RE: Mail stuck in /var/spool/postfix/hold
Remco Barendse <[email protected]>
| Newsgroups | gmane.mail.virus.mailscanner |
|---|---|
| Message-ID | <[email protected]> |
On Tue, 15 Jun 2021, L.P.H. van Belle via MailScanner wrote: > Any error when you run this? > > egrep -i "invalid|error|reject|deny" /var/log/mail.log Nothing! > > Review this again, you never know, maybe you did miss a small thing. > > https://www.mailscanner.info/postfix/ Check! All there > And did you make sure these linese are last in checks_header.pcre > ## We need to put incoming to the HOLD QUEUE for MailScanner > /^Received:/ HOLD Yes, that and the line in main.cf to activate it : header_checks = regexp:/etc/postfix/header_checks > > I havent had the time yet to start on the new mailscanner setup. > I have a kopano install first to finish. :-( > > But tip. Any file you put in here.. /etc/MailScanner/conf.d/ > Like : > Reading configuration file /etc/MailScanner/conf.d/postfix.conf > > Number them. The loading order might conflict. > /etc/MailScanner/conf.d/01-company-base.conf > /etc/MailScanner/conf.d/02-postfix.conf > /etc/MailScanner/conf.d/03-something-else.conf Yes, i already did have! > All rights on folders are checked? I just let the MailScanner installer take care of it : root@gw2:~# ls -lasp /var/spool/MailScanner 32 drwxr-xr-x. 872 mail mtagroup 32768 Jun 13 06:12 archive/ 0 drwxrwx--- 14 root mtagroup 320 Jun 15 20:04 incoming/ 4 drwxrwxr-x 2 postfix mtagroup 4096 Jun 15 11:35 milterin/ 4 drwxrwxr-x 2 postfix mtagroup 4096 Jun 15 11:35 milterout/ 4 drwxrwxr-x 3 postfix postfix 4096 Jun 15 20:04 quarantine/ But everything inside incoming is : 0 drwxrwx--- 2 postfix mtagroup 60 Jun 15 19:54 2174/ I changed it into postfix.postfix as suggested here https://www.mailscanner.info/postfix/ but....... no dice Mail makes into the /var/spool/MailScanner/incoming/2236 but never leaves Thanks!! > > Greetz, > > Louis > >> -----Oorspronkelijk bericht----- >> Van: MailScanner >> [mailto:mailscanner-bounces+belle=bazuin.nl-qhrM8SXbD5JTOyd/[email protected] >> info] Namens Remco Barendse >> Verzonden: dinsdag 15 juni 2021 14:05 >> Aan: MailScanner Discussion >> Onderwerp: Re: Mail stuck in /var/spool/postfix/hold >> >> I checked the log all the way up, no error messages. Just warnings >> >> root@gw2:~# cat /var/log/mail.log | grep -i 6EC7682C7E.A8770 >> Jun 15 13:57:18 gw2 MailScanner[2886]: Making attempt 2 at processing >> message 6EC7682C7E.A8770 >> Jun 15 14:00:22 gw2 MailScanner[3167]: Making attempt 3 at processing >> message 6EC7682C7E.A8770 >> >> MailScanner --lint says all is OK and messages sit in >> /var/spool/postfix/hold until they are quarantined >> >> I did a complete re-install this morning of the server, >> started from fresh >> install of Ubuntu 20.04 and proceeded immediately to install >> MailScanner >> and ran ms-config, did not install any package. >> >> Same result.... Getting a little desperate >> >> root@gw2:~# MailScanner --lint >> Trying to setlogsock(unix) >> >> Reading configuration file /etc/MailScanner/MailScanner.conf >> Reading configuration file /etc/MailScanner/conf.d/README >> Reading configuration file /etc/MailScanner/conf.d/postfix.conf >> Read 1500 hostnames from the phishing whitelist >> Read 5527 hostnames from the phishing blacklists >> >> Checking version numbers... >> Version number in MailScanner.conf (5.3.4) is correct. >> >> Your envelope_sender_header in spamassassin.conf is correct. >> MailScanner setting GID to (121) >> MailScanner setting UID to (118) >> >> Checking for SpamAssassin errors (if you use it)... >> Using SpamAssassin results cache >> Connected to SpamAssassin cache database >> config: registryboundaries: no tlds defined, need to run sa-update >> SpamAssassin reported no errors. >> Auto: Found