Re: CPU load graph is not showing for some machines.

Mohit Vadhera <[email protected]>
Newsgroups gmane.network.cacti.user
Message-ID <CAGZOQ8MKV7pGqY=5BbABrKL5CqXjCMV4kDUGgXupC8xLjqYPbQ@mail.gmail.com> 
but why graph is being created so far . The other issue is i am not getting
graph for new mounted volume. I am not getting information for new volume .

root@puppet:~# snmpwalk -v1 -c theyhavelanded  hmaster
1.3.6.1.4.1.2021.9.1.2
UCD-SNMP-MIB::dskPath.1 = STRING: /
UCD-SNMP-MIB::dskPath.2 = STRING: /hdfs
UCD-SNMP-MIB::dskPath.3 = STRING: /var/log
UCD-SNMP-MIB::dskPath.4 = STRING: /export




File that is being used for getting OID is
/usr/share/cacti/resource/snmp_queries/net-snmp_disk.xml

<dskPath>
                        <name>Mount Point</name>
                        <method>walk</method>
                        <source>value</source>
                        <direction>input</direction>
                        <oid>.1.3.6.1.4.1.2021.9.1.2</oid>
                </dskPath>


Thanks,



On Thu, May 16, 2013 at 11:33 PM, Gandalf <[email protected]> wrote:

