Re: Argus on FreeBSD

root     radium     49424 3  tcp6   *:561                 *:*


On Tue, Jul 4, 2017 at 11:37 AM, mike tancsa <[email protected]> wrote:

>
> Try
> sockstat | grep 561
>
> to see what is bound on port 561 as it does not seem to be argus
>
>         ---Mike
>
> On 7/4/2017 11:29 AM, Monah Baki wrote:
> > root     argus      49407 3  tcp4   192.168.1.253:562
> > <http://192.168.1.253:562>     *:*
> > root     argus      49407 6  udp4   *:*                   *:*
> > root     argus      49407 7  tcp4   192.168.1.253:562
> > <http://192.168.1.253:562>     192.168.1.253:40196
> > <http://192.168.1.253:40196>
> >
> >
> > In my argus.conf, I did specify the IP address to bind to.
> > ARGUS_BIND_IP="192.168.1.253"
> >
> >
> >
> > Thanks
> > Monah
> >
> > On Tue, Jul 4, 2017 at 11:07 AM, Mike Tancsa <[email protected]
> > <mailto:[email protected]>> wrote:
> >
> >     On 7/3/2017 11:42 AM, Monah Baki wrote:
> >     >
> >     > Compiled yesterday argus 3.0.8.2 on FreeBSD 10.3-RELEASE-p18. I
> noticed
> >     > that running:
> >     >
> >     > netstat -an
> >     > tcp4       0      0 *.562
> >     > tcp6       0      0 *.561
> >
> >     > Is it possible that tcp6 might be the issue, not sure why it's
> running
> >     > on tcp6 when in my rc.cong I have the following:
> >     I usually tell it to bind to a specific IP in my argus config to
> make it
> >     more predictable. But what does
> >
> >     sockstat | grep argus
> >
> >     show ?
> >
> >             ---Mike
> >
> >
> >     --
> >     -------------------
> >     Mike Tancsa, tel +1 519 651 3400 <tel:%2B1%20519%20651%203400>
> >     Sentex Communications, [email protected] <mailto:[email protected]>
> >     Providing Internet services since 1994 www.sentex.net
> >     <http://www.sentex.net>
> >     Cambridge, Ontario Canada   http://www.tancsa.com/
> >
> >
>
>