Re: About GNUrl and cURL

"Schanzenbach, Martin" <[email protected]> Tue, 6 Sep 2022 16:48:02 +0000
Newsgroups	gmane.network.gnunet.devel
Message-ID	<[email protected]>

> On 6. Sep 2022, at 15:03, madmurphy <[email protected]> wrote:
> 
> Okay, the first thing I notice in the list of the files installed by libcurl-gnutls is that there is no libcurl-gnutls.pc file. Do you think there is a way to check without passing through pkgconf?
> 

I am pretty sure we do not use pkgconf.
I tested this locally by copying my libcurl.so* files to libcurl-gnutls.so* and it was detected correctly.
So this is odd.
I can investigate here, maybe check your config.log again to see what is going on. You should see a check that tries to link a binary against libcurl-gnutls.

BR

> 
> On Tue, Sep 6, 2022 at 1:47 PM madmurphy <[email protected]> wrote:
> I will try to check the configure.ac file. I don't get an error btw, only that "curl-openssl" http client...
> 
> On Tue, Sep 6, 2022 at 1:45 PM Schanzenbach, Martin <[email protected]> wrote:
> Yes. I *think* I have found a better way to check for this and it should be compatible with debian as well.
> 
> BR
> 
> > On 6. Sep 2022, at 12:32, madmurphy <[email protected]> wrote:
> >
> > Hi Martin,
> >
> > If "normal" curl is found, the check for curl-gnutls is skipped.
> > I guess we should prefer curl-gnutls.
> > Yes, libcurl-gnutls should be checked first. Also because apparently Arch is not the only distro that has a split package of cURL linked against GNU TLS…
> >
> > --madmurphy
> >
> >
> > On Tue, Sep 6, 2022 at 9:59 AM Schanzenbach, Martin <[email protected]> wrote:
> > Ah sorry I just checked:
> > If "normal" curl is found, the check for curl-gnutls is skipped.
> > I guess we should prefer curl-gnutls.
> >
> > Br
> >
> > > On 6. Sep 2022, at 10:51, Schanzenbach, Martin <[email protected]> wrote:
> > >
> > > Hi,
> > >
> > > check your config.log and check for the test against libcurl-gnutls.
> > > There should be test somewhere in there that fails for reasons.
> > >
> > > BR
> > > Martin
> > >
> > >> On 5. Sep 2022, at 20:21, madmurphy <[email protected]> wrote:
> > >>
> > >> Hi Christian,
> > >>
> > >> I tried to run ./configure twice. The first time I had installed on my machine curl (which is linked against openssl) and gnurl, but I did not have libcurl-gnutls installed. Under these conditions at the end of the configure script I got printed:
> > >>
> > >> ...
> > >> HTTP Client:                    gnurl
> > >> ...
> > >>
> > >> The second time I had curl and libcurl-gnutls installed, but gnurl was not installed. Under these conditions at the end of the configure script I got printed:
> > >>
> > >> ...
> > >> HTTP Client:                    curl-openssl
> > >> ...
> > >>
> > >> For some reasons in the second scenario the configure script sees the curl package but does not see libcurl-gnutls and so the latter is not used (I guess). The files shipped by the latter are:
> > >>
> > >> /usr/
> > >> /usr/lib/
> > >> /usr/lib/libcurl-gnutls.so.3
> > >> /usr/lib/libcurl-gnutls.so.4
> > >> /usr/lib/libcurl-gnutls.so.4.0.0
> > >> /usr/lib/libcurl-gnutls.so.4.1.0
> > >> /usr/lib/libcurl-gnutls.so.4.2.0
> > >> /usr/lib/libcurl-gnutls.so.4.3.0
> > >> /usr/lib/libcurl-gnutls.so.4.4.0
> > >> /usr/lib/libcurl-gnutls.so.4.5.0
> > >> /usr/lib/libcurl-gnutls.so.4.6.0
> > >> /usr/lib/libcurl-gnutls.so.4.7.0
> > >> /usr/lib/libcurl-gnutls.so.4.8.0
> > >> /usr/share/
> > >> /usr/share/licenses/
> > >> /usr/share/licenses/libcurl-gnutls
> > >>
> > >> How can we ensure that the configure script correctly sees the libcurl-gnutls package?
> > >>
> > >> I paste below both complete outputs.
> > >>
> > >> Installed: curl, gnurl
> > >> Not installed: libcurl-gnutls:
> > >>
> > >> $ ./configure
> > >> checking build system type... x86_64-pc-linux-gnu
> > >> checking host system type... x86_64-pc-linux-gnu
> > >> checking target system type... x86_64-pc-linux-gnu
> > >> checking for a BSD-compatible install... /usr/bin/install -c
> > >> checking whether build environment is sane... yes
> > >> checking for a race-free mkdir -p... /usr/bin/mkdir -p
> > >> checking for gawk... gawk
> > >> checking whether make sets $(MAKE)... yes
> > >> checking whether make supports nested variables... yes
> > >> checking whether UID '1000' is supported by ustar format... yes
> > >> checking whether GID '1000' is supported by ustar format... yes
> > >> checking how to create a ustar tar archive... gnutar
> > >> checking whether make supports nested variables... (cached) yes
> > >> checking for gawk... (cached) gawk
> > >> checking for gcc... gcc
> > >> checking whether the C compiler works... yes
> > >> checking for C compiler default output file name... a.out
> > >> checking for suffix of executables...
