Re: CPU load graph is not showing for some machines.

Thanks now when i started collecting data one of the host giving warning
logs. Why so for one host only but it is showing graphs too. but i am not
able to get graph for LVM partition for this host only. What can be the
issue ?

05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[423] SNMP: v2:
192.168.0.253, dsname: hdd_used, oid: .1.3.6.1.4.1.2021.9.1.8.1, output:
12192732
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] WARNING: Result
from SNMP not valid.  Partial Result: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] SNMP: v2:
192.168.0.253, dsname: 15Min_LoadAvg, oid:
.1.3.6.1.4.1.2021.13.15.1.1.11.20, output: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] WARNING: Result
from SNMP not valid.  Partial Result: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] SNMP: v2:
192.168.0.253, dsname: 5Min_LoadAvg, oid:
.1.3.6.1.4.1.2021.13.15.1.1.10.20, output: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] WARNING: Result
from SNMP not valid.  Partial Result: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] SNMP: v2:
192.168.0.253, dsname: 1Min_LoadAvg, oid: .1.3.6.1.4.1.2021.13.15.1.1.9.20,
output: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[560] SNMP: v2:
192.168.0.253, dsname: Bytes_Written, oid:
.1.3.6.1.4.1.2021.13.15.1.1.13.19, output: 3307897880576
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[560] SNMP: v2:
192.168.0.253, dsname: Bytes_Read, oid: .1.3.6.1.4.1.2021.13.15.1.1.12.19,
output: 19766380222976
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] WARNING: Result
from SNMP not valid.  Partial Result: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] SNMP: v2:
192.168.0.253, dsname: 1Min_LoadAvg, oid: .1.3.6.1.4.1.2021.13.15.1.1.9.24,
output: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] WARNING: Result
from SNMP not valid.  Partial Result: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] SNMP: v2:
192.168.0.253, dsname: 5Min_LoadAvg, oid:
.1.3.6.1.4.1.2021.13.15.1.1.10.24, output: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] WARNING: Result
from SNMP not valid.  Partial Result: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] SNMP: v2:
192.168.0.253, dsname: 15Min_LoadAvg, oid:
.1.3.6.1.4.1.2021.13.15.1.1.11.24, output: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[574] SNMP: v2:
192.168.0.253, dsname: Bytes_Read, oid: .1.3.6.1.4.1.2021.13.15.1.1.12.20,
output: 106657347072
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[574] SNMP: v2:
192.168.0.253, dsname: Bytes_Written, oid:
.1.3.6.1.4.1.2021.13.15.1.1.13.20, output: 18884599365632
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] WARNING: Result
from SNMP not valid.  Partial Result: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] SNMP: v2:
192.168.0.253, dsname: 1Min_LoadAvg, oid: .1.3.6.1.4.1.2021.13.15.1.1.9.19,
output: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] WARNING: Result
from SNMP not valid.  Partial Result: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] SNMP: v2:
192.168.0.253, dsname: 5Min_LoadAvg, oid:
.1.3.6.1.4.1.2021.13.15.1.1.10.19, output: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] WARNING: Result
from SNMP not valid.  Partial Result: U
05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] SNMP: v2:
192.168.0.253, dsname: 15Min_LoadAvg, oid:
.1.3.6.1.4.1.2021.13.15.1.1.11.19, output: U

Thanks,



On Wed, May 15, 2013 at 10:01 PM, Gandalf <[email protected]> wrote:

> Please run a "Verbose Query" from the hosts edit screen. This shall show
> you,
> how many processors are detected.
> Elese see debugging help in the documentation at http://doce.cacti.netfor more help
> R.
>
> On 15.05.2013 08:49, Mohit Vadhera wrote:
> > Few graphs like cpuUsage, loadAverage, memoryUsage  are not being
> displayed
> > on the browser for couple of machines . I am not sure if it is
> > configuration problem because i have not admin password for cacti. Some
> > machines are displaying 23 graphs including mentioned graphs but some are
> > displaying 20 . It is clear that cacti is working for machine but not
> > showing only 3  graphs. I may need to configure on server side but i am
> not
> > sure. I never worked on cacti before. Can anybody help me to diagnose
> this.
> >
> > Thanks,
> >
> ------------------------------------------------------------------------------
> > AlienVault Unified Security Management (USM) platform delivers complete
> > security visibility with the essential security capabilities. Easily and
> > efficiently configure, manage, and operate all of your security controls
> > from a single console and one unified framework. Download a free trial.
> > http://p.sf.net/sfu/alienvault_d2d
> > _______________________________________________
> > cacti-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/cacti-user
> >
>
>
> ------------------------------------------------------------------------------
> AlienVault Unified Security Management (USM) platform delivers complete
> security visibility with the essential security capabilities. Easily and
> efficiently configure, manage, and operate all of your security controls
> from a single console and one unified framework. Download a free trial.
> http://p.sf.net/sfu/alienvault_d2d
> _______________________________________________
> cacti-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/cacti-user
>
------------------------------------------------------------------------------
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities. Easily and
efficiently configure, manage, and operate all of your security controls
from a single console and one unified framework. Download a free trial.
http://p.sf.net/sfu/alienvault_d2d