Re: Power Adaptor for PC-88
| Newsgroups | gmane.music.equipment.kurzweil |
|---|---|
| Message-ID | <20190311195621.GA26524@ilyushin> |
On Sun, Mar 10, 2019 at 01:22:43AM +0000, [email protected] [KurzList] wrote: > Group: > I have played my PC-88 for around 12 years now and finally burned out my > power adaptor ( Class 2 AC Adaptor Model: PP95-20 > Output: AC 9.5V 2.0A) > I recently ordered an adaptor billed as working with the PC-88 but the adaptor is 9V and the one > made for the 88 is actually a 9.5V. > To get to the point: Does anyone know where I can find the correct replacement? i.e., the adaptor named above If you measure it you'll probably find it's really putting out somewhere between 10 and 11V anyway. It'll be fine as long as the voltage is "about right" and it can supply at least as much current and ideally more than the original - never less current! -- Gordonjcp ------------------------------------ Posted by: Gordonjcp <[email protected]> ------------------------------------ To QUIT KurzList, send a *blank* message to [email protected] It will take from 24 to 48 hours for Yahoo!Groups to cancel you. ------------------------------------ Yahoo Groups Links