> > >> checking whether we are cross compiling... no
> > >> checking for suffix of object files... o
> > >> checking whether the compiler supports GNU C... yes
> > >> checking whether gcc accepts -g... yes
> > >> checking for gcc option to enable C11 features... none needed
> > >> checking whether gcc understands -c and -o together... yes
> > >> checking whether make supports the include directive... yes (GNU style)
> > >> checking dependency style of gcc... gcc3
> > >> checking whether gcc and cc understand -c and -o together... yes
> > >> checking whether ln -s works... yes
> > >> checking whether make sets $(MAKE)... (cached) yes
> > >> checking for pkg-config... /usr/bin/pkg-config
> > >> checking pkg-config is at least version 0.29.2... yes
> > >> checking how to print strings... printf
> > >> checking for a sed that does not truncate output... /usr/bin/sed
> > >> checking for grep that handles long lines and -e... /usr/bin/grep
> > >> checking for egrep... /usr/bin/grep -E
> > >> checking for fgrep... /usr/bin/grep -F
> > >> checking for ld used by gcc... /usr/bin/ld
> > >> checking if the linker (/usr/bin/ld) is GNU ld... yes
> > >> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
> > >> checking the name lister (/usr/bin/nm -B) interface... BSD nm
> > >> checking the maximum length of command line arguments... 1572864
> > >> checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
> > >> checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
> > >> checking for /usr/bin/ld option to reload object files... -r
> > >> checking for file... file
> > >> checking for objdump... objdump
> > >> checking how to recognize dependent libraries... pass_all
> > >> checking for dlltool... no
> > >> checking how to associate runtime and link libraries... printf %s\n
> > >> checking for ar... ar
> > >> checking for archiver @FILE support... @
> > >> checking for strip... strip
> > >> checking for ranlib... ranlib
> > >> checking command to parse /usr/bin/nm -B output from gcc object... ok
> > >> checking for sysroot... no
> > >> checking for a working dd... /usr/bin/dd
> > >> checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
> > >> checking for mt... no
> > >> checking if : is a manifest tool... no
> > >> checking for stdio.h... yes
> > >> checking for stdlib.h... yes
> > >> checking for string.h... yes
> > >> checking for inttypes.h... yes
> > >> checking for stdint.h... yes
> > >> checking for strings.h... yes
> > >> checking for sys/stat.h... yes
> > >> checking for sys/types.h... yes
> > >> checking for unistd.h... yes
> > >> checking for vfork.h... no
> > >> checking for dlfcn.h... yes
> > >> checking for objdir... .libs
> > >> checking if gcc supports -fno-rtti -fno-exceptions... no
> > >> checking for gcc option to produce PIC... -fPIC -DPIC
> > >> checking if gcc PIC flag -fPIC -DPIC works... yes
> > >> checking if gcc static flag -static works... yes
> > >> checking if gcc supports -c -o file.o... yes
> > >> checking if gcc supports -c -o file.o... (cached) yes
> > >> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
> > >> checking whether -lc should be explicitly linked in... no
> > >> checking dynamic linker characteristics... GNU/Linux ld.so
> > >> checking how to hardcode library paths into programs... immediate
> > >> checking for shl_load... no
> > >> checking for shl_load in -ldld... no
> > >> checking for dlopen... yes
> > >> checking whether a program can dlopen itself... yes
> > >> checking whether a statically linked program can dlopen itself... no
> > >> checking whether stripping libraries is possible... yes
> > >> checking if libtool supports shared libraries... yes
> > >> checking whether to build shared libraries... yes
> > >> checking whether to build static libraries... no
> > >> checking for special C compiler options needed for large files... no
> > >> checking for _FILE_OFFSET_BITS value needed for large files... no
> > >> checking for _LARGEFILE_SOURCE value needed for large files... no
> > >> checking whether unaligned 64-bit access works... yes
> > >> checking if gcc supports -fno-strict-aliasing... yes
> > >> checking if gcc supports -Wno-address-of-packed-member... yes
> > >> checking if gcc supports -Wno-tautological-constant-out-of-range-compare... no
> > >> checking how to run the C preprocessor... gcc -E
> > >> checking for X... libraries , headers
> > >> checking for gethostbyname... yes
> > >> checking for connect... yes
> > >> checking for remove... yes
> > >> checking for shmat... yes
> > >> checking for IceConnectionNumber in -lICE... yes
> > >> checking for build target... linux
> > >> checking for library containing gethostbyname... none required
> > >> checking for library containing memchr... none required
> > >> checking for library containing memset_s... no
> > >> checking for library containing explicit_bzero... none required
> > >> checking for socket in -lsocket... no
> > >> checking for log in -lm... yes
> > >> checking for getloadavg... yes
> > >> checking for getopt... true
> > >> checking for pkgconf... /usr/bin/pkg-config
> > >> checking for ssh... true
