Re: Bought a new head & cab

mark monillas <[email protected]> Fri, 18 Mar 2011 09:25:53 -0700 (PDT)
Newsgroups gmane.music.equipment.bass
Message-ID <[email protected]>
thats my basic idea bout doing this..... thanks for the backup in my thinki=
ng!=20
hope your project comes out nicely!
Mark

Yo Victa, whatsoever you do, remember this here. You can't hold no groove, =
If you ain't got no pocket !

--- On Fri, 3/18/11, jollyr465 <[email protected]> wrote:


From: jollyr465 <[email protected]>
Subject: Re: [Bass Place] Bought a new head & cab
To: [email protected]
Date: Friday, March 18, 2011, 9:17 AM


=C2=A0=20



My reason of thought has always been. If the instrument has a good straight=
 neck, body & truss-rod. Everything else can be tweaked out, repaired or ch=
anged. My current example is: I was given this old five string OLP for free=
, when I sold my old Ampeg. I'm going to get around to taking it in to my t=
ech. So that he can replace the pick-up with a Norstrand, replace the bridg=
e with something much better, replace the cheap pots, with some new CTS pot=
s, replace the jack with a switchcraft jack, then clean up the frets & fret=
-board, then last of all, replace the broken tuner or just replace all five=
 of the tuners! Then I'll have a really good sounding & solid back up five =
string. That will probably run me about three, maybe four hundred, for all =
the mods. But, it will sound real nice though, when I'm done. I'll let you =
folks know more about this project, once I start it. Which looks like aroun=
d sometime in June.=20

--- In [email protected], mark monillas <alembic4@...> wrote:
>
> the Toby Pro comes with a 34" scale, the electronics i've yet to see, as =
i'm still waiting for the guy to bless him with his greenbacks..... but wha=
t i saw on the picture, they aren't barts... the barts, and the bartolini p=
reamp come in the premium Tobias basses. but i'm still willing to give it a=
 shot.. specially for 400.=C3=82=C2=A0 then i get pickups and a preamp down=
 the road... I've heard the neck isn't quite as wide as the "Real" Tobias b=
asses, soo i attribute that to being a faux slapper... not the best at it. =
but i do slap my Warwick Corvette 6 and my Alembic SBS1, In this economy, I=
 can't afford 1800 for a real Tobias Standard bass.
>=20
> Yo Victa, whatsoever you do, remember this here. You can't hold no groove=
, If you ain't got no pocket !
>=20
> --- On Fri, 3/18/11, jollyr465 <jollyr465@...> wrote:
>=20
>=20
> From: jollyr465 <jollyr465@...>
> Subject: Re: [Bass Place] Bought a new head & cab
> To: [email protected]
> Date: Friday, March 18, 2011, 6:51 AM
>=20
>=20
> =C3=82=C2=A0=20
>=20
>=20
>=20
> Hi Mark, I think the Toby Pro five comes with Barts & a Bart preamp in it=
. The only thing that's different is, I think, I'm not really sure, but I t=
hink it's a 35 scale. It doesn't seem like that much. But, I had a Carvin 3=
5 scale & it would really throw me off, every time that I went to use it. I=
 ended up trading it off for my G&L L2500 which is a 34 scale. I like the B=
 string better also, it's not at all sloppy. Hell, I like my G&L bass so mu=
ch, that it & my Fender jazz bass, are about all I play anymore out of my s=
table.=20
>=20
> --- In [email protected], mark monillas <alembic4@> wrote:
> >
> > hey gang.. i'm considering a Toby Pro 5 string, whats the groups though=
ts?=C3=83=E2=80=9A=C3=82=C2=A0 If i get it .. at some point down the road, =
i'll put nice bartolini's and a preamp in it.?
> >=20
> >=20
> > Yo Victa, whatsoever you do, remember this here. You can't hold no groo=
ve, If you ain't got no pocket !
> >=20
> > --- On Thu, 3/17/11, Barbara Marconi <killerb1219@> wrote:
> >=20
> >=20
> > From: Barbara Marconi <killerb1219@>
> > Subject: Re: [Bass Place] Bought a new head & cab
> > To: [email protected]
> > Date: Thursday, March 17, 2011, 1:56 PM
> >=20
> >=20
> > =C3=83=E2=80=9A=C3=82=C2=A0=20
> >=20
> >=20
> >=20
> > now get a bigger rig and bury your guitar player
> >=20
> > ________________________________
> > From: jollyr465 <jollyr465@>
> > To: [email protected]
> > Sent: Thu, March 17, 2011 11:00:45 AM
> > Subject: Re: [Bass Place] Bought a new head & cab
> >=20
> > =C3=83=E2=80=9A=C3=82=C2=A0=20
> > I got rid of the GK 115 Neo II & replaced it with another GK MBE Ultra =
Light 210=20
> > cab at 400 watts. Both of the GK MBE 210 cabs with the SWR Headlite hea=
d, sound=20
> > really good together. With lots of definition to your tone. Although th=
e EQ on=20
> > the SWR head is very sensitive, but once you get it dialed in. The SWR =
head with=20
> > the two GK cabs, sound really good together. IMO. Note: I saw one bad r=
eview on=20
> > another bass site, about this head. But I've had none of the problems t=
hat this=20
> > guy is having with his head. But if you read his review, you'll see his=
 problem=20
> > right off & it's not the amp! Again IMO
> > --- In [email protected], "jollyr465" <jollyr465@> wrote:
> > >
> > > Thanks you.
> > >=20
> > > --- In [email protected], mark monillas <alembic4@> wrote:
> > > >
> > > > Gratz.. nice rig!
> > > >=20
> > > > Yo Victa, whatsoever you do, remember this here. You can't hold no =
groove, If=20
> > >you ain't got no pocket !
> > > >=20
> > > > --- On Thu, 2/3/11, jollyr465 <jollyr465@> wrote:
> > > >=20
> > > > From: jollyr465 <jollyr465@>
> > > > Subject: [Bass Place] Bought a new head & cab
> > > > To: [email protected]
> > > > Date: Thursday, February 3, 2011, 8:17 AM
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > > =C3=83=C6=92=C3=A2=E2=82=AC=C5=A1=C3=83=E2=80=9A=C3=82=C2=A0
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > > I sold my customized Ampeg B200R & bought that new SWR Headlite 400=
 watt=20
> > >digital hybrid head, that weights 3 pounds. I also bought a GK ultrali=
ght 210=20
> > >cab that weights 32 pounds & a GK Neo II 115 cab that weights about 35=
 pounds.=20
> > >They sound really good together, with lots of power & a great tone. Th=
e next=20
> > >thing that I want to buy is SWR Amplite power amp, that weights in at =
about 2=20
> > >pounds & bumps up the watts to 800 watts. I'm getting old, with a bad =
back & I=20
> > >just can't lug that heavy combo around anymore.=20
> > >
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > >=20
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> >=20
> > [Non-text portions of this message have been removed]
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> > [Non-text portions of this message have been removed]
> >
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> [Non-text portions of this message have been removed]
>









=20=20=20=20=20=20

[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/bassplace/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/bassplace/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected]=20
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/