Re: Mr Kay please help! My KARMA is getting out of control

Hello!
I've got the SAME PROBLEM!
Any idea how to solve it?
Thanx
this is a big problem for me

Francesco
(Italy)



--- In [email protected], "searching_g" <guenter-
schwaiger@d...> wrote:
> Hallo Mr Kay,
> 
> please give me a hint to following. My KARMA (SNr.004622) 
operating 
> at OS2.0 is getting worse - even when playing it standalone:
> STATE NOW:
> Nearly all programms do a transpose of two halftones higher when 
> playing some seconds on them without activating the aftertouch 
> (playing softly). They transpose immediately when a keypress 
causes 
> aftertouch. The transposing is NOT shown in the global section 
(Key 
> Transpose keeps at +00). Switching from the higher sounding 
program 
> to the combi mode makes the sound step down to original pitch. 
> Switching back to program lets me hear the original pitch for a 
short 
> moment then it goes high again by two halftones.
> Many combinations sound very confusing, e.g. the bass line of 
CA032 
> (Hip Trip Split) is two halftones lower than the piano line - when 
> playing a "D" on the piano the corresponding key of the bass has 
to 
> be "C".
> On CE025 (Gig Split) the bass an piano lines are sync in transpose 
> but the mapping of the drums has changed and the rhythm is out of 
> sync. Its impossible to play the instrument any more. Playing the 
> demo songs on the sequencer seems to be o.k.
> WHAT I DIT TO CORRECT THAT:
> All this happens AFTER I tried to do a factory reset I performed 
with 
> reloading the 3 OS disks, then the 2 GE disks and finally the PCG 
> disk for the OS2.0
> QUESTION:
> How can I perform a "true" factory reset to get the instrument to 
> real factory level again (because i tried many changes all over 
the 
> system and now want to start from zero)?
> LAST NOTE:
> In CA000 (Voice Of Karma) I was able to get rid of the transpose 
> effect by editing COMBI 3.1:Ed-Parm1 Pitch Bend, where I saw not 
only 
> +00 and +12 but also some values of +02 which I moved to +00. 
While 
> experiencing the instrument I stored some modified factory sounds 
on 
> bank C (they were not deleted when resetting the unit) and I 
> programmed the footswitch to take over the joystck switch for 
rotary 
> of organ sounds. It worked fine but as far as I remember this was 
the 
> beginning of the transpose problem (at the outset it happened very 
> rare when playing the great PA007 (BX3 Velo Switch) - I then 
turned 
> off the unit and switched it on again.
> 
> Thank you in advance
> 
> greetings from germany
> guenter




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Life without art & music? Keep the arts alive today at Network for Good!
http://us.click.yahoo.com/iuUuID/dnQLAA/n1hLAA/QnLolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/korgkarma/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/