| Newsgroups |
gmane.music.equipment.kurzweil |
| Message-ID |
<[email protected]> |
--------------D61BEC1949DE297E127AC837
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
FYI so people are not out on a snipe hunt V3.87 was that last software
release for the K2000 / K2VX
On 2/24/2020 1:42 PM, Roger J [email protected] [KurzList] wrote:
>
> https://kurzweil.com/k2000/#faqs
>
>
> V3.54 of v3.89
> I would only use V3.89, It loads faster and has support for later also
> device.
> There are two different OSs, one for early early version with Calvin
> and another version for most common later versions. for Janis
> models. Look at your current eproms, it will have a J after the
> version number, ie, v3.89 J. Very early may not have C for Calvin.
>
> You can use a scsi 2 drive with a 3 Dollar adapter.
>
> If the hard drive you select draws more than an amp, it may not spin
> up, the fix is to replace the digital 12 volt regulator(7812) with a
> 78T12 that can handle 1.5 amps. There are two 7812, one is for ànalog
> and the other for digital voltages.
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Sun, Feb 23, 2020 at 8:24 PM, Garth Hjelte [email protected]
> [KurzList]
> <[email protected]> wrote:
>
> At 09:05 PM 2/23/2020, you wrote:
>
>> The partitioning they are talking about is the SCSI2SD V5.1 is
>> able to set up as 4 SCSI IDs and it is able to partition an 8GB
>> SD card in to 4 2GB drives.
>> The K2000 would then see it as 4 separate drives.
>
> That's not what _I_ am talking about at all.
>
> I'm talking about the partitioning THE KURZWEIL is able to do.
> (SCSI2SD, we do not use the term "partition", we use the term "ID"
> or "SCSI ID".)
>
> (And, my company sells many SCSI2SD boards and for the K2500 we
> set it up with a 32GB SD card, ID it 4 different ways, and put 4
> partitions on each ID, thus taking advantage of the entire 32GB
> card with 16 partitions. - And extra note to be precise; the last
> ID actually gets 3 partitions, since a 32GB SD card is never 32GB
> but more like 31.4GB.)
>
> "THE KURZWEIL" meaning the K2500 for sure (I have one), but my
> question is whether the K2000 is able to do this, and if so, what
> is the minimum OS that can do it.
>
> BTW, the "partitioning" is computer-compatible partitioning; that
> is, if you hook the drive/card into a computer - Mac or Windows -
> all the partitions will show up, mounted on the computer.
>
> Again, the K2500 does this - does the K2000?
>
> (I know Gordon answered this but I'm asking for a further
> confirmation. See other post.)
>
>> On Sun, Feb 23, 2020 at 02:46:08PM -0600, 'Chicken Systems, Inc.'
>> [email protected] <mailto:[email protected]> [KurzList] wrote:
>>> > At 01:51 PM 2/23/2020, you wrote:
>>> >
>>> > >> What OS supports partitioning a larger SCSI drive to
>>> separate 2GB partitions?
>>> > >> This is the K2000, not the K25000 or higher.
>>> >
>>> > >I don't think any of them do. I guess if you were using a
>>> SCSI2SD-type device and tweaked the software you could make a
>>> card larger than 2GB appear as multiple 2GB units.
>>> >
>>> > The K2500 supports partitioning - that is, if you have a 8GB
>>> disk it understands that and asks you if you want to split it
>>> into 4 partitions. I was almost 100% positive that the K2000 did
>>> this, of course in later operating systems.
>>> >
>>> > The question is - if so, what min Kurzweil OS?
>>> >
>>>
>>> I'm running the very latest, 3.87J (Janis chipset). It
>>> definitely does not support partitioning.
