \ > >> >> > >> >>> >> }{0}{1} }" > >> >> > >> >>> >> transport = amavis > >> >> > >> >>> >> route_list = "* mailguard.myhost.net byname" > >> >> > >> >>> >> self = send > >> >> > >> >>> >> > >> >> > >> >>> >> > >> >> > >> >>> >> And this in my transport definition > >> >> > >> >>> >> amavis: > >> >> > >> >>> >> driver = smtp > >> >> > >> >>> >> port = 10024 > >> >> > >> >>> >> > >> >> > >> >>> >> > >> >> > >> >>> >> I hope this helps > >> >> > >> >>> >> > >> >> > >> >>> >> On Apr 9, 2020, at 4:54 PM, jjs - mainphrame < > [email protected]> wrote: > >> >> > >> >>> >> > >> >> > >> >>> >> Manny, > >> >> > >> >>> >> > >> >> > >> >>> >> I'd love to see your exim configuration, for future > reference. I've always used postfix, but it would be nice to know of a > working exim configuration, since more choice is good for all of us. > >> >> > >> >>> >> > >> >> > >> >>> >> Jake > >> >> > >> >>> >> > >> >> > >> >>> >> On Thu, Apr 9, 2020 at 8:35 AM Manny Marinho < > [email protected]> wrote: > >> >> > >> >>> >>> > >> >> > >> >>> >>> Hi Jake thanks for the reply. I was able to fix that > problem, it > >> >> > >> >>> >>> appears it was a permissions issue. I ran "maiad debug" > and saw this > >> >> > >> >>> >>> error: > >> >> > >> >>> >>> > >> >> > >> >>> >>> Apr 8 19:52:59 mydomain.com ./maiad[18270]: TROUBLE > in pre_loop_hook: > >> >> > >> >>> >>> TEMPBASE directory is not writable: /var/lib/maia/tmp > at ./maiad line > >> >> > >> >>> >>> 8491. > >> >> > >> >>> >>> > >> >> > >> >>> >>> Suicide () TROUBLE in pre_loop_hook: TEMPBASE directory > is not > >> >> > >> >>> >>> writable: /var/lib/maia/tmp at ./maiad line 8491. > >> >> > >> >>> >>> > >> >> > >> >>> >>> The daemon now starts and runs normally under CentOS 6 > and PHP 7.2. I > >> >> > >> >>> >>> am having another issue however. My configtest.pl > tests fine and so > >> >> > >> >>> >>> does the web configtest.php. I'm using your supplied > Smarty version. I > >> >> > >> >>> >>> created a new maia DB using your manual steps below > which produced one > >> >> > >> >>> >>> error however I don't believe this is significant or > the root cause of > >> >> > >> >>> >>> my problem, > >> >> > >> >>> >>> > >> >> > >> >>> >>> [root@host # mysqladmin create maia > >> >> > >> >>> >>> > >> >> > >> >>> >>> [root@host # mysql maia < maia-mysql.sql > >> >> > >> >>> >>> > >> >> > >> >>> >>> ERROR 1366 (22007) at line 716: Incorrect string value: > '\xC2\x9Atina' > >> >> > >> >>> >>> for column `maia`.`maia_languages`.`language_name` at > row 1 > >> >> > >> >>> >>> > >> >> > >> >>> >>> I also ran the below afterwards since I use amavis as > my maia user, > >> >> > >> >>> >>> > >> >> > >> >>> >>> [root]# mysql -u root -p password > >> >> > >> >>> >>> > >> >> > >> >>> >>> mysql> GRANT CREATE, DROP, ALTER, SELECT, INSERT, > UPDATE, DELETE ON > >> >> > >> >>> >>> maia.* TO amavis@localhost IDENTIFIED BY 'mypassword'; > >> >> > >> >>> >>> > >> >> > >> >>> >>> My problem now is I can't run internal-init.php or > >> >> > >> >>> >>> login.php?super=register as both produce the error: > >> >> > >> >>> >>> > >> >> > >> >>> >>> Error with themes: theme not found or permissions > problem. > >> >> > >> >>> >>> > >> >> > >> >>> >>> The maia error log shows some generic errors which I > don't believe are > >> >> > >> >>> >>> causing any issue. > >> >> > >> >>> >>> > >> >> > >> >>> >>> [09-Apr-2020 08:28:19 America/Los_Angeles] PHP > Deprecated: Methods > >> >> > >> >>> >>> with the same name as their class will not be > constructors in a future > >> >> > >> >>> >>> version of PHP; ThemeSmarty has a deprecated > constructor in > >> >> > >> >>> >>> /home/folder/public_html/maia/smarty.php on line 85 > >> >> > >> >>> >>> [09-Apr-2020 08:28:19 America/Los_Angeles] PHP > Deprecated: Methods > >> >> > >> >>> >>> with the same name as their class will not be > constructors in a future > >> >> > >> >>> >>> version of PHP; Smarty has a deprecated constructor in > >> >> > >> >>> >>> /usr/local/lib/php/Smarty2/Smarty.class.php on line 64 > >> >> > >> >>> >>> > >> >> > >> >>> >>> All my web facing files sit in > /home/folder/public_html/maia/ instead > >> >> > >> >>> >>> of /var/www/html/maia/ this is very similar to an old > maia setup I > >> >> > >> >>> >>> used to have running in the past. > >> >> > >> >>> >>> > >> >> > >> >>> >>> > >> >> > >> >>> >>> -Manny > >> >> > >> >>> >>> > >> >> > >> >>> >>> On Wed, Apr 8, 2020 at 11:11 PM < > [email protected]> wrote: > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > Send Maia-users mailing list submissions to > >> >> > >> >>> >>> > [email protected] > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > To subscribe or unsubscribe via the World Wide Web, > visit > >> >> > >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > or, via email, send a message with subject or body > 'help' to > >> >> > >> >>> >>> > [email protected] > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > You can reach the person managing the list at > >> >> > >> >>> >>> > [email protected] > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > When replying, please edit your Subject line so it is > more specific > >> >> > >> >>> >>> > than "Re: Contents of Maia-users digest..." > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > Today's