Re: Re: receiving sysex data ?
"Cindy and Nathan Thane" <[email protected]>
| Newsgroups | gmane.music.equipment.kawai.k5 |
|---|---|
| Message-ID | <[email protected]> |
Phono, The guys at this site helping you are great and have given you all the advice I know about. Also the K5 technical support from Kawai America is great. I left and e-mail and phone call and got a response on the same day. The technical support guy actually called me!! Check their web site to get the phone number. I also own a K5000s and K5. I work so much that I get little time to do programming, so I have just loaded my favorite patches on the K5 internal and card. I really love both units. Good luck Nathan ----- Original Message ----- From: phonophobie To: [email protected] Sent: Monday, July 05, 2004 6:32 AM Subject: [k5synth] Re: receiving sysex data ? Hi klaus, i decided to continue to talk about the problems here, since others may have the same problems. so this could be a good info for everyone.... to answer your questions: 1. i have rom version 1.0 2. trs/rcv is on 3. yes i can play with any midinote 4. in midiox programmchange messages are displayed. for example when i change from singlepatch 1 to 2 a sysexmessage shows up in midiox. but there is a odd thing about the patchnames displayed in midiox: the name of patch 1 on k5 is "onlybass" but the name of the same patch in midiox is called "acc. grand piano" - so every k5patch has a different name in midiox sysex display. 5. i can´t send any sysex data to my pc. the datatransfer stops always at 993 bytes, and my k5m crashes It´s very strange.. the only succes i have made is to transfer sysex banks to my k5m. BUT this only worked one time or two times. When i wanted to do send another bank then, the K5m doesn´t received any single sounds. the internal patches were the same as before... I had to reboot my PC(?!) Note: in Midiox you have to enter a higher "delayvalue" for the transfer rate! I will check if there is any delayrate for RECEIVING sysexdata, in MidiOX setups.. since it crashes always at 993 bytes. thanx phono =============================== Ich habe irgendwie immense Problem irgendwelche Daten per sysex in meinen K5m zu laden. Das kenne ich gut! Trotzdem ich mitbekommen habe, dass du auch einen K5K hast, erst einmal ein paar Fragen: 1. welche ROM Version zeigt das K5 beim Starten an? 2. ist auf der MIDI Seite TRS=1 und RCV=1 und dann noch TRS=ON und RCV=ON 3. wenn du ein Midi Keyboard oder ein Programm anschliesst dann kannst du etwas spielen? 4. Wenn du ein Midi Sequencer/ Sysex Display Programm auf deinem Computer aufrufst, werden dann die Programm Change Messages beim Umschalten zwischen Multi oder Single Programmen angezeigt, bzw. wenn du einen Dump machst vom K5 auf den Computer fuer nur ein Patch, gehen Daten auf dem Computer ein? Ich hatte auch schonmal, nur mit meinem K5m das Problem, dass es nicht mit allen Midi Eingaengen funktionierte. Ich kann also mein K5m an eine Midi Schnittstelle haengen und es passiert kein Output obwohl auf derselben Schnittstelle mein K5 einwandfrei arbeitet. Fuer das K5m habe ich mir jetzt ein Midiman2x2 gekauft und seitdem habe ich keine Probleme mehr. Yahoo! Groups Sponsor ADVERTISEMENT ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: http://groups.yahoo.com/group/k5synth/ b.. To unsubscribe from this group, send an email to: [email protected] c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.