[SPAM] Re: [SPAM] Re: [SPAM] Re: [SPAM] Re: Lost....

Hi, Scott, that thing works at least! good fou you, man; I was sure 
that the only way that you'd get it should be using a jostick-midi 
or a pci-midi interface, really, but great I was wrong.

About de organ sound, you can start for this: in the DHG page take 
de OCT overtones and rise them all and ... you have an aproximation 
to an organ sound!, now it's time to "experiment" with parameters 
you want, envelopes, other harmonics, tone variations, etc. Do it 
man, and you'll have great organ snds ... of your own ;). Obvously, 
after that, you can go to Multi Section and mix the sound/s and have 
a greater sound (with less poliphony, but POWER!!)

Best regards.


--- In [email protected], "Scott" <bjork01@...> wrote:
>
> Thanks for your help it is greatly appreciated. My mother used to 
always tell me that people seem to always look for the most 
difficult solutions before they finally give up and go with the one 
that's the easiest and most obvious. I had given up yesterday 
thinking that it just wasn't going to happen because I had done 
everything I knew to do and I've been doing this a long time then it 
struck me that the little light on my midi interface only showed 
incoming but no outgoing and that's what made me reinstall the 
drivers. Today it'll probably never work again but at least I have 
these terrific banks with great sounds that I can use. Next, the 
backlight problem. I can see the display but it just bugs me to have 
to squint and knowing that it doesn't work. Telesis, get ready!!!
> Thanks,Scott
> p.s.- there's this great pipe organ sound one one of the sites and 
I can't find it amongst my sounds, if you use a pipe organ sound ( 
for progressive rock it's real important) do you have a favorite?
> p.s.s.- I read something about the availability of ram cards but 
lost the message, are there some available somewhere?
>   ----- Original Message ----- 
>   From: Antoine Deschênes 
>   To: [email protected] 
>   Sent: Sunday, June 03, 2007 9:34 AM
>   Subject: [SPAM] Re: [SPAM] Re: [SPAM] Re: [SPAM] Re: [k5synth] 
Lost....
> 
> 
>   Hi Scott,
> 
>   Wow! A driver reinstall. It's so simple, but I would have tried 
about 
>   anything else before thinking about this.
> 
>   Yep, there are great sounds out there. The Kawai card banks are 
not that 
>   interesting, but user-made ones are.
> 
>   Antoine
> 
>   Scott a écrit :
>   > Thanks, when I said it only has one way of going into the 
computer I 
>   > was referring to the end that goes into the computer..the usb 
end. The 
>   > other end has the midi in and out and I plugged them 
accordingly. I 
>   > reinstalled the midi drives for the usb device and it worked!! 
There 
>   > are some great sounds out there and whoever did them has my 
gratitutde 
>   > as thsoe who talked me through this mess today. thanks,Scott
>   >
>   > ----- Original Message -----
>   > *From:* Jeff B <mailto:jeffbee42@...>
>   > *To:* [email protected] <mailto:[email protected]>
>   > *Sent:* Saturday, June 02, 2007 10:05 PM
>   > *Subject:* [SPAM] Re: [SPAM] Re: [SPAM] Re: [k5synth] Lost....
>   >
>   > Your USB MIDI interface should have at least one MIDI In and 
one
>   > MIDI Out. Just pair them up with your K5. Also, when trouble
>   > shooting these things (I'm stating the obvious now), make sure
>   > that the devices are connected directly w/each other (so no MID
>   > patchbays, etc...)
>   > 
>   > 
>   > Jeff
>   >
>   > ----- Original Message ----
>   > From: Scott <bjork01@... <mailto:bjork01@...>>
>   > To: [email protected]
>   > Sent: Saturday, June 2, 2007 4:03:17 PM
>   > Subject: Re: [SPAM] Re: [SPAM] Re: [k5synth] Lost....
>   >
>   > Thanks, I appreciate the suggestion. My midi cable is a usb 
type
>   > so it only has one way of going into the computer, I hope 
that's
>   > not the problem because that cable works so well with 
everything else.
>   > Scott
>   >
>   > ----- Original Message -----
>   > *From:* Jeff B <mailto:jeffbee42@...>
>   > *To:* k5synth@yahoogroups .com <mailto:[email protected]>
>   > *Sent:* Saturday, June 02, 2007 5:08 PM
>   > *Subject:* [SPAM] Re: [SPAM] Re: [k5synth] Lost....
>   >
>   > Make sure that both the MIDI Out of the K5 is going into your
>   > computer's MIDI In __AND__ the MIDI Out of the computer is
>   > going into the MIDI In of the K5. Whith some synths, all you
>   > need to do is hook the MIDI Out of the syth into the MIDI In
>   > of the computer. The K5 is not like this. The SysEx transfer
>   > requires a two-way communication so both the MIDI in and MIDI
>   > Out need to be correctly connected.
>   > 
>   > I don't know if that's what's going wrong but I thought I'd
>   > mention it.
>   > 
>   > Jeff
>   >
>   > ----- Original Message ----
>   > From: Scott <bjork01@cableone. net>
>   > To: k5synth@yahoogroups .com
>   > Sent: Saturday, June 2, 2007 1:58:02 PM
>   > Subject: Re: [SPAM] Re: [k5synth] Lost....
>   >
>   > Thanks for the quick reply. I've done all of those things and
>   > rechecked my midi connector's settings on the computer to make
>   > usre they are correct. I have no problems doing sys ex dumps
>   > with my other synths but this one puzzles me. It's not
>   > consistently sending dumps out of the K-5 via sys ex either.
>   > I've tried using the Kfleuf program and have also had no luck
>   > with it, it's probably something stupid on my part that I'm
>   > just not catching but I've worked with this all day and still
>   > no luck.
>   > Thanks,Scott
>   >
>   > ----- Original Message -----
>   > *From:* Antoine Deschênes <mailto:antdes45@...>
>   > *To:* k5synth@yahoogroups .com
>   > <mailto:[email protected]>
>   > *Sent:* Saturday, June 02, 2007 3:32 PM
>   > *Subject:* [SPAM] Re: [k5synth] Lost..
>   >
>   > In the MIDI menu on the K5, make sure that RCV and TRS
>   > channels are set
>   > to 1, that OMNI is off, that TRS and RCV Exclusive are on,
>   > and that you
>   > turned off the protect switch next to the MIDI connectors.
>   > Also, make
>   > sure you turn protect ON when you don't transfer or edit
>   > sounds as you
>   > might have to internally reset it. (I haven't tested the
>   > latest ROM
>   > enough to know if it changes something. But, as far as I
>   > know, nothing
>   > bad happened with the new ROM.)
>   >
>   > bjork011963 a écrit :
>   > > I got my K-5 yesterday and was trying to load some
>   > programs into it
>   > > using a couple of sys ex utilities that I have including
>   > the one
>   > > offered on here in the files section. I use a usb midi
>   > connector to go
>   > > from my computer to the K-5 as I do with my other synths
>   > but cannot get
>   > > the K-5 to accept any programs. I connected the K-5 to
>   > one of my other
>   > > synts to make sure that the midi in was working and it
>   > is, the system
>   > > exclusive part is also turned on on the program. Any
>   > ideas as to what
>   > > I'm doing wrong? Thanks,Scott
>   > >
>   >
> 
> 
>    
> 
> 
> -------------------------------------------------------------------
-----------
> 
> 
>   No virus found in this incoming message.
>   Checked by AVG Free Edition. 
>   Version: 7.5.472 / Virus Database: 269.8.7/829 - Release Date: 
6/2/2007 5:26 PM
>