| Newsgroups |
gmane.music.equipment.midi-guitar |
| Message-ID |
<[email protected]> |
Well here's where the main problem arises - I know slightly less than nothing about guitars. I can talk synths, but I wouldn't know an EMG pickup if it said EMG on it in big letters. :P
Sent from my iPhone
> On Feb 1, 2015, at 22:00, "David Messenger [email protected] [midiguitar]" <[email protected]> wrote:
>
> Are the pickups EMG? You probably have an EMG preamp.
>
> D.
>
>> On 2/1/2015 7:33 PM, [email protected] [midiguitar] wrote:
>>
>> I don't think it's for saving memory. All of the guitar's settings are set with physical switches.
>>
>> Sent from my iPhone
>>
>> On Feb 1, 2015, at 20:46, "David Messenger [email protected] [midiguitar]" <[email protected]> wrote:
>>
>>>
>>> So that means that you probably have a preamp, or the casio needs it for memory. Most probably the latter....
>>>
>>> D.
>>>
>>>> On 2/1/2015 5:16 PM, [email protected] [midiguitar] wrote:
>>>>
>>>> Update!!!
>>>>
>>>> So today I was changing my strings and one of the ball-ends didn't want to fall out the back of the guitar, so I removed the plate that covers those holes - I had never removed it before. Expecting to see five springs there, I was quite surprised to see only three springs and a 9V battery where the other two springs should be. The black wire from the 9V is soldered onto the metal plate that the three springs are attached to, the red wire disappears into the guts. I'm about 99.9% sure this is connected to the extra toggle switch I have next to the SINGLE/HUMBUCKER toggle.
>>>>
>>>> Sent from my iPhone
>>>>
>>>> On May 4, 2014, at 23:53, David Messenger <[email protected]> wrote:
>>>>
>>>>>
>>>>> Could be a Coil tap or Phase switch...
>>>>>
>>>>>
>>>>>> On 5/4/2014 7:25 PM, [email protected] wrote:
>>>>>>
>>>>>> Hello all,
>>>>>>
>>>>>>
>>>>>>
>>>>>> I've noticed while looking around at net images of Casio MG-500's that some appear to have two toggle switches in-between the volume and tone controls, though it appears that most show only one. The copy of the User Manual I have from this group only shows there being one toggle (humbucking/single). I'm wondering if there was a ever a slightly different version of the MG-500 that might have had a second toggle place next to the first, or if this is likely just the result of a common modification made by owners?
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> James
>>>>>>
>
>