Re: Maia Guard and Freebsd 12. Problems with PHP..ini

OK Appreciate all the help but I am now completely confused


To recap.  I down grade to Smarty 2.0

It is is located in /usr/local/share/smarty 

Php.ini (one and only at /usr/local/etc/php.ini)

Has the following 

include_path = "/usr/local/share/pear:/usr/local/share/smarty"

Configuration failed for Smart Template Engine

There is also a comment here that says

"here should be a symbolic link to "/usr/local/share/smarty3-php72" from "libs/Smarty". For example, in my "/usr/local/www/maia/libs" directory, there is a symlink that looks like "Smarty@ -> /usr/local/share/smarty3-php72". “

I am using smarty2. And this would appear to start the issue with case sensitivity again


Thought for a confused old man??
Jason

> On Apr 22, 2020, at 1:13 PM, jjs - mainphrame <[email protected]> wrote:
> 
> From what you have written, it looks like you're very close to working, There's just one thing you haven't done.
> 
> Make sure that maia finds "Smarty/Smarty.class.php" in the path. If that doesn't fix the problem, I'd be shocked.
> 
> Jake
> 
> 
> 
> On Wed, Apr 22, 2020 at 10:10 AM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote:
> I have made the mistake of following too many courses of action and advice at once
> 
> The maia installations is pretty much hosed. 
> 
> 
> Have to step back and look at how to recover
> 
> 
> Jason
> 
>> On Apr 22, 2020, at 12:03 PM, jjs - mainphrame <[email protected] <mailto:[email protected]>> wrote:
>> 
>> 'smarty" won't work. I just did a quick test on my local maia server. 
>> 
>> This works:
>> 
>> # ll /usr/share/php/
>> 
>> lrwxrwxrwx. 1 root root    8 Apr 22 09:00 Smarty -> Smarty2/
>> drwxr-xr-x. 4 root root 4096 Mar 22 11:41 Smarty2
>> 
>> This fails:
>> 
>> # ll /usr/share/php/
>> 
>> lrwxrwxrwx. 1 root root    8 Apr 22 09:00 smarty -> Smarty2/
>> drwxr-xr-x. 4 root root 4096 Mar 22 11:41 Smarty2
>> 
>> On Wed, Apr 22, 2020 at 8:49 AM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote:
>> The directory is lower case   “smarty”
>> 
>> The file is Uppercase. “Smarty.class.php”
>> 
>> Jason
>> 
>>> On Apr 22, 2020, at 11:43 AM, jjs - mainphrame <[email protected] <mailto:[email protected]>> wrote:
>>> 
>>> Keep in mind that it's case sensitive. "smarty" != "Smarty"
>>> 
>>> Jake
>>> 
>>> On Wed, Apr 22, 2020 at 8:40 AM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote:
>>> Jake
>>> 
>>> Path to that on my server is   "/usr/local/share/smarty/Smarty.class.php"
>>> 
>>> So I should have that covered unless the following is wrong
>>> 
>>>  include_path = "/usr/local/share/pear:/usr/local/share/smarty"
>>> 
>>> Thank again
>>> 
>>> 
>>> Jason
>>> 
>>> 
>>> 
>>>> On Apr 22, 2020, at 10:44 AM, jjs - mainphrame <[email protected] <mailto:[email protected]>> wrote:
>>>> 
>>>> Remember, it's looking specifically for "Smarty/Smarty.class.php" (case sensitive)
>>>> 
>>>> Jake
>>>> 
>>>> On Wed, Apr 22, 2020 at 5:50 AM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote:
>>>> Ok. New day tried again
>>>> 
>>>> Removed smarty 3 and installed smarty 2 which installed under /usr/local/share/smarty
>>>> 
>>>> Using include_path = "/usr/local/share/pear:/usr/local/share/smarty"
>>>> 
>>>> Pear is loaded happy but no smarty according to the configtest.pl <http://configtest.pl/>
>>>> 
>>>> Can’t get any access to Smarty Mailing list or Forum
>>>> 
>>>> Took me a month to get Maia installed originally   now its dead after a simple upgrade
>>>> 
>>>> 
>>>> Jason
>>>> 
>>>> 
>>>> 
>>>>> 
>>>>> In general, I find that Smarty3 breaks maia, and I've always had to install Smarty2 to get a 100% working setup.
>>>>> 
>>>>> I've always installed Smarty under /usr/share/php. Do you have a single php.ini for cli and web versions?
>>>>> 
>>>>> Jake
>>>>> 
>>>>> On Tue, Apr 21, 2020 at 2:37 PM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote:
>>>>>  And SmartI recently upgraded my Server running Freebsd 12.1 1. PHP.   7.2.29   PEAR 1.10.6    and smarty3-php72-3.1.32  
>>>>> 
>>>>> 
>>>>> My Configuration tester says that all is OK except for smarty.  I think I am messing up the php.ini. include_path
>>>>> 
>>>>> 
>>>>> My current is
>>>>> 
>>>>> include_path = "/usr/local/share/pear:/usr/local/share/smarty3-php72” 
>>>>> 
>>>>> The Maia config test is happy except for Smarty. Where it says “Failed Not Installed”.  The reference page has been no help
>>>>> 
>>>>> Any suggestions??
>>>>> 
>>>>> Jason
>>>>> _______________________________________________
>>>>> Maia-users mailing list
>>>>> [email protected] <mailto:[email protected]>
>>>>> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users <http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users>
>>>> 
>>> 
>> 
>

_______________________________________________
Maia-users mailing list
[email protected]
http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users