Re: Wireless
"Peter Meyer" <[email protected]> Sun, 29 Nov 2009 11:46:32 +0100
| Newsgroups | gmane.network.etherboot.user |
|---|---|
| Message-ID | <[email protected]> |
Quoting Joshua Oreman :
> WLAN is configured to support 802.11n and max speed 300Mbit/s. I'll change this
> settings to 802.11b+g and try it again. There was something about 802.11n
> at the Etherboot-Wiki.
>
> The 802.11n could explain it. In many jurisdictions, transmissions on
> the 5.4GHz band have to use "spectrum management" checking to make
> sure they're not interfering with radar signals and such. 802.11b/g
> uses 2.4GHz, which usually doesn't have such issues.
>
> It's also possible gPXE is being overzealous here, and that since we
> use 802.11g, the router would let us connect without spectrum
> management even though it supports it. You can remove lines 1028-1032
> from gPXE src/net/80211/net80211.c:
>
> if ( capab & IEEE80211_CAPAB_SPECTRUM_MGMT ) {
> DBGC ( dev, "802.11 %p cannot handle spectrum managed "
> "network\n", dev );
> return -ENOSYS;
> }
>
> and see if it works. If so, please let me know so I can submit this as a
> patch.
>
> -- Josh
>
Hi Josh,
i commented 'return -ENOSYS;' and it runs a little bit futher but it still doesn't work.
gPXE> dhcp net0
Waiting for link-up on net0...
802.11 0xa0d7c found network ME (00:1f:3f:17:49:5e)
802.11 0xa0d7c authenticating with method 0
802.11 0xa0d7c spectrum managed network detected. Maybe it wont work.
802.11 0xa0d7c setting country regulations for DE
802.11 0xa0d7c association failed (state=0100): Not supported (0x3c266003)
It seems that 'net80211_step_associate' fail.
What does 'Not supported' mean?
How is the errorcode to read/split?
With best regards
Peter
------------------------------------------------------------------------------------
XMail.net Communications Center
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july