Re: [SPAM] Re: [SPAM] Re: [SPAM] Re: Lost....

Hi Scott,

Wow! A driver reinstall. It's so simple, but I would have tried about 
anything else before thinking about this.

Yep, there are great sounds out there. The Kawai card banks are not that 
interesting, but user-made ones are.

Antoine

Scott a écrit :
> Thanks, when I said it only has one way of going into the computer I 
> was referring to the end that goes into the computer..the usb end. The 
> other end has the midi in and out and I plugged them accordingly. I 
> reinstalled the midi drives for the usb device and it worked!! There 
> are some great sounds out there and whoever did them has my gratitutde 
> as thsoe who talked me through this mess today. thanks,Scott
>
>     ----- Original Message -----
>     *From:* Jeff B <mailto:jeffbee42-/[email protected]>
>     *To:* [email protected] <mailto:[email protected]>
>     *Sent:* Saturday, June 02, 2007 10:05 PM
>     *Subject:* [SPAM] Re: [SPAM] Re: [SPAM] Re: [k5synth] Lost....
>
>     Your USB MIDI interface should have at least one MIDI In and one
>     MIDI Out.  Just pair them up with your K5.  Also, when trouble
>     shooting these things (I'm stating the obvious now), make sure
>     that the devices are connected directly w/each other (so no MID
>     patchbays, etc...)
>      
>      
>     Jeff
>
>     ----- Original Message ----
>     From: Scott <[email protected] <mailto:[email protected]>>
>     To: [email protected]
>     Sent: Saturday, June 2, 2007 4:03:17 PM
>     Subject: Re: [SPAM] Re: [SPAM] Re: [k5synth] Lost....
>
>     Thanks, I appreciate the suggestion. My midi cable is a usb type
>     so it only has one way of going into the computer, I hope that's
>     not the problem because that cable works so well with everything else.
>     Scott
>
>         ----- Original Message -----
>         *From:* Jeff B <mailto:jeffbee42-/[email protected]>
>         *To:* k5synth@yahoogroups .com <mailto:[email protected]>
>         *Sent:* Saturday, June 02, 2007 5:08 PM
>         *Subject:* [SPAM] Re: [SPAM] Re: [k5synth] Lost....
>
>         Make sure that both the MIDI Out of the K5 is going into your
>         computer's MIDI In __AND__ the MIDI Out of the computer is
>         going into the MIDI In of the K5.  Whith some synths, all you
>         need to do is hook the MIDI Out of the syth into the MIDI In
>         of the computer.  The K5 is not like this.  The SysEx transfer
>         requires a two-way communication so both the MIDI in and MIDI
>         Out need to be correctly connected.
>          
>         I don't know if that's what's going wrong but I thought I'd
>         mention it.
>          
>         Jeff
>
>         ----- Original Message ----
>         From: Scott <bjork01@cableone. net>
>         To: k5synth@yahoogroups .com
>         Sent: Saturday, June 2, 2007 1:58:02 PM
>         Subject: Re: [SPAM] Re: [k5synth] Lost....
>
>         Thanks for the quick reply. I've done all of those things and
>         rechecked my midi connector's settings on the computer to make
>         usre they are correct. I have no problems doing sys ex dumps
>         with my other synths but this one puzzles me. It's not
>         consistently sending dumps out of the K-5 via sys ex either.
>         I've tried using the Kfleuf program and have also had no luck
>         with it, it's probably something stupid on my part that I'm
>         just not catching but I've worked with this all day and still
>         no luck.
>         Thanks,Scott
>
>             ----- Original Message -----
>             *From:* Antoine Deschênes <mailto:antdes45-FFYn/[email protected]>
>             *To:* k5synth@yahoogroups .com
>             <mailto:[email protected]>
>             *Sent:* Saturday, June 02, 2007 3:32 PM
>             *Subject:* [SPAM] Re: [k5synth] Lost..
>
>             In the MIDI menu on the K5, make sure that RCV and TRS
>             channels are set
>             to 1, that OMNI is off, that TRS and RCV Exclusive are on,
>             and that you
>             turned off the protect switch next to the MIDI connectors.
>             Also, make
>             sure you turn protect ON when you don't transfer or edit
>             sounds as you
>             might have to internally reset it. (I haven't tested the
>             latest ROM
>             enough to know if it changes something. But, as far as I
>             know, nothing
>             bad happened with the new ROM.)
>
>             bjork011963 a écrit :
>             > I got my K-5 yesterday and was trying to load some
>             programs into it
>             > using a couple of sys ex utilities that I have including
>             the one
>             > offered on here in the files section. I use a usb midi
>             connector to go
>             > from my computer to the K-5 as I do with my other synths
>             but cannot get
>             > the K-5 to accept any programs. I connected the K-5 to
>             one of my other
>             > synts to make sure that the midi in was working and it
>             is, the system
>             > exclusive part is also turned on on the program. Any
>             ideas as to what
>             > I'm doing wrong? Thanks,Scott
>             >
>