Topics: > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > 1. CentOS 6 (Manny Marinho) > >> >> > >> >>> >>> > 2. Re: CentOS 6 (jjs - mainphrame) > >> >> > >> >>> >>> > 3. Re: CentOS 6 (Ed) > >> >> > >> >>> >>> > 4. Re: CentOS 6 (Lawrence Mulder) > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > > ---------------------------------------------------------------------- > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > Message: 1 > >> >> > >> >>> >>> > Date: Wed, 8 Apr 2020 18:21:38 -0400 > >> >> > >> >>> >>> > From: Manny Marinho <[email protected]> > >> >> > >> >>> >>> > To: [email protected] > >> >> > >> >>> >>> > Subject: [Maia-users] CentOS 6 > >> >> > >> >>> >>> > Message-ID: < > E3A2C447-0C18-41B5-B670-EEDE3182B00C-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > >> >> > >> >>> >>> > Content-Type: text/plain; charset=utf-8 > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > I know it’s end of life but has anybody gotten this > to work with CentOS 6? I’ve tried to use the installer for CentOS 7 which > appears to work for the most part although my MTA is exim and I’m familiar > with the exim config part from using the original maia version. Seems the > issue that I’m seeing is the maia daemon won’t start or nothing happens > when you try to run it manually. > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > -Manny > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > > On Apr 8, 2020, at 3:00 PM, > [email protected] wrote: > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > Send Maia-users mailing list submissions to > >> >> > >> >>> >>> > > [email protected] > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > To subscribe or unsubscribe via the World Wide Web, > visit > >> >> > >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > or, via email, send a message with subject or body > 'help' to > >> >> > >> >>> >>> > > [email protected] > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > You can reach the person managing the list at > >> >> > >> >>> >>> > > [email protected] > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > When replying, please edit your Subject line so it > is more specific > >> >> > >> >>> >>> > > than "Re: Contents of Maia-users digest..." > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > Today's Topics: > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > 1. maia on suse leap 15.1 (jjs - mainphrame) > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > > ---------------------------------------------------------------------- > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > Message: 1 > >> >> > >> >>> >>> > > Date: Tue, 7 Apr 2020 21:35:12 -0700 > >> >> > >> >>> >>> > > From: jjs - mainphrame <[email protected]> > >> >> > >> >>> >>> > > To: [email protected] > >> >> > >> >>> >>> > > Subject: [Maia-users] maia on suse leap 15.1 > >> >> > >> >>> >>> > > Message-ID: > >> >> > >> >>> >>> > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN= > [email protected]> > >> >> > >> >>> >>> > > Content-Type: text/plain; charset="utf-8" > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > Hi folks, > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > My goal today was to achieve a working maia install > on suse leap 15.1 > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > It comes as no surprise that the perl parts all > work perfectly and > >> >> > >> >>> >>> > > configtest.pl is fine. > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > But I'm seeing weird errors with php and pear. The > pear modules are > >> >> > >> >>> >>> > > installed, pear list shows them, but configtest.php > can't find them. > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > I'll keep chipping away at it, but thought I'd > check to see if anyone on > >> >> > >> >>> >>> > > the list has had any luck with maia on suse leap > and php 7.x, or any words > >> >> > >> >>> >>> > > of wisdom on that score - > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > Cheers, > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > Jake > >> >> > >> >>> >>> > > -------------- next part -------------- > >> >> > >> >>> >>> > > An HTML attachment was scrubbed... > >> >> > >> >>> >>> > > URL: < > http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html > > > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > ------------------------------ > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > Subject: Digest Footer > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > _______________________________________________ > >> >> > >> >>> >>> > > Maia-users mailing list > >> >> > >> >>> >>> > > [email protected] > >> >> > >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > ------------------------------ > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > End of Maia-users Digest, Vol 171, Issue 2 > >> >> > >> >>> >>> > > ****************************************** > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > ------------------------------ > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > Message: 2 > >> >> > >> >>> >>> > Date: Wed, 8 Apr 2020 16:29:52 -0700 > >> >> > >> >>> >>> > From: jjs - mainphrame <[email protected]> > >> >> > >> >>> >>> > To: Manny Marinho <[email protected]> > >> >> > >> >>> >>> > Cc: [email protected] > >> >> > >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 > >> >> > >> >>> >>> > Message-ID: > >> >> > >> >>> >>> > > <CABkzw7xVWngB0zT7JAR5LQ2rd+bYxfGHSYNU5C1rWazHoXX=CA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> > >> >> > >> >>> >>> > Content-Type: text/plain; charset="utf-8" > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > Does configtest.pl work? When you start maiad by > hand, are there any > >> >> > >> >>> >>> > errors? I think I've run maia on centos 6 in the past. > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > Jake > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho < > [email protected]> > >> >> > >> >>> >>> > wrote: > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > > I know it’s end of life but has anybody gotten this > to work with CentOS 6? > >> >> > >> >>> >>> > > I’ve tried to use the installer for CentOS 7 which > appears to work for the > >> >> > >> >>> >>> > > most part although my MTA is exim and I’m familiar > with the exim config > >> >> > >> >>> >>> > > part from using the original maia version. Seems > the issue that I’m seeing > >> >> > >> >>> >>> > > is the maia daemon won’t start or nothing happens > when you try to run it > >> >> > >> >>> >>> > > manually. > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > -Manny > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > > On Apr 8, 2020, at 3:00 PM, > [email protected] wrote: > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Send Maia-users mailing list submissions to > >> >> > >> >>> >>> > > > [email protected] > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > To subscribe or unsubscribe via the World Wide > Web, visit > >> >> > >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > or, via email, send a message with subject or > body 'help' to > >> >> > >> >>> >>> > > > [email protected] > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > You can reach the person managing the list at > >> >> > >> >>> >>> > > > [email protected] > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > When replying, please edit your Subject line so > it is more specific > >> >> > >> >>> >>> > > > than "Re: Contents of Maia-users digest..." > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Today's Topics: > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > 1. maia on suse leap 15.1 (jjs - mainphrame) > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > ---------------------------------------------------------------------- > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Message: 1 > >> >> > >> >>> >>> > > > Date: Tue, 7 Apr 2020 21:35:12 -0700 > >> >> > >> >>> >>> > > > From: jjs - mainphrame <[email protected]> > >> >> > >> >>> >>> > > > To: [email protected] > >> >> > >> >>> >>> > > > Subject: [Maia-users] maia on suse leap 15.1 > >> >> > >> >>> >>> > > > Message-ID: > >> >> > >> >>> >>> > > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN= > [email protected]> > >> >> > >> >>> >>> > > > Content-Type: text/plain; charset="utf-8" > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Hi folks, > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > My goal today was to achieve a working maia > install on suse leap 15.1 > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > It comes as no surprise that the perl parts all > work perfectly and > >> >> > >> >>> >>> > > > configtest.pl is fine. > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > But I'm seeing weird errors with php and pear. > The pear modules are > >> >> > >> >>> >>> > > > installed, pear list shows them, but > configtest.php can't find them. > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > I'll keep chipping away at it, but thought I'd > check to see if anyone on > >> >> > >> >>> >>> > > > the list has had any luck with maia on suse leap > and php 7.x, or any > >> >> > >> >>> >>> > > words > >> >> > >> >>> >>> > > > of wisdom on that score - > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Cheers, > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Jake > >> >> > >> >>> >>> > > > -------------- next part -------------- > >> >> > >> >>> >>> > > > An HTML attachment was scrubbed... > >> >> > >> >>> >>> > > > URL: < > >> >> > >> >>> >>> > > > http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > ------------------------------ > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Subject: Digest Footer > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > _______________________________________________ > >> >> > >> >>> >>> > > > Maia-users mailing list > >> >> > >> >>> >>> > > > [email protected] > >> >> > >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > ------------------------------ > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > End of Maia-users Digest, Vol 171, Issue 2 > >> >> > >> >>> >>> > > > ****************************************** > >> >> > >> >>> >>> > > _______________________________________________ > >> >> > >> >>> >>> > > Maia-users mailing list > >> >> > >> >>> >>> > > [email protected] > >> >> > >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > -------------- next part -------------- > >> >> > >> >>> >>> > An HTML