Re: Re: Assigning Midi in Cubas and Kontakt 4 for Z-tar

Hi Richard, there's no midi data coming into Midi Ox from the zones set to other channels than 1. I made sure that the zone was set correctly and the channel was set correctly. I went to a different kit, then came back to the kit above 8 to make sure nothing had changed. I opened the zone to make sure that it was still assigned properly and then checked it's Midi assignment. Everything was as it was supposed to be but still no data coming to the Midi Ox.

I decided maybe it was just channel 2 so I changed the Ztar's zone to channel 3 while Cubase was up (and Midi Ox had been turned off (because it won't run with Cubase using up so much memory). 

When I went to channel 3 and played something in the zone assigned to that channel, I saw activity on the fader but a kind of automation command must have been issued by the Ztar cause when I went to the track fader, it was set to Zero. When I raised it and played in the zone again, it had stopped sending activity to the fader. 

Here's the deal now. If the Ztar is set to channel 4 and Prologue is set to channel 4, the zone with channel 4 doesn't play. Zone 1 plays the sound assigned in prologue even though Zone 1 is set to channel 1 and Prologue is set to channel 4. Weird.