Re: How to config pdns to send notification to addres not in "IN NS" record.

Bino Oetomo via Pdns-users <[email protected]>
Newsgroups gmane.network.dns.powerdns.user
Message-ID <CAEyeCpNxZ923qHKy51evLUxqQeE7FCYVk0KmEEyoiJxPSvM+cQ@mail.gmail.com>
On Tue, Mar 12, 2024 at 5:58 PM Brian Candler <[email protected]> wrote:

> On 12/03/2024 10:41, Bino Oetomo via Pdns-users wrote:
> > dear all
> >
> > I have a cpanel box with powerdns as it's DNS server. it's IP address
> > is 192.168.1.101
> >
> ...
> >
> > zone "domain0.bino" {
> > type secondary;
> > file "/var/named/domain0.bino.db";
> > primaries {103.30.144.60;};
> > };
> >
> 103.30.144.60 != 192.168.1.101
>
> If the powerDNS and bind boxes are behind NAT without VPN tunnels
> between them, then this is going to cause you problems (e.g.
> 192.168.1.101 may not be able to send to 192.168.8.79)
>
> You can use tcpdump at both ends to see if notifications are being sent
> from the primary, and if they are, whether they are being received by
> the secondary.
>
>
Dear Brian.
I Really appreciate your help

I changed it to 192.168.1.101, still there is no notification received at
the slave.

I run --> tcpdump -vv --interface eth1 port 53 at powerdns box , got no
traffic indicating notification sent.
But when I restart the bind9 service at the slave, tcpdump shows some
traffic to and from slave.

So still IMHO my pdns box did not send any notification to slaves.

Sincerely
-bino-

_______________________________________________
Pdns-users mailing list
[email protected]
https://mailman.powerdns.com/mailman/listinfo/pdns-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.