Re: Hardware requirements

On 03/03/14 13:05, Sebas Pedersen wrote:
> On 03-03-2014 07:55 AM, Spamme wrote:
>> On Mon, 2014-03-03 at 02:19 -0300, Sebas Pedersen wrote:
>>> On 02-03-2014 10:21 PM, Dennis New wrote:
>>> > On Sun, 02 Mar 2014 11:25:41 -0300, Sebas Pedersen wrote:
>>> >> Hi all.
>>> >>
>>> >> I'm considering in running a Freenet node, but I don't have much
>>> >> resources. That's why I'll to ask you guys if it's possible to run a
>>> >> Freenet node in a dedicated server PIII with 512MB RAM.
>>> >> Any comments or suggestions about minimun and desirable hardware
>>> >> requiriments are welcome!
>>> >
>>> > That should be enough. I run it with 300 or 400 megs. Of course,
>>> > that'll only leave you with about 100 for the rest of your daemons,
>>> > which should be enough if you don't run a graphical environment
>>> (X) or
>>> > any other large processes.
>>>
>>> OK, thanks a lot. Yes I don't run a graphical enviroment, and it
>>> will be
>>> a Freenet dedicated server, so no other large processes.
>>> Any suggestions in the amount of disk space destinated to Freenet?
>>>
>>> Thanks in advance.
>>> Sebas
>>>
>> As much as possible, It will go with a gig or less but if you want to
>> help the network then id say give it as much as you can afford.
>> Be aware that resizing the datastore can result in data loss, so try not
>> to change it to often
>
> Yes, that's my idea, to give as much as disk space as possible. I make
> the question because I thought it could be a relationship between the
> amount of disk space and the consumption of RAM (for example 40 GiB
> not recommended dor 512 MiB of RAM).
There is, yes. The setup wizard will use this when recommending the
default store size when you install.

Technically: 4 bytes per slot in RAM, three slots for ~ each 35KB
(32KB+~300 bytes + 1K + 1K + 1K).
>
> Thanks again.

_______________________________________________
Support mailing list
[email protected]
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-request-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@public.gmane.org?subject=unsubscribe

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
Comment: Using GnuPG with Icedove - http://www.enigmail.net/
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=aNJ0
-----END PGP SIGNATURE-----