Re: Intermittent backlight

Oops, I found that moving the wires while the K5 is on makes the 
inverter moving. Guess what : Dry joints INSIDE the inverter is the problem.
Now I just need to find a way to remove the casing . . .

[email protected] a écrit:

> Someone told he got an intermittent backlight. I thought my inverter was
> dead but Iin fact I go tthe same problem and guess what? I found the
> cause! It's the connection from inverter to LCD backlight/backlights in
> my case(including male and female socket connections). All you have to
> do is to get some 22AWG 103ºC wire(3' to be sure), a 3-pin male socket
> like the one in there, a 3-pin female socket and 4pins to go in it(It's
> not hard to miss you shot with these pins)
> -- 
> Antoine Deschênes /aka
>   -´¯`-¸-DragonMaster-¸-´¯`-
> http://thehotcom.deep-ice.com/


-- 
Antoine Deschênes /aka
  -´¯`-¸-DragonMaster-¸-´¯`-
http://thehotcom.deep-ice.com/



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Create your own customized LAUNCHcast Internet Radio station. 
Rate your favorite Artists, Albums, and Songs. Skip songs. Click here!
http://us.click.yahoo.com/5ddjqC/xA5HAA/n1hLAA/QnLolB/TM
--------------------------------------------------------------------~->