> > >> checking for SSH key... no
> > >> checking for a Python interpreter with version >= 3.4... python
> > >> checking for python... /usr/bin/python
> > >> checking for python version... 3.10
> > >> checking for python platform... linux
> > >> checking for GNU default python prefix... ${prefix}
> > >> checking for GNU default python exec_prefix... ${exec_prefix}
> > >> checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.10/site-packages
> > >> checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.10/site-packages
> > >> checking for perl... /usr/bin/perl
> > >> checking for pdflatex... pdflatex
> > >> checking for the TikZ package for LaTeX... yes
> > >> checking for pdflatex... (cached) pdflatex
> > >> checking for the QR Code package for LaTeX... no
> > >> checking for pdflatex... (cached) pdflatex
> > >> checking for the Labels package for LaTeX... yes
> > >> checking for -iptables... no
> > >> checking for iptables... /usr/bin/iptables
> > >> checking for -ip6tables... no
> > >> checking for ip6tables... /usr/bin/ip6tables
> > >> checking for -ip... no
> > >> checking for ip... /usr/bin/ip
> > >> checking for -ifconfig... no
> > >> checking for ifconfig... /usr/bin/ifconfig
> > >> checking for adduser... false
> > >> checking for -sysctl... no
> > >> checking for sysctl... /usr/bin/sysctl
> > >> checking for -upnpc... no
> > >> checking for upnpc... /usr/bin/upnpc
> > >> checking for checkbashisms... no
> > >> checking for checkbashisms.pl... no
> > >> checking for uncrustify... false
> > >> checking for yapf... no
> > >> checking for struct tm.tm_gmtoff... yes
> > >> checking for getaddrinfo_a in -lanl... yes
> > >> checking for libgcrypt-config... /usr/bin/libgcrypt-config
> > >> checking for LIBGCRYPT - version >= 1.6.0... yes (1.10.1-unknown)
> > >> checking LIBGCRYPT API version... okay
> > >> checking for gcc options needed to detect all undeclared functions... none needed
> > >> checking whether gcry_mpi_set_opaque_copy is declared... yes
> > >> checking for if_tun.h... no
> > >> checking for linux/if_tun.h... yes
> > >> checking whether struct in6_ifreq is declared... no
> > >> checking for sphinx-build... true
> > >> checking for mandoc... no
> > >> checking for a working HMAC... yes
> > >> checking for static assertion support... yes
> > >> checking for bluetooth/bluetooth.h... yes
> > >> checking for ba2str in -lbluetooth... yes
> > >> checking for zbar.h... yes
> > >> checking for zbar_processor_create in -lzbar... yes
> > >> checking for png.h... yes
> > >> checking for png_create_read_struct in -lpng... yes
> > >> checking for pabc/pabc.h... yes
> > >> checking for pabc_new_ctx in -lpabc... no
> > >> checking for jansson.h... yes
> > >> checking for json_loads in -ljansson... yes
> > >> checking for jose/jose.h... yes
> > >> checking for jose_jwk_gen in -ljose... yes
> > >> checking for pulse/simple.h... yes
> > >> checking for pa_stream_peek in -lpulse... yes
> > >> checking for opus/opus.h... yes
> > >> checking for opus_decode_float in -lopus... yes
> > >> checking for ogg/ogg.h... yes
> > >> checking for ogg_stream_flush_fill in -logg... yes
> > >> checking for GST... yes
> > >> checking for conversation feature set to build... pulse
> > >> checking for gawk... (cached) gawk
> > >> checking for gnurl-config... /usr/bin/gnurl-config
> > >> checking for the version of libgnurl... 7.72.0
> > >> checking for libgnurl >= version 7.34.0... yes
> > >> checking whether libgnurl is usable... yes
> > >> checking for curl_free... yes
> > >> checking for library containing __atomic_load_8... -latomic
> > >> checking for nss.h... yes
> > >> checking whether NSS_STATUS_UNAVAIL is declared... yes
> > >> checking for kvm_open in -lkvm... no
> > >> checking for kstat_open in -lkstat... no
> > >> checking for sodium.h... yes
> > >> checking for crypto_core_ed25519_scalar_mul in -lsodium... yes
> > >> checking for extractor.h... yes
> > >> checking for EXTRACTOR_plugin_add_defaults in -lextractor... yes
> > >> checking for ltdl.h... yes
> > >> checking for lt_dlopenext in -lltdl... yes
> > >> checking for idn2.h... yes
> > >> checking for idn2_to_unicode_8z8z in -lidn2... yes
> > >> checking for zlib.h... yes
> > >> checking for compress2 in -lz... yes
> > >> checking for ld used by gcc... /usr/bin/ld -m elf_x86_64
> > >> checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
> > >> checking for shared library run path origin... done
> > >> checking for iconv... yes
> > >> checking for working iconv... yes
> > >> checking for iconv declaration...
> > >>         extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
> > >> checking for libunistring... yes
> > >> checking how to link with libunistring... /usr/lib/libunistring.so
> > >> checking for libunistring version... 1.0.0
> > >> checking for sqlite3.h... yes
> > >> checking for sqlite3_open in -lsqlite3... yes
> > >> checking for pkg-config... (cached) /usr/bin/pkg-config
> > >> checking pkg-config is at least version 0.9.0... yes
> > >> checking for the PostgreSQL libraries CPPFLAGS...
> > >> checking for the PostgreSQL libraries LDFLAGS...