>
>
> Garth Hjelte
> Sampler User
>
>
--------------D61BEC1949DE297E127AC837
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: 8bit
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
</head>
<body style="background-color: #fff;">
<span style="display:none"> </span>
<!--~-|**|PrettyHtmlStartT|**|-~-->
<div id="ygrp-mlmsg" style="position:relative;">
<div id="ygrp-msg" style="z-index: 1;">
<!--~-|**|PrettyHtmlEndT|**|-~-->
<div id="ygrp-text" >
<p>
FYI so people are not out on a snipe hunt V3.87 was that last
software release for the K2000 / K2VX<br>
<br>
<div class="moz-cite-prefix">On 2/24/2020 1:42 PM, Roger J
<a class="moz-txt-link-abbreviated" href="mailto:[email protected]">[email protected]</a> [KurzList] wrote:<br>
</div>
<blockquote type="cite" cite="mid:[email protected]">
<span> </span>
<div id="ygrp-text">
<p><a id="linkextractor__1582579547251" data="true" href="https://kurzweil.com/k2000/#faqs" moz="true">https://kurzweil.com/k2000/#faqs</a></p>
<div id="yMail_cursorElementTracker_1582579547308"><br>
</div>
<div id="yMail_cursorElementTracker_1582579547961">V3.54 of
v3.89</div>
<div id="yMail_cursorElementTracker_1582579584879">I would
only use V3.89, It loads faster and has support for later
also device.</div>
<div id="yMail_cursorElementTracker_1582579680898">There are
two different OSs, one for early early version with Calvin
and another version for most common later versions. for
Janis models. Look at your current eproms, it will have a
J after the version number, ie, v3.89 J. Very early may
not have C for Calvin.</div>
<div id="yMail_cursorElementTracker_1582580010668"><br>
</div>
<div id="yMail_cursorElementTracker_1582580010825">You can
use a scsi 2 drive with a 3 Dollar adapter. </div>
<div id="yMail_cursorElementTracker_1582580094556"><br>
</div>
<div id="yMail_cursorElementTracker_1582580094924">If the
hard drive you select draws more than an amp, it may not
spin up, the fix is to replace the digital 12 volt
regulator(7812) with a 78T12 that can handle 1.5 amps.
There are two 7812, one is for ànalog and the other for
digital voltages. </div>
<div id="yMail_cursorElementTracker_1582579585124"><br>
<div id="ymail_android_signature"><a id="ymail_android_signature_link" href="https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature" moz="true">Sent from Yahoo Mail on Android</a></div>
<br>
<blockquote style="margin: 0 0 20px 0;">
<div style="font-family:Roboto,
sans-serif;color:#6D00F6;">
<div>On Sun, Feb 23, 2020 at 8:24 PM, Garth Hjelte
<a class="moz-txt-link-abbreviated" href="mailto:[email protected]">[email protected]</a> [KurzList]</div>
<div><a class="moz-txt-link-rfc2396E" href="mailto:[email protected]"><[email protected]></a> wrote:</div>
</div>
<div style="padding: 10px 0 0 20px;margin: 10px 0 0
0;border-left: 1px solid #6D00F6;">
<div id="yiv6115842520">
<div>
<span> </span>
<div id="yiv6115842520ygrp-mlmsg">
<div id="yiv6115842520ygrp-msg">
<div id="yiv6115842520ygrp-text">
<p>
At 09:05 PM 2/23/2020, you wrote:<br clear="none">
<br clear="none">
</p>
<blockquote class="yiv6115842520cite" type="cite">The partitioning they are
talking about is the SCSI2SD V5.1 is able
to set up as 4 SCSI IDs and it
is able to partition an 8GB SD card in to
4 2GB drives.<br clear="none">
The K2000 would then see it as 4 separate
drives.</blockquote>
<br clear="none">
That's not what _I_ am talking about at all.<br clear="none">
<br clear="none">
I'm talking about the partitioning THE
KURZWEIL is able to do. (SCSI2SD,
we do not use the term "partition", we use
the term
"ID" or "SCSI ID".)<br clear="none">
<br clear="none">
(And, my company sells many SCSI2SD boards
and for the K2500 we set it up
with a 32GB SD card, ID it 4 different ways,
and put 4 partitions on each
ID, thus taking advantage of the entire 32GB
card with 16 partitions. -
And extra note to be precise; the last ID
actually gets 3 partitions,
since a 32GB SD card is never 32GB but more
like 31.4GB.)<br clear="none">
<br clear="none">
"THE KURZWEIL" meaning the K2500 for sure (I
have one), but my
question is whether the K2000 is able to do
this, and if so, what is the
minimum OS that can do it.<br clear="none">
<br clear="none">
BTW, the "partitioning" is
computer-compatible partitioning;
that is, if you hook the drive/card into a
computer - Mac or Windows -
all the partitions will show up, mounted on
the computer.<br clear="none">
<br clear="none">
Again, the K2500 does this - does the K2000?<br clear="none">
<br clear="none">
(I know Gordon answered this but I'm asking
for a further confirmation.
See other post.)<br clear="none">
<br clear="none">
<blockquote class="yiv6115842520cite" type="cite">On Sun, Feb 23, 2020 at
02:46:08PM -0600, 'Chicken Systems, Inc.'
<a rel="nofollow" shape="rect" ymailto="mailto:[email protected]" target="_blank" href="mailto:[email protected]" moz="true">[email protected]</a>
[KurzList]
wrote:<br clear="none">
<blockquote class="yiv6115842520cite" type="cite">> At 01:51 PM 2/23/2020,
you
wrote:<br clear="none">
> <br clear="none">
> >> What OS supports
partitioning a larger SCSI drive to
separate 2GB partitions?<br clear="none">
> >> This is the K2000, not the
K25000 or higher.<br clear="none">
> <br clear="none">
> >I don't think any of them do. I
guess if you were using a
SCSI2SD-type device and tweaked the
software you could make a card larger
than 2GB appear as multiple 2GB units.<br clear="none">
> <br clear="none">
> The K2500 supports partitioning -
that is, if you have a 8GB disk it
understands that and asks you if you
want to split it into 4 partitions.
I was almost 100% positive that the
K2000 did this, of course in later
operating systems.<br clear="none">
> <br clear="none">
> The question is - if so, what min
Kurzweil OS? <br clear="none">
> <br clear="none">
<br clear="none">
I'm running the very latest, 3.87J
(Janis chipset). It definitely does
not support partitioning.</blockquote>
</blockquote>
<br clear="none">
<br clear="none">
<div>Garth Hjelte</div>
<div>Sampler User</div>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
<!-- end group email -->
</blockquote>
<br>
</p>
</div>
<!--~-|**|PrettyHtmlStart|**|-~-->
<div style="color: #fff; height: 0;">__._,_.___</div>
<div style="clear:both"> </div>
<div id="fromDMARC" style="margin-top: 10px;">
<hr style="height:2px ; border-width:0; color:#E3E3E3; background-color:#E3E3E3;">
Posted by: Dana Fiorucci <[email protected]> <hr style="height:2px ; border-width:0; color:#E3E3E3; background-color:#E3E3E3;">
</div>
<div style="clear:both"> </div>
<table cellspacing=4px style="margin-top: 10px; margin-bottom: 10px; color: #2D50FD;">
<tbody>
<tr>
<td style="font-size: 12px; font-family: arial; font-weight: bold; padding: 7px 5px 5px;" >
<a style="text-decoration: none; color: #2D50FD" href="https://groups.yahoo.com/neo/groups/KurzList/conversations/messages/31995;_ylc=X3oDMTJxdGJnc3VxBF9TAzk3MzU5NzE0BGdycElkAzI3MjE5MDcEZ3Jwc3BJZAMxNzA1MDMyMTQ0BG1zZ0lkAzMxOTk1BHNlYwNmdHIEc2xrA3JwbHkEc3RpbWUDMTU4MjYxNTI3MA--?act=reply&messageNum=31995">Reply via web post</a>
</td>
<td>•</td>
<td style="font-size: 12px; font-family: arial; padding: 7px 5px 5px;" >
<a href="mailto:[email protected]?subject=Re%3A%20%5BKL%5D%20Partition%20support%20K2000" style="text-decoration: none; color: #2D50FD;">
Reply to sender </a>
</td>
<td>•</td>
<td style="font-size: 12px; font-family: arial; padding: 7px 5px 5px;">
<a href="mailto:[email protected]?subject=Re%3A%20%5BKL%5D%20Partition%20support%20K2000" style="text-decoration: none; color: #2D50FD">
Reply to group </a>
</td>
<td>•</td>
<td style="font-size: 12px; font-family: arial; padding: 7px 5px 5px;" >
<a href="https://groups.yahoo.com/neo/groups/KurzList/conversations/newtopic;_ylc=X3oDMTJlbW5zZnFhBF9TAzk3MzU5NzE0BGdycElkAzI3MjE5MDcEZ3Jwc3BJZAMxNzA1MDMyMTQ0BHNlYwNmdHIEc2xrA250cGMEc3RpbWUDMTU4MjYxNTI3MA--" style="text-decoration: none; color: #2D50FD">Start a New Topic</a>
</td>
<td>•</td>
<td style="font-size: 12px; font-family: arial; padding: 7px 5px 5px;color: #2D50FD;" >
<a href="https://groups.yahoo.com/neo/groups/KurzList/conversations/topics/31978;_ylc=X3oDMTM2ZnMzcHJhBF9TAzk3MzU5NzE0BGdycElkAzI3MjE5MDcEZ3Jwc3BJZAMxNzA1MDMyMTQ0BG1zZ0lkAzMxOTk1BHNlYwNmdHIEc2xrA3Z0cGMEc3RpbWUDMTU4MjYxNTI3MAR0cGNJZAMzMTk3OA--" style="text-decoration: none; color: #2D50FD;">Messages in this topic</a>
(18)
</td>
</tr>
</tbody>
</table>
<!------- Start Nav Bar ------>
<!-- |**|begin egp html banner|**| -->
<!-- |**|end egp html banner|**| -->
<div id="ygrp-grfd" style="font-family: Verdana; font-size: 12px; padding: 15px 0;">
<!-- |**|begin egp html banner|**| -->
To QUIT KurzList, send a *blank* message to [email protected] <BR>
It will take from 24 to 48 hours for Yahoo!Groups to cancel you.
