Re: BUG: IR and Timers.pm

Mike,

I was able to reproduce this by setting my my Sony remote for a Panasonic
TV (code 16).  Actually it seems *all* the buttons on the remote get
interpreted as the JVC code "a0 02".

I'll take a look on the scope. I'm allowing a little bit of a margin when
measuring the pulse widths - it may be that I need to reduce the
tolerance.  Probably the panasonic code is a 32-bit code whose start pulse
and first 16 bits look like a JVC code.

Sean


On Tue, 16 Oct 2001, Mike O'Connor wrote:

>
> Below is a log which is being printed by the server (current 1.21).
>
> As you can see there is some type of problem with Timers.pm.
>
> Also I'm not in the room where the slimp3 device is located and I'm getting
> spurious IR command, it would seem to me that this shows that the IR system
> has some really problems.
>
> I have a problem where the channel down on my TV and the power of the slimp3
> get interpreted as the same code. Even thought the power down on the slimp3
> does not affect the TV.
>
> I have bourght this up a couple of times now and do not seem to be getting a
> clear answer.
>
> Cheers
>     Mike O'Connor
>
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> irCode not defined: 01
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> irCode not defined: 00
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> irCode not defined: a0
> irCode not defined: 00
> irCode not defined: 04
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> irCode not defined: 00
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> irCode not defined: 00
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
> readline() on closed filehandle SliMP3::Timers::IN at lib/SliMP3/Timers.pm
> line 182.
>
>
>
> To unsubscribe from this group, send an email to:
> [email protected]
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get your FREE VeriSign guide to security solutions for your web site: encrypting transactions, securing intranets, and more!
http://us.click.yahoo.com/UnN2wB/m5_CAA/yigFAA/rIp0lB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
[email protected]

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/