attachment was scrubbed... > >> >> > >> >>> >>> > URL: < > http://www.renaissoft.com/pipermail/maia-users/attachments/20200408/615d172d/attachment-0001.html > > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > ------------------------------ > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > Message: 3 > >> >> > >> >>> >>> > Date: Wed, 8 Apr 2020 23:07:42 -0400 > >> >> > >> >>> >>> > From: Ed <ed-9FOcALY/[email protected]> > >> >> > >> >>> >>> > To: [email protected] > >> >> > >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 > >> >> > >> >>> >>> > Message-ID: < > e296fe44-de83-5e2c-3e78-6ca3dc6d6d62-9FOcALY/[email protected]> > >> >> > >> >>> >>> > Content-Type: text/plain; charset=utf-8; format=flowed > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > I've been running maia on centos6 for years and it > works just fine. > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > --Ed > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > On 4/8/20 7:29 PM, jjs - mainphrame wrote: > >> >> > >> >>> >>> > > Does configtest.pl <http://configtest.pl> work? > When you start maiad by > >> >> > >> >>> >>> > > hand, are there any errors? I think I've run maia > on centos 6 in the past. > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > Jake > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho < > [email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]>> wrote: > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > I know it’s end of life but has anybody gotten > this to work with > >> >> > >> >>> >>> > > CentOS 6? I’ve tried to use the installer for > CentOS 7 which appears > >> >> > >> >>> >>> > > to work for the most part although my MTA is > exim and I’m familiar > >> >> > >> >>> >>> > > with the exim config part from using the > original maia version. > >> >> > >> >>> >>> > > Seems the issue that I’m seeing is the maia > daemon won’t start or > >> >> > >> >>> >>> > > nothing happens when you try to run it manually. > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > -Manny > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > > On Apr 8, 2020, at 3:00 PM, > [email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]> > wrote: > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Send Maia-users mailing list submissions to > >> >> > >> >>> >>> > > > [email protected] <mailto: > [email protected]> > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > To subscribe or unsubscribe via the World > Wide Web, visit > >> >> > >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > or, via email, send a message with subject > or body 'help' to > >> >> > >> >>> >>> > > > [email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]> > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > You can reach the person managing the list at > >> >> > >> >>> >>> > > > [email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]> > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > When replying, please edit your Subject line > so it is more specific > >> >> > >> >>> >>> > > > than "Re: Contents of Maia-users digest..." > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Today's Topics: > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > 1. maia on suse leap 15.1 (jjs - > mainphrame) > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > ---------------------------------------------------------------------- > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Message: 1 > >> >> > >> >>> >>> > > > Date: Tue, 7 Apr 2020 21:35:12 -0700 > >> >> > >> >>> >>> > > > From: jjs - mainphrame <[email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]>> > >> >> > >> >>> >>> > > > To: [email protected] <mailto: > [email protected]> > >> >> > >> >>> >>> > > > Subject: [Maia-users] maia on suse leap 15.1 > >> >> > >> >>> >>> > > > Message-ID: > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN= > [email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]>> > >> >> > >> >>> >>> > > > Content-Type: text/plain; charset="utf-8" > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Hi folks, > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > My goal today was to achieve a working maia > install on suse leap 15.1 > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > It comes as no surprise that the perl parts > all work perfectly and > >> >> > >> >>> >>> > > > configtest.pl <http://configtest.pl> is > fine. > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > But I'm seeing weird errors with php and > pear. The pear modules are > >> >> > >> >>> >>> > > > installed, pear list shows them, but > configtest.php can't find them. > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > I'll keep chipping away at it, but thought > I'd check to see if > >> >> > >> >>> >>> > > anyone on > >> >> > >> >>> >>> > > > the list has had any luck with maia on suse > leap and php 7.x, or > >> >> > >> >>> >>> > > any words > >> >> > >> >>> >>> > > > of wisdom on that score - > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Cheers, > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Jake > >> >> > >> >>> >>> > > > -------------- next part -------------- > >> >> > >> >>> >>> > > > An HTML attachment was scrubbed... > >> >> > >> >>> >>> > > > URL: > >> >> > >> >>> >>> > > < > http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > ------------------------------ > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Subject: Digest Footer > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > _______________________________________________ > >> >> > >> >>> >>> > > > Maia-users mailing list > >> >> > >> >>> >>> > > > [email protected] <mailto: > [email protected]> > >> >> > >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > ------------------------------ > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > End of Maia-users Digest, Vol 171, Issue 2 > >> >> > >> >>> >>> > > > ****************************************** > >> >> > >> >>> >>> > > _______________________________________________ > >> >> > >> >>> >>> > > Maia-users mailing list > >> >> > >> >>> >>> > > [email protected] <mailto: > [email protected]> > >> >> > >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > _______________________________________________ > >> >> > >> >>> >>> > > Maia-users mailing list > >> >> > >> >>> >>> > > [email protected] > >> >> > >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > ------------------------------ > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > Message: 4 > >> >> > >> >>> >>> > Date: Thu, 9 Apr 2020 03:11:41 +0000 > >> >> > >> >>> >>> > From: Lawrence Mulder <lmulder-iL7gtBVyNKCGUxFv0Br65wC/[email protected]> > >> >> > >> >>> >>> > To: Ed <ed-9FOcALY/[email protected]>, Maia-users_renaissoft.com > >> >> > >> >>> >>> > <[email protected]> > >> >> > >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 > >> >> > >> >>> >>> > Message-ID: < > tbenk20b1iclu95a3oln4e0p.1586401899912-iL7gtBVyNKCGUxFv0Br65wC/[email protected]> > >> >> > >> >>> >>> > Content-Type: text/plain; charset="utf-8" > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > Ed, > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > I was going to say the same thing, but I use version > 1.0.2c, I think? I assume he is trying to use the latest 1.0.4 stuff being > talked about on this list recently, but I'm not sure, LOL. I have never > tried the centos 7 / Debian latest maia on centos 6. > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > Thanks, > >> >> > >> >>> >>> > -Larry > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > From: ed-9FOcALY/[email protected] > >> >> > >> >>> >>> > Sent: April 8, 2020 10:07 PM > >> >> > >> >>> >>> > To: [email protected] > >> >> > >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > I've been running maia on centos6 for years and it > works just fine. > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > --Ed > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > On 4/8/20 7:29 PM, jjs - mainphrame wrote: > >> >> > >> >>> >>> > > Does configtest.pl <http://configtest.pl> work? > When you start maiad by > >> >> > >> >>> >>> > > hand, are there any errors? I think I've run maia > on centos 6 in the past. > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > Jake > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho < > [email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]>> wrote: > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > I know it’s end of life but has anybody gotten > this to work with > >> >> > >> >>> >>> > > CentOS 6? I’ve tried to use the installer for > CentOS 7 which appears > >> >> > >> >>> >>> > > to work for the most part although my MTA is > exim and I’m familiar > >> >> > >> >>> >>> > > with the exim config part from using the > original maia version. > >> >> > >> >>> >>> > > Seems the issue that I’m seeing is the maia > daemon won’t start or > >> >> > >> >>> >>> > > nothing happens when you try to run it manually. > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > -Manny > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > > On Apr 8, 2020, at 3:00 PM, > [email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]> > wrote: > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Send Maia-users mailing list submissions to > >> >> > >> >>> >>> > > > [email protected] <mailto: > [email protected]> > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > To subscribe or unsubscribe via the World > Wide Web, visit > >> >> > >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > or, via email, send a message with subject > or body 'help' to > >> >> > >> >>> >>> > > > [email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]> > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > You can reach the person managing the list at > >> >> > >> >>> >>> > > > [email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]> > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > When replying, please edit your Subject line > so it is more specific > >> >> > >> >>> >>> > > > than "Re: Contents of Maia-users digest..." > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Today's Topics: > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > 1. maia on suse leap 15.1 (jjs - > mainphrame) > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > ---------------------------------------------------------------------- > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Message: 1 > >> >> > >> >>> >>> > > > Date: Tue, 7 Apr 2020 21:35:12 -0700 > >> >> > >> >>> >>> > > > From: jjs - mainphrame <[email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]>> > >> >> > >> >>> >>> > > > To: [email protected] <mailto: > [email protected]> > >> >> > >> >>> >>> > > > Subject: [Maia-users] maia on suse leap 15.1 > >> >> > >> >>> >>> > > > Message-ID: > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN= > [email protected] > >> >> > >> >>> >>> > > <mailto:[email protected]>> > >> >> > >> >>> >>> > > > Content-Type: text/plain; charset="utf-8" > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Hi folks, > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > My goal today was to achieve a working maia > install on suse leap 15.1 > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > It comes as no surprise that the perl parts > all work perfectly and > >> >> > >> >>> >>> > > > configtest.pl <http://configtest.pl> is > fine. > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > But I'm seeing weird errors with php and > pear. The pear modules are > >> >> > >> >>> >>> > > > installed, pear list shows them, but > configtest.php can't find them. > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > I'll keep chipping away at it, but thought > I'd check to see if > >> >> > >> >>> >>> > > anyone on > >> >> > >> >>> >>> > > > the list has had any luck with maia on suse > leap and php 7.x, or > >> >> > >> >>> >>> > > any words > >> >> > >> >>> >>> > > > of wisdom on that score - > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Cheers, > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Jake > >> >> > >> >>> >>> > > > -------------- next part -------------- > >> >> > >> >>> >>> > > > An HTML attachment was scrubbed... > >> >> > >> >>> >>> > > > URL: > >> >> > >> >>> >>> > > < > http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > ------------------------------ > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > Subject: Digest Footer > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > _______________________________________________ > >> >> > >> >>> >>> > > > Maia-users mailing list > >> >> > >> >>> >>> > > > [email protected] <mailto: > [email protected]> > >> >> > >> >>> >>> > > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > ------------------------------ > >> >> > >> >>> >>> > > > > >> >> > >> >>> >>> > > > End of Maia-users Digest, Vol 171, Issue 2 > >> >> > >> >>> >>> > > > ****************************************** > >> >> > >> >>> >>> > > _______________________________________________ > >> >> > >> >>> >>> > > Maia-users mailing list > >> >> > >> >>> >>> > > [email protected] <mailto: > [email protected]> > >> >> > >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > _______________________________________________ > >> >> > >> >>> >>> > > Maia-users mailing list > >> >> > >> >>> >>> > > [email protected] > >> >> > >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > _______________________________________________ > >> >> > >> >>> >>> > Maia-users mailing list > >> >> > >> >>> >>> > [email protected] > >> >> > >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > -------------- next part -------------- > >> >> > >> >>> >>> > An HTML attachment was scrubbed... > >> >> > >> >>> >>> > URL: < > http://www.renaissoft.com/pipermail/maia-users/attachments/20200409/16d3e7df/attachment.html > > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > ------------------------------ > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > Subject: Digest Footer > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > _______________________________________________ > >> >> > >> >>> >>> > Maia-users mailing list > >> >> > >> >>> >>> > [email protected] > >> >> > >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > ------------------------------ > >> >> > >> >>> >>> > > >> >> > >> >>> >>> > End of Maia-users Digest, Vol 171, Issue 3 > >> >> > >> >>> >>> > ****************************************** > >> >> > >> >>> >>> _______________________________________________ > >> >> > >> >>> >>> Maia-users mailing list > >> >> > >> >>> >>> [email protected] > >> >> > >> >>> >>> > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >> > >> >> > >> >>> >> _______________________________________________ > >> >> > >> >>> >> Maia-users mailing list > >> >> > >> >>> >> [email protected] > >> >> > >> >>> >> > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > >> >>> >> > >> >> > >> >>> >> > >> >> > > >> >> > > >> >> > ------------------------------ > >> >> > > >> >> > Subject: Digest Footer > >> >> > > >> >> > _______________________________________________ > >> >> > Maia-users mailing list > >> >> > [email protected] > >> >> > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > >> >> > > >> >> > > >> >> > ------------------------------ > >> >> > > >> >> > End of Maia-users Digest, Vol 171, Issue 21 > >> >> > ******************************************* > >> >> _______________________________________________ > >> >> Maia-users mailing list > >> >> [email protected] > >> >> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users > _______________________________________________ Maia-users mailing list [email protected] http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users