Re: Re: Yamaha WT11 factory patches / performances, on a TX81Z? [7 Attachments]

"Martin Tarenskeen [email protected] [YamahaDX]" <[email protected]>
Newsgroups gmane.music.equipment.yamaha-dx
Message-ID <[email protected]>

On Wed, 14 Aug 2018, [email protected] [YamahaDX] wrote:

> > I have created an overview of the bank A, B and C performance data that
> shows which voicepresets and other settings are used by each performance.
> 
> Thanks, Martin, that's very useful.  It's much easier to read those lists than to try to find out the details of the performances by using the
> Secret Mode performance editor / menu diving experience...


Next step in my experiments: Starting from the WT11 factory performance 
and voice banks, I have created four sysex banks containing both Voice 
and Performance data. Big trick: each bank contains 32 voices and 32 
performances that can be loaded as SysEx in the Internal (RAM) user voice 
and performance banks and the performances only use these Internal 
userbank. This mean they are not only playable on a WT11 but also on a 
TX81Z, DX11, WT11, YS200, TQ5, and V50.

A special note about bank C: I have created 2 banks from that named 
WT11-PFC.syx and WT11-PFD.syx. In the PFC bank the voices that used WT11 
voicebank C will sound right, in the PFD bank the voices that used WT11 
voicebank D will sound right. In both banks a few performances will sound 
strange and not match their name. Who cares. I give you 4 new 
performance+voice banks for free :-)

Also attached: slightly improved versions of the performance parameter 
listings.

P.S. I just started up my old YSEDITOR PLUS for Atari on my Hatari 
emulator (STeem should also work). I see it also supports WT11 and allows 
editing FM Voice parameters and Performance parameters. For performances 
it only supports the current editbuffer performance, it does not have a 
performance bankmanager for 32 performances. I now remember I borrowed a 
WT11 for one week from my local musicshop back in the 90's to do some 
testing with my Atari when I was developing the program. Good old days :-)


-- 

MT
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.