Selecting boot adapter

Thanks for your help.

IS there anyway to specify which NIC to use as the boot adapter. The
machines I'm booting have two, dual port NICs (same hardware/drivers -
e1express). When I installed the iSCSI initiator (win2003) I selected
one of the ports to set as the boot device. Now that it is installed, I
would like to use a different port, but I've been unable to get it to
boot (stops with 0x0000007B). Any help/ideas would be great.

I've tried reinstalling iscsi initiator and selecting appropriate port.
I also ran iscsibcg /verify/fix and everything looked fine. 

I managed to switch ports in XP, using sanbootcfg. Can I use sanbootcfg
on Win2003? Would I have to remove the MS boot support?

Thanks
Joe Wagnell

-----Original Message-----
From: Michael Brown [mailto:[email protected]] 
Sent: Sunday, August 02, 2009 2:06 PM
To: [email protected]
Cc: Wagnell, Joseph M (IS)
Subject: Re: [Etherboot-discuss] Password protect the gPXE CLI

On Friday 31 July 2009 17:28:57 Wagnell, Joseph M (IS) wrote:
> I was wondering if it was possible to password protect the CLI access
to
> gPXE. Or if that's not possible, could I remove access to the CLI
> altogether. I am currently using gPXE to sanboot multiple
computers/OS's
> (with DHCP) and security wants to ensure that a user cannot manually
> assign an IP and boot from a different LUN. Any other
> thoughts/suggestions would be welcome.

If you change BANNER_TIMEOUT in config/general.h from 20 down to 0, then
you 
will never see a prompt to enter the CLI.  This will also disable the 
POST-time prompt to enter the CLI, if you are building gPXE into ROM.

Michael

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july