Re: Maia Guard and Freebsd 12. Problems with PHP..ini
Jason Hirsh <[email protected]>
| Newsgroups | gmane.mail.virus.maiamailguard |
|---|---|
| Message-ID | <[email protected]> |
OK now don’t feel so good Going to quit till tomorrow. I am back beyond confused > On Apr 22, 2020, at 2:46 PM, jjs - mainphrame <[email protected]> wrote: > > If the directory is already named "Smarty" then there is no need for a symbolic link. > > The symlink would have been needed if the directory was named "smarty", "smarty3-php72" or anything other than "Smarty" > > What does configtest,php say now? > > jake > > On Wed, Apr 22, 2020 at 11:42 AM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote: > OK. I changed the Smarty 2 directory to Smarty since that seem easier then rewriting Smarty > > (See jjs - mainphrame <[email protected] <mailto:[email protected]>>) > > Changed the path to > > include_path = "/usr/local/share/pear:/usr/local/share” > > Lawrence Mulder <lmulder-iL7gtBVyNKCGUxFv0Br65wC/[email protected] <mailto:lmulder-iL7gtBVyNKCGUxFv0Br65wC/[email protected]>> > > > Bit I am confused on the symbolic link > > > ln -s /usr/local/share/smarty Smarty > jjs - mainphrame <[email protected] <mailto:[email protected]>> > > Shouldn’t that now be > > > ln -s /usr/local/share/Smarty Smarty > > > Thanks guys > > > Jason >> On Apr 22, 2020, at 2:25 PM, Lawrence Mulder <lmulder-iL7gtBVyNKCGUxFv0Br65wC/[email protected] <mailto:lmulder-iL7gtBVyNKCGUxFv0Br65wC/[email protected]>> wrote: >> >> Jason, >> >> I think what Derek is saying, is that you have the smarty directory included in your include_path… it should only be the parent directory. You want to find the smarty folder at that include_path, not the smarty files. So, shorten your include_path to: >> >> include_path = "/usr/local/share/pear:/usr/local/share” >> >> Thanks, >> -Larry >> >> From: Maia-users <[email protected] <mailto:[email protected]>> On Behalf Of Jason Hirsh >> Sent: Wednesday, April 22, 2020 1:04 PM >> To: Derek Atkins <[email protected] <mailto:[email protected]>> >> Cc: Maia-Users Mailing List <[email protected] <mailto:[email protected]>> >> Subject: Re: [Maia-users] Maia Guard and Freebsd 12. Problems with PHP..ini >> >> Doesn’t this do that ?? >> >> >> include_path = "/usr/local/share/pear:/usr/local/share/smarty” >> >> >> Jason >> >> >> On Apr 22, 2020, at 2:00 PM, Derek Atkins <[email protected] <mailto:[email protected]>> wrote: >> >> Add /usr/local/share to the list so that smarty/Smarty.php can be found. >> >> -derek >> Sent using my mobile device. Please excuse any typos. >> >> On April 22, 2020 1:58:14 PM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote: >> >> OK Appreciate all the help but I am now completely confused >> >> >> To recap. I down grade to Smarty 2.0 >> >> It is is located in /usr/local/share/smarty >> >> Php.ini (one and only at /usr/local/etc/php.ini) >> >> Has the following >> >> include_path = "/usr/local/share/pear:/usr/local/share/smarty" >> >> Configuration failed for Smart Template Engine >> >> There is also a comment here that says >> >> "here should be a symbolic link to "/usr/local/share/smarty3-php72" from "libs/Smarty". For example, in my "/usr/local/www/maia/libs" directory, there is a symlink that looks like "Smarty@ -> /usr/local/share/smarty3-php72". “ >> >> I am using smarty2. And this would appear to start the issue with case sensitivity again >> >> >> Thought for a confused old man?? >> Jason >> >> >> On Apr 22, 2020, at 1:13 PM, jjs - mainphrame <[email protected] <mailto:[email protected]>> wrote: >> >> From what you have written, it looks like you're very close to working, There's just one thing you haven't done. >> >> Make sure that maia finds "Smarty/Smarty.class.php" in the path. If that doesn't fix the problem, I'd be shocked. >> >> Jake >> >> >> >> On Wed, Apr 22, 2020 at 10:10 AM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote: >> I have made the mistake of following too many courses of action and advice at once >> >> The maia installations is pretty much hosed. >> >> >> Have to step back and look at how to recover >> >> >> Jason >> >> >> On Apr 22, 2020, at 12:03 PM, jjs - mainphrame <[email protected] <mailto:[email protected]>> wrote: >> >> 'smarty" won't work. I just did a quick test on my local maia server. >> >> This works: >> >> # ll /usr/share/php/ >> >> lrwxrwxrwx. 