Re: volume control...

On Sun, Oct 07, 2001 at 01:40:41AM +0000, Sean Adams wrote:
> 
> Mark,
> 
> Does the Pronto let you program abitrary pulses - can you say "2ms
> low, 1 ms high, etc. at 39KHz modulation", or does it have to learn the
> codes from an existing remote?
> 
> If so then we could easily make an alternate code for the SliMP3 that
> won't conflict with JVC, but has a similar format, so no changes will be
> needed on the player.
> 
> For now it'll be only useful if you have a Pronto, but later we could make
> it the code for our custom remote.
> 


Well, the answer is yes -- sort of.  The Pronto can learn from any
remote, but you can also directly input "discrete" IR codes.  These
"discrete" codes specify the pulse frequency and modulation.

The best reference for this is found here:
  http://www.remotecentral.com/features/irdisp1.htm

(more general info on the capabilities of the Pronto can be found here:
  http://www.remotecentral.com/files/main.htm)

Learned codes can also be displayed -- and modified -- as hex-format
discrete codes.

I know Dan has one as well, and may be better-versed in this than
I am.

-- 
Mark C. Langston
[email protected]
Systems & Network Admin
http://www.bitshift.org

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Pinpoint the right security solution for your company- Learn how to add 128- bit encryption and to authenticate your web site with VeriSign's FREE guide!
http://us.click.yahoo.com/yQix2C/33_CAA/yigFAA/rIp0lB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
[email protected]

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/