Re: Re: ISSUE after Adding ROM-1 Orchestral ROM-2 Contemporary to K2000R

Thanks for the suggestions, everyone!

I had already tried the hard reset without any luck and the diagnostics did
not turn up any errors.

What finally worked was some advice I found in an earlier Kurzweil thread
about waiting at least 30 minutes after removing the RAM batteries. I had
changed them, but did not wait before putting new ones in. I guess that
extra time is needed to fully clear the RAM and reset DSP.

It’s all working great now!  :)


Kevin

On Thu, Mar 7, 2019 at 10:47 PM Steve Daniels [email protected]
[KurzList] <[email protected]> wrote:

>
>
> You might want to reset the K2000 to the factory defaults first. Follow
> the steps Roger gave you, but choose "Hard Reset" instead of "Diagnostics".
> If the reset doesn't fix the problem, the diagnostics might give you an
> idea of what's wrong.
>
> More info on how to reset here: How can I restore my K2000 to its factory
> defaults? (Hard Reset) | Kurzweil
> <http://kurzweil.com/knowledgebase/k2000/troubleshooting/193/>
>
> How can I restore my K2000 to its factory defaults? (Hard Reset) | Kurzweil
>
> How can I restore my K2000 to its factory defaults?
> <http://kurzweil.com/knowledgebase/k2000/troubleshooting/193/>
>
> Steve
>
> On Thursday, March 7, 2019, 4:57:30 PM EST, Roger J
> [email protected] [KurzList] <[email protected]> wrote:
>
>
>
>
> Run sound Rom diagnostic by holding 1, 2, 3 down on power on, then scroll
> to test.
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Thu, Mar 7, 2019 at 6:41 AM, [email protected] [KurzList]
> <[email protected]> wrote:
>
>
> Maybe the RAM backup batteries need replacement?
>
> 
>