Re: include in pool

Hi Peter,
the include line in your example is commented. I think you will get an
error if you un-comment it :)
Regards
Cédric

Le mar. 9 nov. 2021 à 15:36, Peter Davies <[email protected]>
a écrit :

> Hi Cèdric,
>    Have you tried having each shared-network/subnet in its own include
> file.
> Then include a file with "members of" statements within that?
> ie:
> dhcpd.conf:
>          class "allocation-class-1" {
>          match pick-first-value (option dhcp-client-identifier, hardware);
>        }
>
>        class "allocation-class-2" {
>          match pick-first-value (option dhcp-client-identifier, hardware);
>        }
>
>         allow members of "allocation-class-1";
>         allow members of "allocation-class-1";
>
>        class "allocation-class-1" {
>          match pick-first-value (option dhcp-client-identifier, hardware);
>        }
>
>        class "allocation-class-2" {
>          match pick-first-value (option dhcp-client-identifier, hardware);
>        }
>        subclass "allocation-class-1" 1:8:0:2b:4c:39:ad;
>        subclass "allocation-class-2" 1:8:0:2b:a9:cc:e3;
>        subclass "allocation-class-1" 1:0:0:c4:aa:29:44;
>
>       include "subnet-1.include";
> ...
>
> subnet-1.include:
> shared-network "SN1" {
>   subnet 10.0.0.0 netmask 255.255.255.0 {
>     option routers 10.0.0.1;
>     pool {
>            #include "access-1.include";
>            range 10.0.0.10 10.0.0.254; } }
> }
>
> access-2.include:
> allow members of "allocation-class-1";
> allow members of "allocation-class-2";
>
> This appears to work
>
> Kind Regards Peter
>
>
> ------------------------------
> *From:* dhcp-users <[email protected]> on behalf of
> BASSAGET Cédric <[email protected]>
> *Sent:* 09 November 2021 09:21
> *To:* [email protected] <[email protected]>
> *Subject:* include in pool
>
> Hello.
> I have to configure a dhcp server wich will act as master for dozens of
> relays.
> My basic pool config includes a lot of "allow members of" statements, like
> this :
>
>
> subnet 192.168.2.0 netmask 255.255.255.0 {
>     option routers 192.168.2.1;
>     #option domain-name-servers 192.168.2.1;
>     #option bootfile-name = "snom821.htm";
>     pool {
>         range 192.168.2.100 192.168.2.200;
>         ### Assign who is going to use this pool
>         allow members of "voip-mac-address-prefix";
>         # allow localhost for NRPE
>         # allow members of "localhost";
>         # Aastra
>         allow members of "Aastra6730i";
>         allow members of "Aastra6731i";
>         allow members of "Aastra6739i";
>         allow members of "Aastra6751i";
>         allow members of "Aastra6753i";
>         allow members of "Aastra6755i";
>         allow members of "Aastra6757i";
>         # Snom
>         allow members of "Snom300";
>         allow members of "Snom320";
>         allow members of "Snom360";
>         allow members of "Snom370";
>         allow members of "Snom820";
>        ....
>      }
> }
>
> As I have to create dozens of pools, I tried to put all these "allow
> members of ..." in a file called "allowed_members.include", and replace my
> pool def by :
>
> subnet 192.168.2.0 netmask 255.255.255.0 {
>     option routers 192.168.2.1;
>     pool {
>         include "path/to/allowed_members.include";
>     }
> }
>
>
> but it does not work, it throws a config error when testing config.
>
> So my questions are :
> - is there a way to do an "include" inside a pool ?
> - is there another way to declare multiple pools for each relay ? (all
> relays will have the same config)
>
> The aim of this is to have a small and comprehensible dhcpd.conf file.
>
>
> Regards,
> Cédric
>
> _______________________________________________
> ISC funds the development of this software with paid support
> subscriptions. Contact us at https://www.isc.org/contact/ for more
> information.
>
> dhcp-users mailing list
> [email protected]
> https://lists.isc.org/mailman/listinfo/dhcp-users
>

_______________________________________________
ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.

dhcp-users mailing list
[email protected]
https://lists.isc.org/mailman/listinfo/dhcp-users