Re: Creating Timbre Groups

           Thanks, Eric. Being new to the Karma, I sometimes feel
overwhelmed by the amount of parameters and settings. Trying to find
information like this in the manual is a chore at best. I almost gave
up and was getting ready to sell. But, after calming down a bit, I
realized that it is going to take some time to get comfortable with
this instrument, and the work it requires will eventually pay off. I
appreciate your help very much.
	I was a bit puzzled by Stephens response, when he gave his example of
copying the programs to Bank "E", but then realized I had asked about
moving a program from Bank "D". I have come away, at least with the
knowledge that Banks A,B, & E are the default locations for the Karma,
and I have the PCM-EXB05 loaded in Bank "C" . So, I imagine Bank "D"
would be my obvious choice, and I thought I read that I can use bank
"F" if I am not using the MOSS option at this time.
	Again, many thanks for your help. I really appreciate it.

	Vin



--- In [email protected], "Eric J. Sawyer"
<doubleejprojects@y...> wrote:
>
> Hi vin,
>    As I replied in KLF:
> "If you don't have any EXBs installed, I would "write" your desired 
> programs to Bank C or D. That way you won't overwrite you Bank E 
> programs which are required for many combis including factory and 3rd 
> party."
> 
> So, just save each program to Bank C (or D) in this order:
> C000, C001, C002, C003. You will have to click the Bank button 
> regardless.  But once there you can use the inc/dec button or numeric 
> keypad to go to your selected programs. If you have a footswitch set 
> up for it, you can tap in the next program.
> 
> Cheers, 
> Eric
> 
> 
> --- In [email protected], "vin52ny" <vin52ny@g...> wrote:
> >
> > 
> > Ok folks, here is a question for the forum, I've also listed this 
> post
> > on the Karma Labs site. Say, I wanted to take 4 timbres – A001, 
> B023,
> > C012, & D017 and store them somewhere so I can call them up in a 
> live
> > situation without having to click on Program Bank and number or use
> > the Value knob. Is this possible? The timbre's I gave above are
> > inconsequential, I just picked them at random for the purpose of
> > asking the question.
> >
>






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/korgkarma/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/