| Newsgroups |
gmane.music.equipment.midi-guitar |
| Message-ID |
<[email protected]> |
Hi All,
I'll jump in . I admit I haven't been monitoring the midiguitar group
and don't know the latest or the level of activity.
About 6-string bass tuning: yes there's a preset for that. In the menu
system: FRETBOARD/TUNINGS/PRESET. Just hit the button to the right of
the word "Preset" and scroll to the 6-stringBass tuning. You can also
set it up yourself in the Tuning menu, or any tuning for that matter.
So, select it and hit the WRITE button to save the Ztar-patch or "Song".
Or go to the WRITE menu to save to another location and change the name
so it appears as you like it.
About the Trigger Cap, the plastic may have warped, I've seen that
before. Feel free to remove material from the underside, or simply
elevate it with a couple of washers. Or order a new one.
cheers,
harvey
On 1/6/2015 8:39 AM, JAMES HARRISON [email protected] [midiguitar] wrote:
> Hi, Richard. Thanks for the response. Given that I'm the village
> midiot I need to know nearly everything! [ggg]
>
> But for right now: Does the Z6S have a patch/song/whatever that gives
> BEADGC [six string bass] tuning? If so how exactly do I activate it?
> If not, how do I set one up and save it so I don't screw up everything else?
>
> BTW, when I received the [used] Z6S only 2 or 3 strings would MOL
> trigger [but not properly]. I found the trigger pad housing that sits
> over the string triggers seemed to have deformed/sagged down so that it
> physically touched the string triggers and was damping them totally
> out. Elevating the touch pad housing about 1/8" allowed all strings to
> trigger. Upon examining the trigger pad housing I could see that
> someone had used a rotary tool to try to grind away sufficient material
> to clear the string/triggers. Is a common problem? Is this an approved
> solution? The seller says it came this way after a major upgrade in
> March of 2013.
>
> Regards,
> James
> .
> .
>
>
>> Mon Jan 5, 2015 7:10 am (PST) . Posted by:
>>
>>
>> "richard brown" napravobg
>> <mailto:[email protected]?subject=Re%3A%20ZTAR%20USERS%3F%3F%3F>
>>
>>
>> Hi James..
>> and a Happy New Year to all Midi guitarists everywhere.
>>
>> Yes, I have;
>> a VR3 (wooden stratty-type ) Ztar with r/h strings) TC1 trigger pads,
>> ribbon, neck strip and breath controller.
>> a Z1 (steinberg-type) composite material Ztar, with r/h trigger pads)
>> and two Mini Zx Ztars, both with r/h trigger pads, one of them with
>> neck strip, breath controller, and expanded memory..
>>
>> What do you need to know?
>>
>> richard
>>
>> bg (Bulgaria)
>> <mailto:[email protected]?subject=Re%3A%20ZTAR%20USERS%3F%3F%3F>
>
>
> ------------------------------------
> Posted by: JAMES HARRISON <[email protected]>
> ------------------------------------
>
> --to unsubscribe send a blank message to [email protected]
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
>
------------------------------------
Posted by: Harvey Starr <[email protected]>
------------------------------------
--to unsubscribe send a blank message to [email protected]