> > >> checking for the PostgreSQL libraries LIBS... -lpq
> > >> checking for the PostgreSQL version... 14.5
> > >> checking for libpq-fe.h... yes
> > >> checking for the PostgreSQL library linking is working... yes
> > >> checking for libpq-fe.h... (cached) yes
> > >> checking for mysql_init in -lmysqlclient... no
> > >> checking for MHD... yes
> > >> checking for gnutls/abstract.h... yes
> > >> checking for gnutls_priority_set in -lgnutls... yes
> > >> checking for gnutls/dane.h... no
> > >> checking for dirent.h that defines DIR... yes
> > >> checking for library containing opendir... none required
> > >> checking for fcntl.h... yes
> > >> checking for math.h... yes
> > >> checking for errno.h... yes
> > >> checking for ctype.h... yes
> > >> checking for limits.h... yes
> > >> checking for stdarg.h... yes
> > >> checking for signal.h... yes
> > >> checking for locale.h... yes
> > >> checking for stdatomic.h... yes
> > >> checking for malloc.h... yes
> > >> checking for malloc/malloc.h... no
> > >> checking for malloc/malloc_np.h... no
> > >> checking for langinfo.h... yes
> > >> checking for sys/param.h... yes
> > >> checking for sys/mount.h... yes
> > >> checking for sys/statvfs.h... yes
> > >> checking for sys/select.h... yes
> > >> checking for sockLib.h... no
> > >> checking for sys/mman.h... yes
> > >> checking for sys/msg.h... yes
> > >> checking for sys/vfs.h... yes
> > >> checking for arpa/inet.h... yes
> > >> checking for libintl.h... yes
> > >> checking for netdb.h... yes
> > >> checking for netinet/in.h... yes
> > >> checking for sys/ioctl.h... yes
> > >> checking for sys/socket.h... yes
> > >> checking for sys/time.h... yes
> > >> checking for sys/sysinfo.h... yes
> > >> checking for sys/file.h... yes
> > >> checking for sys/resource.h... yes
> > >> checking for ifaddrs.h... yes
> > >> checking for mach/mach.h... no
> > >> checking for sys/timeb.h... yes
> > >> checking for argz.h... yes
> > >> checking for ucred.h... no
> > >> checking for sys/ucred.h... no
> > >> checking for endian.h... yes
> > >> checking for sys/endian.h... no
> > >> checking for execinfo.h... yes
> > >> checking for byteswap.h... yes
> > >> checking whether NLS is requested... yes
> > >> checking for msgfmt... /usr/bin/msgfmt
> > >> checking for gmsgfmt... /usr/bin/msgfmt
> > >> checking for xgettext... /usr/bin/xgettext
> > >> checking for msgmerge... /usr/bin/msgmerge
> > >> checking for CFPreferencesCopyAppValue... no
> > >> checking for CFLocaleCopyCurrent... no
> > >> checking for GNU gettext in libc... yes
> > >> checking whether to use NLS... yes
> > >> checking where the gettext function comes from... libc
> > >> checking for pid_t... yes
> > >> checking for size_t... yes
> > >> checking for mode_t... yes
> > >> checking whether stat file-mode macros are broken... no
> > >> checking for _Bool... yes
> > >> checking for stdbool.h that conforms to C99... yes
> > >> checking whether struct tm is in sys/time.h or time.h... time.h
> > >> checking for struct sockaddr_in.sin_len... no
> > >> checking for struct sockaddr_un.sun_len... no
> > >> checking for off_t... yes
> > >> checking for uid_t in sys/types.h... yes
> > >> checking for fork... yes
> > >> checking for vfork... yes
> > >> checking for working fork... yes
> > >> checking for working vfork... (cached) yes
> > >> checking for working chown... yes
> > >> checking for atoll... yes
> > >> checking for stat64... yes
> > >> checking for strnlen... yes
> > >> checking for mremap... yes
> > >> checking for getrlimit... yes
> > >> checking for setrlimit... yes
> > >> checking for sysconf... yes
> > >> checking for initgroups... yes
> > >> checking for strndup... yes
> > >> checking for gethostbyname2... yes
> > >> checking for getpeerucred... no
> > >> checking for getpeereid... no
> > >> checking for setresuid... yes
> > >> checking for getifaddrs... yes
> > >> checking for freeifaddrs... yes
> > >> checking for getresgid... yes
> > >> checking for mallinfo2... yes
> > >> checking for malloc_size... no
> > >> checking for malloc_usable_size... yes
> > >> checking for getrusage... yes
> > >> checking for random... yes
> > >> checking for srandom... yes
> > >> checking for stat... yes
> > >> checking for statfs... yes
> > >> checking for statvfs... yes
> > >> checking for wait4... yes
> > >> checking for timegm... yes
> > >> checking for sudo... sudo
> > >> checking for doas... no
> > >> checking if __thread is supported... yes
> > >> checking for git... /usr/bin/git
> > >> checking if source is under a VCS... no
> > >> checking that generated files are newer than configure... done
> > >> configure: creating ./config.status
> > >> config.status: creating Makefile
> > >> config.status: creating bin/Makefile
> > >> config.status: creating contrib/Makefile
> > >> config.status: creating contrib/hellos/Makefile
> > >> config.status: creating contrib/services/Makefile
> > >> config.status: creating contrib/services/openrc/Makefile
> > >> config.status: creating contrib/services/systemd/Makefile
> > >> config.status: creating contrib/scripts/Makefile
> > >> config.status: creating contrib/scripts/gnunet-logread/Makefile
> > >> config.status: creating doc/Makefile
> > >> config.status: creating doc/man/Makefile
> > >> config.status: creating doc/doxygen/Makefile
> > >> config.status: creating m4/Makefile
> > >> config.status: creating po/Makefile.in
> > >> config.status: creating src/Makefile
> > >> config.status: creating src/arm/Makefile