> From
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] WARNING:
> Result
> > from SNMP not valid.  Partial Result: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] SNMP: v2:
> > 192.168.0.253, dsname: 15Min_LoadAvg, oid:
>
> you see, that the OID is missing. You should reindex the data query for
> host 42
> and retry.
> Or you might want to look at System Utilities -> View Poller Cache after
> reindexing, filtering for that host. You will see the OID, if not,
> something's
> broken
>
> Reinhard
>
> On 16.05.2013 19:33, Mohit Vadhera wrote:
> > Thanks now when i started collecting data one of the host giving warning
> > logs. Why so for one host only but it is showing graphs too. but i am not
> > able to get graph for LVM partition for this host only. What can be the
> > issue ?
> >
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[423] SNMP: v2:
> > 192.168.0.253, dsname: hdd_used, oid: .1.3.6.1.4.1.2021.9.1.8.1, output:
> > 12192732
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] WARNING:
> Result
> > from SNMP not valid.  Partial Result: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] SNMP: v2:
> > 192.168.0.253, dsname: 15Min_LoadAvg, oid:
> > .1.3.6.1.4.1.2021.13.15.1.1.11.20, output: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] WARNING:
> Result
> > from SNMP not valid.  Partial Result: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] SNMP: v2:
> > 192.168.0.253, dsname: 5Min_LoadAvg, oid:
> > .1.3.6.1.4.1.2021.13.15.1.1.10.20, output: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] WARNING:
> Result
> > from SNMP not valid.  Partial Result: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[553] SNMP: v2:
> > 192.168.0.253, dsname: 1Min_LoadAvg, oid:
> .1.3.6.1.4.1.2021.13.15.1.1.9.20,
> > output: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[560] SNMP: v2:
> > 192.168.0.253, dsname: Bytes_Written, oid:
> > .1.3.6.1.4.1.2021.13.15.1.1.13.19, output: 3307897880576
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[560] SNMP: v2:
> > 192.168.0.253, dsname: Bytes_Read, oid:
> .1.3.6.1.4.1.2021.13.15.1.1.12.19,
> > output: 19766380222976
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] WARNING:
> Result
> > from SNMP not valid.  Partial Result: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] SNMP: v2:
> > 192.168.0.253, dsname: 1Min_LoadAvg, oid:
> .1.3.6.1.4.1.2021.13.15.1.1.9.24,
> > output: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] WARNING:
> Result
> > from SNMP not valid.  Partial Result: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] SNMP: v2:
> > 192.168.0.253, dsname: 5Min_LoadAvg, oid:
> > .1.3.6.1.4.1.2021.13.15.1.1.10.24, output: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] WARNING:
> Result
> > from SNMP not valid.  Partial Result: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[564] SNMP: v2:
> > 192.168.0.253, dsname: 15Min_LoadAvg, oid:
> > .1.3.6.1.4.1.2021.13.15.1.1.11.24, output: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[574] SNMP: v2:
> > 192.168.0.253, dsname: Bytes_Read, oid:
> .1.3.6.1.4.1.2021.13.15.1.1.12.20,
> > output: 106657347072
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[574] SNMP: v2:
> > 192.168.0.253, dsname: Bytes_Written, oid:
> > .1.3.6.1.4.1.2021.13.15.1.1.13.20, output: 18884599365632
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] WARNING:
> Result
> > from SNMP not valid.  Partial Result: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] SNMP: v2:
> > 192.168.0.253, dsname: 1Min_LoadAvg, oid:
> .1.3.6.1.4.1.2021.13.15.1.1.9.19,
> > output: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] WARNING:
> Result
> > from SNMP not valid.  Partial Result: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] SNMP: v2:
> > 192.168.0.253, dsname: 5Min_LoadAvg, oid:
> > .1.3.6.1.4.1.2021.13.15.1.1.10.19, output: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] WARNING:
> Result
> > from SNMP not valid.  Partial Result: U
> > 05/12/2013 06:25:06 AM - CMDPHP: Poller[0] Host[42] DS[575] SNMP: v2:
> > 192.168.0.253, dsname: 15Min_LoadAvg, oid:
> > .1.3.6.1.4.1.2021.13.15.1.1.11.19, output: U
> >
> > Thanks,
> >
> >
> >
> > On Wed, May 15, 2013 at 10:01 PM, Gandalf <[email protected]> wrote:
> >
> >> Please run a "Verbose Query" from the hosts edit screen. This shall show
> >> you,
> >> how many processors are detected.
> >> Elese see debugging help in the documentation at
> http://doce.cacti.netfor more help
> >> R.
> >>
> >> On 15.05.2013 08:49, Mohit Vadhera wrote:
> >>> Few graphs like cpuUsage, loadAverage, memoryUsage  are not being
> >> displayed
> >>> on the browser for couple of machines . I am not sure if it is
> >>> configuration problem because i have not admin password for cacti. Some
> >>> machines are displaying 23 graphs including mentioned graphs but some
> are
> >>> displaying 20 . It is clear that cacti is working for machine but not
> >>> showing only 3  graphs. I may need to configure on server side but i am
> >> not
> >>> sure. I never worked on cacti before. Can anybody help me to diagnose
> >> this.
> >>>
> >>> Thanks,
> >>>
> >>
> ------------------------------------------------------------------------------
> >>> AlienVault Unified Security Management (USM) platform delivers complete
> >>> security visibility with the essential security capabilities. Easily
> and
> >>> efficiently configure, manage, and operate all of your security
> controls
> >>> from a single console and one unified framework. Download a free trial.
> >>> http://p.sf.net/sfu/alienvault_d2d
> >>> _______________________________________________
> >>> cacti-user mailing list
> >>> [email protected]
> >>> https://lists.sourceforge.net/lists/listinfo/cacti-user
> >>>
> >>
> >>
> >>
> ------------------------------------------------------------------------------
> >> AlienVault Unified Security Management (USM) platform delivers complete
> >> security visibility with the essential security capabilities. Easily and
> >> efficiently configure, manage, and operate all of your security controls
> >> from a single console and one unified framework. Download a free trial.
> >> http://p.sf.net/sfu/alienvault_d2d
> >> _______________________________________________
> >> cacti-user mailing list
> >> [email protected]
> >> https://lists.sourceforge.net/lists/listinfo/cacti-user
> >>
> >
> ------------------------------------------------------------------------------
> > AlienVault Unified Security Management (USM) platform delivers complete
> > security visibility with the essential security capabilities. Easily and
> > efficiently configure, manage, and operate all of your security controls
> > from a single console and one unified framework. Download a free trial.
> > http://p.sf.net/sfu/alienvault_d2d
> > _______________________________________________
> > cacti-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/cacti-user
> >
>
>
> ------------------------------------------------------------------------------
> AlienVault Unified Security Management (USM) platform delivers complete
> security visibility with the essential security capabilities. Easily and
> efficiently configure, manage, and operate all of your security controls
> from a single console and one unified framework. Download a free trial.
> http://p.sf.net/sfu/alienvault_d2d
> _______________________________________________
> cacti-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/cacti-user
>
------------------------------------------------------------------------------
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities. Easily and
efficiently configure, manage, and operate all of your security controls
from a single console and one unified framework. Download a free trial.
http://p.sf.net/sfu/alienvault_d2d
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.