virus scanners: clamd >> Connected to Processing Attempts Database >> Created Processing Attempts Database successfully >> There are 14 messages in the Processing Attempts Database >> Using locktype = posix >> MailScanner.conf says "Virus Scanners = auto" >> Found these virus scanners installed: clamd >> ============================================================== >> ============= >> Filename Checks: Windows/DOS Executable (1 eicar.com) >> Other Checks: Found 1 problems >> Virus and Content Scanning: Starting >> Clamd::INFECTED:: Win.Test.EICAR_HDB-1 :: ./1/eicar.com >> Virus Scanning: Clamd found 2 infections >> Infected message 1 came from 10.1.1.1 >> Virus Scanning: Found 2 viruses >> ============================================================== >> ============= >> Virus Scanner test reports: >> Clamd said "eicar.com was infected: Win.Test.EICAR_HDB-1" >> >> If any of your virus scanners (clamd) >> are not listed there, you should check that they are >> installed correctly >> and that MailScanner is finding them correctly via its >> virus.scanners.conf. >> >> >> >> >> >> >> On Mon, 14 Jun 2021, Mark Sapiro wrote: >> >>> On 6/14/21 4:41 AM, Remco Barendse wrote: >>>> >>>> No errors, anywhere jusst this in the log : >>>> Jun 14 13:37:27 gw2 MailScanner[3282]: Making attempt 2 >> at processing >>>> message 26A2782CA5.A6FBE >>>> >>>> Jun 14 13:11:43 gw2 MailScanner[3081]: Connected to >> Processing Attempts >>>> Database >>>> Jun 14 13:11:43 gw2 MailScanner[3081]: Found 6 messages >> in the Processing >>>> Attempts Database >>>> Jun 14 13:11:43 gw2 MailScanner[3081]: Using locktype = flock >>>> Jun 14 13:12:25 gw2 MailScanner[2890]: Making attempt 6 >> at processing >>>> message D0D2882370.ACF37 >>>> Jun 14 13:12:25 gw2 MailScanner[2890]: Making attempt 6 >> at processing >>>> message 4C5938221D.A960D >>>> Jun 14 13:12:25 gw2 MailScanner[2890]: New Batch: Found 6 >> messages waiting >>>> Jun 14 13:12:25 gw2 MailScanner[2890]: New Batch: >> Scanning 2 messages, >>>> 883327 bytes >>>> Jun 14 13:12:25 gw2 MailScanner[3006]: Warning: skipping message >>>> D0D2882370.ACF37 as it has been attempted too many times >>>> Jun 14 13:12:25 gw2 MailScanner[3006]: Quarantined message >>>> D0D2882370.ACF37 as it caused MailScanner to crash several times >>>> Jun 14 13:12:25 gw2 MailScanner[3006]: Saved entire message to >>>> /var/spool/MailScanner/quarantine/20210614/D0D2882370.ACF37 >>>> Jun 14 13:12:25 gw2 MailScanner[3081]: Warning: skipping message >>>> 4C5938221D.A960D as it has been attempted too many times >>>> Jun 14 13:12:25 gw2 MailScanner[3081]: Quarantined message >>>> 4C5938221D.A960D as it caused MailScanner to crash several times >>>> Jun 14 13:12:25 gw2 MailScanner[3081]: Saved entire message to >>>> /var/spool/MailScanner/quarantine/20210614/4C5938221D.A960D >>>> Jun 14 13:12:25 gw2 MailScanner[3081]: New Batch: Found 6 >> messages waiting >>> >>> >>> There should be errors logged from the earlier attempts to >> process the >>> messages, perhaps they are in an older, rotated log. >>> >>> >>> -- >>> Mark Sapiro <[email protected]> The highway is for gamblers, >>> San Francisco Bay Area, California better use your sense >> - B. Dylan >>> >>> >>> -- >>> MailScanner mailing list >>> mailscanner-qhrM8SXbD5JTOyd/[email protected] >>> http://lists.mailscanner.info/mailman/listinfo/mailscanner >>> >>> >> >> >> -- >> MailScanner mailing list >> mailscanner-qhrM8SXbD5JTOyd/[email protected] >> http://lists.mailscanner.info/mailman/listinfo/mailscanner >> >> > > > > -- > MailScanner mailing list > mailscanner-qhrM8SXbD5JTOyd/[email protected] > http://lists.mailscanner.info/mailman/listinfo/mailscanner > -- MailScanner mailing list mailscanner-qhrM8SXbD5JTOyd/[email protected] http://lists.mailscanner.info/mailman/listinfo/mailscanner