1 root root 8 Apr 22 09:00 Smarty -> Smarty2/ >> drwxr-xr-x. 4 root root 4096 Mar 22 11:41 Smarty2 >> >> This fails: >> >> # ll /usr/share/php/ >> >> lrwxrwxrwx. 1 root root 8 Apr 22 09:00 smarty -> Smarty2/ >> drwxr-xr-x. 4 root root 4096 Mar 22 11:41 Smarty2 >> >> On Wed, Apr 22, 2020 at 8:49 AM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote: >> The directory is lower case “smarty” >> >> The file is Uppercase. “Smarty.class.php” >> >> Jason >> >> >> On Apr 22, 2020, at 11:43 AM, jjs - mainphrame <[email protected] <mailto:[email protected]>> wrote: >> >> Keep in mind that it's case sensitive. "smarty" != "Smarty" >> >> Jake >> >> On Wed, Apr 22, 2020 at 8:40 AM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote: >> Jake >> >> Path to that on my server is "/usr/local/share/smarty/Smarty.class.php" >> >> So I should have that covered unless the following is wrong >> >> include_path = "/usr/local/share/pear:/usr/local/share/smarty" >> >> Thank again >> >> >> Jason >> >> >> >> >> On Apr 22, 2020, at 10:44 AM, jjs - mainphrame <[email protected] <mailto:[email protected]>> wrote: >> >> Remember, it's looking specifically for "Smarty/Smarty.class.php" (case sensitive) >> >> Jake >> >> On Wed, Apr 22, 2020 at 5:50 AM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote: >> Ok. New day tried again >> >> Removed smarty 3 and installed smarty 2 which installed under /usr/local/share/smarty >> >> Using include_path = "/usr/local/share/pear:/usr/local/share/smarty" >> >> Pear is loaded happy but no smarty according to the configtest.pl <http://configtest.pl/> >> >> Can’t get any access to Smarty Mailing list or Forum >> >> Took me a month to get Maia installed originally now its dead after a simple upgrade >> >> >> Jason >> >> >> >> >> >> In general, I find that Smarty3 breaks maia, and I've always had to install Smarty2 to get a 100% working setup. >> >> I've always installed Smarty under /usr/share/php. Do you have a single php.ini for cli and web versions? >> >> Jake >> >> On Tue, Apr 21, 2020 at 2:37 PM Jason Hirsh <[email protected] <mailto:[email protected]>> wrote: >> And SmartI recently upgraded my Server running Freebsd 12.1 1. PHP. 7.2.29 PEAR 1.10.6 and smarty3-php72-3.1.32 >> >> >> My Configuration tester says that all is OK except for smarty. I think I am messing up the php.ini. include_path >> >> >> My current is >> >> include_path = "/usr/local/share/pear:/usr/local/share/smarty3-php72” >> >> >> The Maia config test is happy except for Smarty. Where it says “Failed Not Installed”. The reference page has been no help >> >> >> Any suggestions?? >> >> >> Jason >> _______________________________________________ >> Maia-users mailing list >> [email protected] <mailto:[email protected]> >> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users <http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users> >> >> >> >> >> >> _______________________________________________ >> Maia-users mailing list >> [email protected] <mailto:Maia-users%40renaissoft.com> >> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users <http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users> > _______________________________________________ > Maia-users mailing list > [email protected] <mailto:[email protected]> > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users <http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users> _______________________________________________ Maia-users mailing list [email protected] http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users