> > >> config.status: creating src/arm/arm.conf
> > >> config.status: creating src/ats/Makefile
> > >> config.status: creating src/ats/ats.conf
> > >> config.status: creating src/ats-tool/Makefile
> > >> config.status: creating src/auction/Makefile
> > >> config.status: creating src/block/Makefile
> > >> config.status: creating src/cadet/Makefile
> > >> config.status: creating src/cadet/cadet.conf
> > >> config.status: creating src/core/Makefile
> > >> config.status: creating src/core/core.conf
> > >> config.status: creating src/consensus/Makefile
> > >> config.status: creating src/consensus/consensus.conf
> > >> config.status: creating src/conversation/Makefile
> > >> config.status: creating src/conversation/conversation.conf
> > >> config.status: creating src/curl/Makefile
> > >> config.status: creating src/datacache/Makefile
> > >> config.status: creating src/datastore/Makefile
> > >> config.status: creating src/datastore/datastore.conf
> > >> config.status: creating src/dht/Makefile
> > >> config.status: creating src/dht/dht.conf
> > >> config.status: creating src/dhtu/Makefile
> > >> config.status: creating src/dns/Makefile
> > >> config.status: creating src/dns/dns.conf
> > >> config.status: creating src/exit/Makefile
> > >> config.status: creating src/fragmentation/Makefile
> > >> config.status: creating src/fs/Makefile
> > >> config.status: creating src/fs/fs.conf
> > >> config.status: creating src/gns/Makefile
> > >> config.status: creating src/gns/gns.conf
> > >> config.status: creating src/gns/nss/Makefile
> > >> config.status: creating src/gnsrecord/Makefile
> > >> config.status: creating src/hello/Makefile
> > >> config.status: creating src/identity/Makefile
> > >> config.status: creating src/identity/identity.conf
> > >> config.status: creating src/include/Makefile
> > >> config.status: creating src/integration-tests/Makefile
> > >> config.status: creating src/json/Makefile
> > >> config.status: creating src/hostlist/Makefile
> > >> config.status: creating src/my/Makefile
> > >> config.status: creating src/mysql/Makefile
> > >> config.status: creating src/namecache/Makefile
> > >> config.status: creating src/namecache/namecache.conf
> > >> config.status: creating src/namestore/Makefile
> > >> config.status: creating src/namestore/namestore.conf
> > >> config.status: creating src/nat/Makefile
> > >> config.status: creating src/nat/nat.conf
> > >> config.status: creating src/nat-auto/Makefile
> > >> config.status: creating src/nat-auto/nat-auto.conf
> > >> config.status: creating src/nse/Makefile
> > >> config.status: creating src/nse/nse.conf
> > >> config.status: creating src/nt/Makefile
> > >> config.status: creating src/peerinfo/Makefile
> > >> config.status: creating src/peerinfo/peerinfo.conf
> > >> config.status: creating src/peerinfo-tool/Makefile
> > >> config.status: creating src/peerstore/Makefile
> > >> config.status: creating src/peerstore/peerstore.conf
> > >> config.status: creating src/pq/Makefile
> > >> config.status: creating src/pt/Makefile
> > >> config.status: creating src/regex/Makefile
> > >> config.status: creating src/regex/regex.conf
> > >> config.status: creating src/revocation/Makefile
> > >> config.status: creating src/revocation/revocation.conf
> > >> config.status: creating src/rps/Makefile
> > >> config.status: creating src/rps/rps.conf
> > >> config.status: creating src/secretsharing/Makefile
> > >> config.status: creating src/secretsharing/secretsharing.conf
> > >> config.status: creating src/scalarproduct/Makefile
> > >> config.status: creating src/scalarproduct/scalarproduct.conf
> > >> config.status: creating src/set/Makefile
> > >> config.status: creating src/set/set.conf
> > >> config.status: creating src/seti/Makefile
> > >> config.status: creating src/seti/seti.conf
> > >> config.status: creating src/setu/Makefile
> > >> config.status: creating src/setu/setu.conf
> > >> config.status: creating src/sq/Makefile
> > >> config.status: creating src/statistics/Makefile
> > >> config.status: creating src/statistics/statistics.conf
> > >> config.status: creating src/template/Makefile
> > >> config.status: creating src/testbed/Makefile
> > >> config.status: creating src/testbed/testbed.conf
> > >> config.status: creating src/testbed-logger/Makefile
> > >> config.status: creating src/testbed-logger/testbed-logger.conf
> > >> config.status: creating src/testing/Makefile
> > >> config.status: creating src/topology/Makefile
> > >> config.status: creating src/transport/Makefile
> > >> config.status: creating src/transport/transport.conf
> > >> config.status: creating src/util/Makefile
> > >> config.status: creating src/util/resolver.conf
> > >> config.status: creating src/vpn/Makefile
> > >> config.status: creating src/vpn/vpn.conf
> > >> config.status: creating src/zonemaster/Makefile
> > >> config.status: creating src/zonemaster/zonemaster.conf
> > >> config.status: creating src/rest/Makefile
> > >> config.status: creating src/abd/Makefile
> > >> config.status: creating src/abd/abd.conf
> > >> config.status: creating src/reclaim/Makefile
> > >> config.status: creating src/messenger/Makefile
> > >> config.status: creating src/messenger/messenger.conf
> > >> config.status: creating pkgconfig/Makefile
> > >> config.status: creating pkgconfig/gnunetarm.pc
> > >> config.status: creating pkgconfig/gnunetats.pc
> > >> config.status: creating pkgconfig/gnunetblock.pc
> > >> config.status: creating pkgconfig/gnunetcadet.pc
