Re: Newbie can't log into his own wu-ftpd server from PowerBook G4 (Mac OS X 10.2.8)
Phillip Pi <[email protected]> Sun, 13 Feb 2005 14:22:52 -0800 (PST)
| Newsgroups | gmane.network.ftp.wuftpd.user |
|---|---|
| Message-ID | <[email protected]> |
Ted, I just tested this and you're right! It did work (connected to wu-ftpd server so fast -- woah) when Debian was connected to the Internet. I also had to disable Guarddog (firewall) because it was blocking incoming FTP access (have not configured it for LAN and will deal with it later) -- disabled mode still had that long pause earlier without dial-up. So now what? Do I really need run a domain server? Isn't there a configuration to have wu-ftpd ignore domain look up? I don't care about looking up who and who server. I just want connections with IP addresses. /etc/hosts has the server names I gave (e.g., ANTian-AXP). What's the best way? Again, newbie here... -- "I look at an ant and I see myself: a native South African, endowed by nature with a strength much greater than my size so I might cope with the weight of a racism that crushes my spirit." --Miriam Makeba /\___/\ / /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx and | |o o| | Ant's Quality Foraged Links: http://aqfl.net \ _ / E-mail: [email protected] or [email protected] ( ) On Sun, 13 Feb 2005, Ted Keller wrote: > To test.... connect your dialup - point to you ISP's DNS servers - and > attempt your connections. It's ok that it doesn't resolve - just that the > wu-ftpd gets an answer within a reasonable time. That will confirm the > theory. > > There are a number of devices that can operate as a DNS server. Setting > it up isn't difficult... but will take some effort. > > On Sun, 13 Feb 2005, Phillip Pi wrote: > > > Ted, how would I configure that on a LAN? Do I really need a DNS server? > > It is only three computers on the LAN. I did not compile wu-ftpd from > > source. I got it from Debian's apt-get install command. Is there a > > configuration file to edit? Again, I am new to this Linux stuff. > > > > On Sun, 13 Feb 2005, Ted Keller wrote: > > > > > Phillip, > > > > > > This sounds like a DNS timeout issue. The ftp daemon issues a dns request > > > to determine the domain of the connecting machine. If no dns is > > > available, it waits until the dns timeout process has occured (30 seconds) > > > then continues to proces the request. Your G4 client may have timers in > > > it that are faster than the 30 second limit. > > > > > > Options... > > > > > > install some local dns server on your ftp unit. > > > point to a valid ftp unit. > > > recomplie ftpd without dns support. > > > > > > ted keller > > > > > > > > > On Sun, 13 Feb 2005, Phillip Pi wrote: > > > > > > > Hello! > > > > > > > > I am a newbie with Linux (Debian v3.1; Sarge installer; Kernel 2.6.8), and > > > > I seem to have troubles getting into my wu-ftpd v2.6.2(1) [from apt-get] > > > > server remotely on a LAN (not used for Internet since I am on a measly > > > > dial-up connection). It used to work in the past (two weeks ago or more) > > > > even after a few minutes of waiting. I am not sure what caused this > > > > problem. I tried both the standalone daemon and inetd setup for wu-ftpd, > > > > but they resulted the same. > > > > > > > > Example: > > > > $ ftp ANTian-AXP (also tried 192.168.0.220 IP address) > > > > > > > > Connected to ANTian-AXP. > > > > > > > > <<a long pause for a few minutes>> > > > > > > > > 421 Service is not available, remote server timed out. Connection closed. > > > > > > > > > > > > I wonder if the long pauses are causing PowerBook G4 to time out/give up? > > > > In Windows XP Professional SP2, ftp connection is a couple minutes and > > > > eventually lets me log in. Even ftp to localhost, on the Debian box > > > > running wu-ftpd, takes too long (a few minutes) but it is fine once I am > > > > logged in the FTP server. Maybe I misconfigured something on the Debian > > > > box? > > > > > > > > > > > > In /var/log/messsages, I see (within the same second) from my PowerBook > > > > G4: > > > > > > > > localhost wu-ftpd[3821]: connection from 192.168.0.28 [192.168.0.28] > > > > localhost wu-ftpd[3821]: lost connection to 192.178.0.28 [192.168.0.28] > > > > localhost wu-ftpd[3821]: FTP session closed > > > > > > > > > > > > I am not sure if this is related. I can ssh (have to wait about 25-30 > > > > seconds) from PowerBook G4's ssh -2 -C command; SecureCRT v3.4.8 was > > > > instant) and ping to this Debian box without problems. > > > > > > > > Any ideas on what's going on? Thank you in advance. :)