Is multipath supported in gPXE iSCSI boot in Windows?
Sonny Li <[email protected]> Wed, 28 Apr 2010 01:10:56 +0000
| Newsgroups | gmane.network.etherboot.user |
|---|---|
| Message-ID | <EBEE9A014361D546AAC41CCAB29789E951B0E30B@TK5EX14MBXC130.redmond.corp.microsoft.com> |
Have done some search, but don't get the suitable results. So ask here: Situation: iSCSI initiator machine has two NICs with separated IP address, Init_ipA and init_ipB iSCSI Target machine also has two NICs with separated IP address, target_ipA and target_ipB question: Is it possible to set the following and how to setup them Init_ipA gpxe iSCSI connect to target_ipA for iSCSI boot as primary path Init_ipA gpxe iSCSI connect to target_ipA for iSCSI boot as secondary path So if primary path is down, secondary path can take it over to continue for iSCSI boot. I have tried for Hardware NICs (like Intel PCI-E). they can support above situation, but not sure for gPXE iSCSI boot. Thanks Sonny ------------------------------------------------------------------------------ _______________________________________________ Etherboot-discuss mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/etherboot-discuss