<!-- |**|end egp html banner|**| -->
</div>
<!-- |**|begin egp html banner|**| -->
<div id="ygrp-vital" style="background-color: #f2f2f2; font-family: Verdana; font-size: 10px; margin-bottom: 10px; padding: 10px;">
<span id="vithd" style="font-weight: bold; color: #333; text-transform: uppercase; "><a href="https://groups.yahoo.com/neo/groups/KurzList/info;_ylc=X3oDMTJlMGo0czJzBF9TAzk3MzU5NzE0BGdycElkAzI3MjE5MDcEZ3Jwc3BJZAMxNzA1MDMyMTQ0BHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTU4MjYxNTI3MA--" style="text-decoration: none;">Visit Your Group</a></span>
<ul style="list-style-type: none; margin: 0; padding: 0; display: inline;">
</ul>
</div>
<div id="ft" style="font-family: Arial; font-size: 11px; margin-top: 5px; padding: 0 2px 0 0; clear: both;">
<a href="https://groups.yahoo.com/neo;_ylc=X3oDMTJkYTE3cnNuBF9TAzk3NDc2NTkwBGdycElkAzI3MjE5MDcEZ3Jwc3BJZAMxNzA1MDMyMTQ0BHNlYwNmdHIEc2xrA2dmcARzdGltZQMxNTgyNjE1Mjcw" style="float: left;"><img src="https://s.yimg.com/ru/0.9.12/min/css/yahoo_en-US_f_pw_101x21.png" height="21" width="101" alt="Yahoo! Groups" style="border: 0;"/></a>
<div style="color: #747575; float: right;"> • <a href="https://info.yahoo.com/privacy/us/yahoo/groups/details.html" style="text-decoration: none;">Privacy</a> • <a href="mailto:[email protected]?subject=Unsubscribe" style="text-decoration: none;">Unsubscribe</a> • <a href="https://info.yahoo.com/legal/us/yahoo/utos/terms/" style="text-decoration: none;">Terms of Use</a> </div>
</div>
<br>
<!-- |**|end egp html banner|**| -->
</div> <!-- ygrp-msg -->
<!-- Sponsor -->
<!-- |**|begin egp html banner|**| -->
<div id="ygrp-sponsor" style="width:160px; float:right; clear:none; margin:0 0 25px 0; background: #fff;">
<!-- Start Recommendations -->
<div id="ygrp-reco">
</div>
<!-- End Recommendations -->
</div> <!-- |**|end egp html banner|**| -->
<div style="clear:both; color: #FFF; font-size:1px;">.</div>
</div>
<img src="http://geo.yahoo.com/serv?s=97359714/grpId=2721907/grpspId=1705032144/msgId=31995/stime=1582615270" width="1" height="1"> <br>
<img src="http://y.analytics.yahoo.com/fpc.pl?ywarid=515FB27823A7407E&a=10001310322279&js=no&resp=img" width="1" height="1">
<div style="color: #fff; height: 0;">__,_._,___</div>
<!--~-|**|PrettyHtmlEnd|**|-~-->
</body>
<!--~-|**|PrettyHtmlStart|**|-~-->
<head>
<style type="text/css">
<!--
#ygrp-mkp {
border: 1px solid #d8d8d8;
font-family: Arial;
margin: 10px 0;
padding: 0 10px;
}
#ygrp-mkp hr {
border: 1px solid #d8d8d8;
}
#ygrp-mkp #hd {
color: #628c2a;
font-size: 85%;
font-weight: 700;
line-height: 122%;
margin: 10px 0;
}
#ygrp-mkp #ads {
margin-bottom: 10px;
}
#ygrp-mkp .ad {
padding: 0 0;
}
#ygrp-mkp .ad p {
margin: 0;
}
#ygrp-mkp .ad a {
color: #0000ff;
text-decoration: none;
}
#ygrp-sponsor #ygrp-lc {
font-family: Arial;
}
#ygrp-sponsor #ygrp-lc #hd {
margin: 10px 0px;
font-weight: 700;
font-size: 78%;
line-height: 122%;
}
#ygrp-sponsor #ygrp-lc .ad {
margin-bottom: 10px;
padding: 0 0;
}
#actions {
font-family: Verdana;
font-size: 11px;
padding: 10px 0;
}
#activity {
