Re: Graphing Arista Switch Ports

Edit:
It looks like I'm getting some information, this is the output from cmd.php
05/31/2013 03:02:34 PM - SYSTEM STATS: Time:0.1884 Method:cmd.php
Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:1
RRDsProcessed:0
05/31/2013 03:02:35 PM - CMDPHP: Poller[0] Host[9] RECACHE DQ[1] OID:
.1.3.6.1.2.1.1.3.0, output: 1660158173
05/31/2013 03:02:35 PM - CMDPHP: Poller[0] Host[9] DS[93] SNMP: v3: ss1a,
dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.1000045, output: 3560893268
05/31/2013 03:02:35 PM - CMDPHP: Poller[0] Time: 0.0964 s, Theads: N/A,
Hosts: 1

I did a snmpwalk from one of my linux boxes, and greped for 1000045, which
is Port-Channel45 what I'm trying to graph. Here is the output below.

grep -i 1000045 /tmp/fs1a.txt
IF-MIB::ifIndex.1000045 = INTEGER: 1000045
IF-MIB::ifDescr.1000045 = STRING: Port-Channel45
IF-MIB::ifType.1000045 = INTEGER: ieee8023adLag(161)
IF-MIB::ifMtu.1000045 = INTEGER: 1500
IF-MIB::ifSpeed.1000045 = Gauge32: 0
IF-MIB::ifPhysAddress.1000045 = STRING: 0:0:0:0:0:0
IF-MIB::ifAdminStatus.1000045 = INTEGER: up(1)
IF-MIB::ifOperStatus.1000045 = INTEGER: lowerLayerDown(7)
IF-MIB::ifLastChange.1000045 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1000045 = Counter32: 0
IF-MIB::ifInUcastPkts.1000045 = Counter32: 0
IF-MIB::ifInNUcastPkts.1000045 = Counter32: 0
IF-MIB::ifInDiscards.1000045 = Counter32: 0
IF-MIB::ifInErrors.1000045 = Counter32: 0
IF-MIB::ifInUnknownProtos.1000045 = Counter32: 0
IF-MIB::ifOutOctets.1000045 = Counter32: 0
IF-MIB::ifOutUcastPkts.1000045 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1000045 = Counter32: 0
IF-MIB::ifOutDiscards.1000045 = Counter32: 0
IF-MIB::ifOutErrors.1000045 = Counter32: 0
IF-MIB::ifOutQLen.1000045 = Gauge32: 0
IF-MIB::ifSpecific.1000045 = OID: iso.2.840.10006.300.43.1.1
SNMPv2-SMI::mib-2.17.1.4.1.2.149 = INTEGER: 1000045
IF-MIB::ifName.1000045 = STRING: Port-Channel45
IF-MIB::ifInMulticastPkts.1000045 = Counter32: 0
IF-MIB::ifInBroadcastPkts.1000045 = Counter32: 0
IF-MIB::ifOutMulticastPkts.1000045 = Counter32: 0
IF-MIB::ifOutBroadcastPkts.1000045 = Counter32: 0
IF-MIB::ifHCInOctets.1000045 = Counter64: 0
IF-MIB::ifHCInUcastPkts.1000045 = Counter64: 0
IF-MIB::ifHCInMulticastPkts.1000045 = Counter64: 0
IF-MIB::ifHCInBroadcastPkts.1000045 = Counter64: 0
IF-MIB::ifHCOutOctets.1000045 = Counter64: 0
IF-MIB::ifHCOutUcastPkts.1000045 = Counter64: 0
IF-MIB::ifHCOutMulticastPkts.1000045 = Counter64: 0
IF-MIB::ifHCOutBroadcastPkts.1000045 = Counter64: 0
IF-MIB::ifLinkUpDownTrapEnable.1000045 = INTEGER: enabled(1)
IF-MIB::ifHighSpeed.1000045 = Gauge32: 0
IF-MIB::ifPromiscuousMode.1000045 = INTEGER: false(2)
IF-MIB::ifConnectorPresent.1000045 = INTEGER: false(2)
IF-MIB::ifAlias.1000045 = STRING:
IF-MIB::ifCounterDiscontinuityTime.1000045 = Timeticks: (0) 0:00:00.00
IF-MIB::ifStackStatus.0.1000045 = INTEGER: active(1)
IF-MIB::ifStackStatus.1000045.0 = INTEGER: active(1)
SNMPv2-SMI::mib-2.77.1.1.1.1.0.1000045 = INTEGER: 1
SNMPv2-SMI::mib-2.77.1.1.1.1.1000045.0 = INTEGER: 1


On Fri, May 31, 2013 at 2:22 PM, Reza <[email protected]> wrote:

> Hello Cacti Users,
>
> I'm a new user to Cacti and I'm running into some difficulty graphing
> interfaces off of an Arista switch (model DCS-7050S-52). I have created the
> device in Cacti via SNMPv3 and I'm able to see the SNMP data is
> successfully queried via the verbose query link under the device section
> using the Cisco Route host template. I also tried using the ucd/net snmp
> host template without any luck.
>
> To keep it simple I'm just trying to graph one port currently on the
> Arista switch. I took a look at the data source, Port-Channel45, and I can
> see its looking for ifSpeed, ifName, and ifDesc as the index type. I
> verified with the verbose query that these fields do exist and are
> returning data.
>
> I'm not able to figure out currently why no data is being presented to the
> graph. There is a graph image, it is just completely blank.
>
> Any assistance/guidance on this subject would be greatly appreciated. Let
> me know if I need to present additional information.
>
> Thanks,
> -Reza
>
------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite
It's a free troubleshooting tool designed for production
Get down to code-level detail for bottlenecks, with <2% overhead.
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap2