Re: Re: receiving sysex data ?

they must fit exactly

The biggest problem is the pinout(If I remember corretly, about any 
opamp can replace a TL0xx). I saw a couple of 14pin opamps but some were 
2 chans, some not the same . . .
If no other opamps can fit, filtering the 6v input(Noise is heard only 
when the K5 booted up and the PSU's 6v is always on when you turn on the 
switch) of each opamps might fix the problem.(But the traces bring the 
current directly to the chips, without any components between, which 
makes it difficult to filter.)

[email protected] a écrit:

> Hi Antoine
>
> i am sorry to hear that.
>
> There are some quad opamps, but the problem is that they must fit
> exactly and the risk to burst the K5 by trying out the wrong thing
> prevents me from doing experiments with unknown consequences.
>
> Greetings Klaus
>
> > To Klaus:
> >
> > P.S. No, I've not received any other thing then "Good 4 chan opamps are
> > hard to find" and "I'm not familiar with these circuits" from the guy I
> > found who could help us removing the K5's noise.
> >
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> <http://us.ard.yahoo.com/SIG=12931tnlb/M=273541.4247512.5496808.2248467/D=grplch/S=1705032144:HM/EXP=1089189956/A=2061551/R=0/SIG=11sr5b9n1/*http://launch.yahoo.com/artist/videos.asp?artistID=1001301> 
>
>
>
> ------------------------------------------------------------------------
> Yahoo! Groups Links
>
>     * To visit your group on the web, go to:
>       http://groups.yahoo.com/group/k5synth/
>        
>     * To unsubscribe from this group, send an email to:
>       [email protected]
>       <mailto:[email protected]?subject=Unsubscribe>
>        
>     * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>

-- 
Thanks,
Antoine Deschênes /aka
  -´¯`-¸-DragonMaster-¸-´¯`-
http://thehotcom.deep-ice.com/