background-color: #e0ecee;
float: left;
font-family: Verdana;
font-size: 10px;
padding: 10px;
}
#activity span {
font-weight: 700;
}
#activity span:first-child {
text-transform: uppercase;
}
#activity span a {
color: #5085b6;
text-decoration: none;
}
#activity span span {
color: #ff7900;
}
#activity span .underline {
text-decoration: underline;
}
.attach {
clear: both;
display: table;
font-family: Arial;
font-size: 12px;
padding: 10px 0;
width: 400px;
}
.attach div a {
text-decoration: none;
}
.attach img {
border: none;
padding-right: 5px;
}
.attach label {
display: block;
margin-bottom: 5px;
}
.attach label a {
text-decoration: none;
}
blockquote {
margin: 0 0 0 4px;
}
.bold {
font-family: Arial;
font-size: 13px;
font-weight: 700;
}
.bold a {
text-decoration: none;
}
dd.last p a {
font-family: Verdana;
font-weight: 700;
}
dd.last p span {
margin-right: 10px;
font-family: Verdana;
font-weight: 700;
}
dd.last p span.yshortcuts {
margin-right: 0;
}
div.attach-table div div a {
text-decoration: none;
}
div.attach-table {
width: 400px;
}
div.file-title a, div.file-title a:active, div.file-title a:hover, div.file-title a:visited {
text-decoration: none;
}
div.photo-title a, div.photo-title a:active, div.photo-title a:hover, div.photo-title a:visited {
text-decoration: none;
}
div#ygrp-mlmsg #ygrp-msg p a span.yshortcuts {
font-family: Verdana;
font-size: 10px;
font-weight: normal;
}
.green {
color: #628c2a;
}
.MsoNormal {
margin: 0 0 0 0;
}
o {
font-size: 0;
}
#photos div {
float: left;
width: 72px;
}
#photos div div {
border: 1px solid #666666;
height: 62px;
overflow: hidden;
width: 62px;
}
#photos div label {
color: #666666;
font-size: 10px;
overflow: hidden;
text-align: center;
white-space: nowrap;
width: 64px;
}
#reco-category {
font-size: 77%;
}
#reco-desc {
font-size: 77%;
}
.replbq {
margin: 4px;
}
#ygrp-actbar div a:first-child {
/* border-right: 0px solid #000;*/
margin-right: 2px;
padding-right: 5px;
}
#ygrp-mlmsg {
font-size: 13px;
font-family: Arial, helvetica,clean, sans-serif;
*font-size: small;
*font: x-small;
}
#ygrp-mlmsg table {
font-size: inherit;
font: 100%;
}
#ygrp-mlmsg select, input, textarea {
font: 99% Arial, Helvetica, clean, sans-serif;
}
#ygrp-mlmsg pre, code {
font:115% monospace;
*font-size:100%;
}
#ygrp-mlmsg * {
line-height: 1.22em;
}
#ygrp-mlmsg #logo {
padding-bottom: 10px;
}
#ygrp-msg p a {
font-family: Verdana;
}
#ygrp-msg p#attach-count span {
color: #1E66AE;
font-weight: 700;
}
#ygrp-reco #reco-head {
color: #ff7900;
font-weight: 700;
}
#ygrp-reco {
margin-bottom: 20px;
padding: 0px;
}
#ygrp-sponsor #ov li a {
font-size: 130%;
text-decoration: none;
}
#ygrp-sponsor #ov li {
font-size: 77%;
list-style-type: square;
padding: 6px 0;
}
#ygrp-sponsor #ov ul {
margin: 0;
padding: 0 0 0 8px;
}
#ygrp-text {
font-family: Georgia;
}
#ygrp-text p {
margin: 0 0 1em 0;
}
#ygrp-text tt {
font-size: 120%;
}
#ygrp-vital ul li:last-child {
border-right: none !important;
}
-->
</style>
</head>
<!--~-|**|PrettyHtmlEnd|**|-~-->
</html>
<!-- end group email -->
--------------D61BEC1949DE297E127AC837--