Re: Replacing DNS servers

Yoiu don't have to be the 'technical contact' to do this.  That is
just a somewhat
traditional and in some cases superfluous role separation.  Just as long as the
domain is not locked ( in the case of OpenSRS the Reseller can change this
status ), and you have administrative access,  the changes will work.

Chris.

2009/2/23 Max Clark <[email protected]>:
> Possible if you are listed as the technical contact for all of the
> domain names that you would like to change. Not possible if you don't
> have permission to update the zones.
>
> The easiest way would be to update the records for
> ns1.totallogic.com,ns2.totallogic.com to your new IP addresses and
> update everything in one shot.
>
> -Max
>
> On Fri, Feb 20, 2009 at 11:17 AM, DAve <[email protected]> wrote:
>> Good afternoon,
>>
>> I am still in the process of replacing my Bind servers with DJBDNS. I have
>> all new replacement servers up and several hundred domains have been moved
>> with a bit over 100 more to go.
>>
>> Unfortunately this has been going very very slowly so I have taken back the
>> project and I am trying to push it forward at a faster rate.
>>
>> Question, does anyone know of a way to bulk change "Name Server" values at a
>> registrar? I tried to talk to NetSol and Register about this but they either
>> don't seem to understand what I am asking, or do not see the need to do so.
>>
>> I would like to remove the following,
>>
>> ns1.totallogic.com,ns2.totallogic.com
>>
>> and replace them with,
>>
>> ns1auth.tls.net, ns2auth.tls.net, ns3auth.tls.net
>>
>> across the board, all domains, everywhere. Seems this should be possible,
>> but I am unable to discover a method to do so.
>>
>> Thanks,
>>
>> DAve
>> --
>> "Posterity, you will know how much it cost the present generation to
>> preserve your freedom.  I hope you will make good use of it.  If you
>> do not, I shall repent in heaven that ever I took half the pains to
>> preserve it." John Quincy Adams
>>
>> http://appleseedinfo.org
>>
>>
>