> > >> config.status: creating pkgconfig/gnunetconsensus.pc
> > >> config.status: creating pkgconfig/gnunetconversation.pc
> > >> config.status: creating pkgconfig/gnunetcore.pc
> > >> config.status: creating pkgconfig/gnunetdatacache.pc
> > >> config.status: creating pkgconfig/gnunetdatastore.pc
> > >> config.status: creating pkgconfig/gnunetdht.pc
> > >> config.status: creating pkgconfig/gnunetdns.pc
> > >> config.status: creating pkgconfig/gnunetenv.pc
> > >> config.status: creating pkgconfig/gnunetfragmentation.pc
> > >> config.status: creating pkgconfig/gnunetfs.pc
> > >> config.status: creating pkgconfig/gnunetgns.pc
> > >> config.status: creating pkgconfig/gnunethello.pc
> > >> config.status: creating pkgconfig/gnunetidentity.pc
> > >> config.status: creating pkgconfig/gnunetmicrophone.pc
> > >> config.status: creating pkgconfig/gnunetmysql.pc
> > >> config.status: creating pkgconfig/gnunetnamestore.pc
> > >> config.status: creating pkgconfig/gnunetnat.pc
> > >> config.status: creating pkgconfig/gnunetnse.pc
> > >> config.status: creating pkgconfig/gnunetpeerinfo.pc
> > >> config.status: creating pkgconfig/gnunetpq.pc
> > >> config.status: creating pkgconfig/gnunetregex.pc
> > >> config.status: creating pkgconfig/gnunetrevocation.pc
> > >> config.status: creating pkgconfig/gnunetrps.pc
> > >> config.status: creating pkgconfig/gnunetscalarproduct.pc
> > >> config.status: creating pkgconfig/gnunetset.pc
> > >> config.status: creating pkgconfig/gnunetspeaker.pc
> > >> config.status: creating pkgconfig/gnunetstatistics.pc
> > >> config.status: creating pkgconfig/gnunettestbed.pc
> > >> config.status: creating pkgconfig/gnunettesting.pc
> > >> config.status: creating pkgconfig/gnunettransport.pc
> > >> config.status: creating pkgconfig/gnunetutil.pc
> > >> config.status: creating pkgconfig/gnunetvpn.pc
> > >> config.status: creating gnunet_config.h
> > >> config.status: executing depfiles commands
> > >> config.status: executing libtool commands
> > >> config.status: executing po-directories commands
> > >> config.status: creating po/POTFILES
> > >> config.status: creating po/Makefile
> > >> configure: WARNING: GnuTLS lacks DANE support; validation using it will not be possible
> > >> configure: WARNING: Your version of Python is not supported, you might see issues
> > >> configure:
> > >> Detected system
> > >> ===============
> > >>
> > >> GNUnet version:                 0.17.5
> > >>
> > >> Host Setup:                     x86_64-pc-linux-gnu
> > >> Install Prefix:                 /usr
> > >> Compiler:                       gcc
> > >> CFLAGS:                         -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection -fno-strict-aliasing -Wno-address-of-packed-member
> > >> CPPFLAGS:
> > >> LDFLAGS:                        -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -Wl,--unresolved-symbols=report-all
> > >> LIBS:                           -lm
> > >> Build Target:                   linux
> > >>
> > >> Default Interface:              eth0
> > >>
> > >> sqlite3:                        yes
> > >> MySQL:                          no
> > >> PostgreSQL:                     yes
> > >>
> > >> HTTP Client:                    gnurl
> > >> Bluetooth:                      yes
> > >> iptables:                       yes
> > >> ifconfig:                       yes
> > >> UPnPc:                          yes
> > >> GnuTLS:                         yes (without DANE support)
> > >>
> > >> LaTeX:                          yes
> > >>
> > >> libextractor:                   yes
> > >> libzbar:                        yes
> > >> libpng:                         yes
> > >> libidn:                         libidn2
> > >> libopus:                        yes
> > >> libpulse:                       yes
> > >> gstreamer:                      no
> > >>
> > >> Java:                           no
> > >>
> > >> sphinx:                         yes
> > >> mandoc:                         no
> > >>
> > >> GNUnet configuration
> > >> ====================
> > >>
> > >> Transports:                     tcp udp unix http wlan
> > >> Conversation:                   yes (pulse)
> > >> Database Backends               postgres sqlite
> > >> Experimental Code:              yes
> > >>
> > >> Transpiled mdocml Manual:
> > >>
> > >> configure: For detailed setup instructions, type 'info gnunet' after the installation or visit
> > >> https://docs.gnunet.org/
> > >> Installed: curl, libcurl-gnutls
> > >> Not installed: gnurl
> > >>
> > >> $ ./configure
> > >> checking build system type... x86_64-pc-linux-gnu
> > >> checking host system type... x86_64-pc-linux-gnu
> > >> checking target system type... x86_64-pc-linux-gnu
> > >> checking for a BSD-compatible install... /usr/bin/install -c
> > >> checking whether build environment is sane... yes
> > >> checking for a race-free mkdir -p... /usr/bin/mkdir -p
> > >> checking for gawk... gawk
> > >> checking whether make sets $(MAKE)... yes
> > >> checking whether make supports nested variables... yes
> > >> checking whether UID '1000' is supported by ustar format... yes
> > >> checking whether GID '1000' is supported by ustar format... yes
> > >> checking how to create a ustar tar archive... gnutar
> > >> checking whether make supports nested variables... (cached) yes
> > >> checking for gawk... (cached) gawk
> > >> checking for gcc... gcc
> > >> checking whether the C compiler works... yes
> > >> checking for C compiler default output file name... a.out
> > >> checking for suffix of executables...
> > >> checking whether we are cross compiling... no
> > >> checking for suffix of object files... o
> > >> checking whether the compiler supports GNU C... yes
> > >> checking whether gcc accepts -g... yes
> > >> checking for gcc option to enable C11 features... none needed
> > >> checking whether gcc understands -c and -o together... yes
> > >> checking whether make supports the include directive... yes (GNU style)
> > >> checking dependency style of gcc... gcc3
> > >> checking whether gcc and cc understand -c and -o together... yes
> > >> checking whether ln -s works... yes
> > >> checking whether make sets $(MAKE)... (cached) yes
> > >> checking for pkg-config... /usr/bin/pkg-config
> > >> checking pkg-config is at least version 0.29.2... yes
> > >> checking how to print strings... printf
> > >> checking for a sed that does not truncate output... /usr/bin/sed
> > >> checking for grep that handles long lines and -e... /usr/bin/grep
> > >> checking for egrep... /usr/bin/grep -E
> > >> checking for fgrep... /usr/bin/grep -F
> > >> checking for ld used by gcc... /usr/bin/ld
> > >> checking if the linker (/usr/bin/ld) is GNU ld... yes
> > >> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
> > >> checking the name lister (/usr/bin/nm -B) interface... BSD nm
> > >> checking the maximum length of command line arguments... 1572864
> > >> checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
> > >> checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
> > >> checking for /usr/bin/ld option to reload object files... -r
> > >> checking for file... file
> > >> checking for objdump... objdump
> > >> checking how to recognize dependent libraries... pass_all
> > >> checking for dlltool... no
> > >> checking how to associate runtime and link libraries... printf %s\n
> > >> checking for ar... ar
> > >> checking for archiver @FILE support... @
> > >> checking for strip... strip
> > >> checking for ranlib... ranlib
> > >> checking command to parse /usr/bin/nm -B output from gcc object... ok
> > >> checking for sysroot... no
> > >> checking for a working dd... /usr/bin/dd
> > >> checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
> > >> checking for mt... no
> > >> checking if : is a manifest tool... no
> > >> checking for stdio.h... yes
> > >> checking for stdlib.h... yes
> > >> checking for string.h... yes
> > >> checking for inttypes.h... yes
> > >> checking for stdint.h... yes
> > >> checking for strings.h... yes
> > >> checking for sys/stat.h... yes
> > >> checking for sys/types.h... yes
> > >> checking for unistd.h... yes
> > >> checking for vfork.h... no
> > >> checking for dlfcn.h... yes
> > >> checking for objdir... .libs
> > >> checking if gcc supports -fno-rtti -fno-exceptions... no
> > >> checking for gcc option to produce PIC... -fPIC -DPIC
> > >> checking if gcc PIC flag -fPIC -DPIC works... yes
> > >> checking if gcc static flag -static works... yes
> > >> checking if gcc supports -c -o file.o... yes
> > >> checking if gcc supports -c -o file.o... (cached) yes
> > >> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
> > >> checking whether -lc should be explicitly linked in... no
> > >> checking dynamic linker characteristics... GNU/Linux ld.so
> > >> checking how to hardcode library paths into programs... immediate
> > >> checking for shl_load... no
> > >> checking for shl_load in -ldld... no
> > >> checking for dlopen... yes
> > >> checking whether a program can dlopen itself... yes
> > >> checking whether a statically linked program can dlopen itself... no
> > >> checking whether stripping libraries is possible... yes
> > >> checking if libtool supports shared libraries... yes
> > >> checking whether to build shared libraries... yes
> > >> checking whether to build static libraries... no
> > >> checking for special C compiler options needed for large files... no
> > >> checking for _FILE_OFFSET_BITS value needed for large files... no
> > >> checking for _LARGEFILE_SOURCE value needed for large files... no
> > >> checking whether unaligned 64-bit access works... yes
> > >> checking if gcc supports -fno-strict-aliasing... yes
> > >> checking if gcc supports -Wno-address-of-packed-member... yes
> > >> checking if gcc supports -Wno-tautological-constant-out-of-range-compare... no
> > >> checking how to run the C preprocessor... gcc -E
> > >> checking for X... libraries , headers
> > >> checking for gethostbyname... yes
> > >> checking for connect... yes
> > >> checking for remove... yes
> > >> checking for shmat... yes
> > >> checking for IceConnectionNumber in -lICE... yes
> > >> checking for build target... linux
> > >> checking for library containing gethostbyname... none required
> > >> checking for library containing memchr... none required
> > >> checking for library containing memset_s... no
> > >> checking for library containing explicit_bzero... none required
> > >> checking for socket in -lsocket... no
> > >> checking for log in -lm... yes
> > >> checking for getloadavg... yes
> > >> checking for getopt... true
> > >> checking for pkgconf... /usr/bin/pkg-config
> > >> checking for ssh... true
> > >> checking for SSH key... no
> > >> checking for a Python interpreter with version >= 3.4... python
> > >> checking for python... /usr/bin/python
> > >> checking for python version... 3.10
> > >> checking for python platform... linux
> > >> checking for GNU default python prefix... ${prefix}
> > >> checking for GNU default python exec_prefix... ${exec_prefix}
> > >> checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.10/site-packages
> > >> checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.10/site-packages
> > >> checking for perl... /usr/bin/perl
> > >> checking for pdflatex... pdflatex
> > >> checking for the TikZ package for LaTeX... yes
> > >> checking for pdflatex... (cached) pdflatex
> > >> checking for the QR Code package for LaTeX... no
> > >> checking for pdflatex... (cached) pdflatex
> > >> checking for the Labels package for LaTeX... yes
> > >> checking for -iptables... no
> > >> checking for iptables... /usr/bin/iptables
> > >> checking for -ip6tables... no
> > >> checking for ip6tables... /usr/bin/ip6tables
> > >> checking for -ip... no
> > >> checking for ip... /usr/bin/ip
> > >> checking for -ifconfig... no
> > >> checking for ifconfig... /usr/bin/ifconfig
> > >> checking for adduser... false
> > >> checking for -sysctl... no
> > >> checking for sysctl... /usr/bin/sysctl
> > >> checking for -upnpc... no
> > >> checking for upnpc... /usr/bin/upnpc
> > >> checking for checkbashisms... no
> > >> checking for checkbashisms.pl... no
> > >> checking for uncrustify... false
> > >> checking for yapf... no
> > >> checking for struct tm.tm_gmtoff... yes
> > >> checking for getaddrinfo_a in -lanl... yes
> > >> checking for libgcrypt-config... /usr/bin/libgcrypt-config
> > >> checking for LIBGCRYPT - version >= 1.6.0... yes (1.10.1-unknown)
> > >> checking LIBGCRYPT API version... okay
> > >> checking for gcc options needed to detect all undeclared functions... none needed
> > >> checking whether gcry_mpi_set_opaque_copy is declared... yes
> > >> checking for if_tun.h... no
> > >> checking for linux/if_tun.h... yes
> > >> checking whether struct in6_ifreq is declared... no
> > >> checking for sphinx-build... true
> > >> checking for mandoc... no
> > >> checking for a working HMAC... yes
> > >> checking for static assertion support... yes
> > >> checking for bluetooth/bluetooth.h... yes
> > >> checking for ba2str in -lbluetooth... yes
> > >> checking for zbar.h... yes
> > >> checking for zbar_processor_create in -lzbar... yes
> > >> checking for png.h... yes
> > >> checking for png_create_read_struct in -lpng... yes
> > >> checking for pabc/pabc.h... yes
> > >> checking for pabc_new_ctx in -lpabc... no
> > >> checking for jansson.h... yes
> > >> checking for json_loads in -ljansson... yes
> > >> checking for jose/jose.h... yes
> > >> checking for jose_jwk_gen in -ljose... yes
> > >> checking for pulse/simple.h... yes
> > >> checking for pa_stream_peek in -lpulse... yes
> > >> checking for opus/opus.h... yes
> > >> checking for opus_decode_float in -lopus... yes
> > >> checking for ogg/ogg.h... yes
> > >> checking for ogg_stream_flush_fill in -logg... yes
> > >> checking for GST... yes
> > >> checking for conversation feature set to build... pulse
> > >> checking for gawk... (cached) gawk
> > >> checking for gnurl-config... no
> > >> checking whether libgnurl is usable... no
> > >> checking for gawk... (cached) gawk
> > >> checking for curl-config... /usr/bin/curl-config
> > >> checking for the version of libcurl... 7.85.0
> > >> checking for libcurl >= version 7.34.0... yes
> > >> checking whether libcurl is usable... yes
> > >> checking for curl_free... yes
> > >> checking for library containing __atomic_load_8... -latomic
> > >> checking for nss.h... yes
> > >> checking whether NSS_STATUS_UNAVAIL is declared... yes
> > >> checking for kvm_open in -lkvm... no
> > >> checking for kstat_open in -lkstat... no
> > >> checking for sodium.h... yes
> > >> checking for crypto_core_ed25519_scalar_mul in -lsodium... yes
> > >> checking for extractor.h... yes
> > >> checking for EXTRACTOR_plugin_add_defaults in -lextractor... yes
> > >> checking for ltdl.h... yes
> > >> checking for lt_dlopenext in -lltdl... yes
> > >> checking for idn2.h... yes
> > >> checking for idn2_to_unicode_8z8z in -lidn2... yes
> > >> checking for zlib.h... yes
> > >> checking for compress2 in -lz... yes
> > >> checking for ld used by gcc... /usr/bin/ld -m elf_x86_64
> > >> checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
> > >> checking for shared library run path origin... done
> > >> checking for iconv... yes
> > >> checking for working iconv... yes
> > >> checking for iconv declaration...
> > >>         extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
> > >> checking for libunistring... yes
> > >> checking how to link with libunistring... /usr/lib/libunistring.so
> > >> checking for libunistring version... 1.0.0
> > >> checking for sqlite3.h... yes
> > >> checking for sqlite3_open in -lsqlite3... yes
> > >> checking for pkg-config... (cached) /usr/bin/pkg-config
> > >> checking pkg-config is at least version 0.9.0... yes
> > >> checking for the PostgreSQL libraries CPPFLAGS...
> > >> checking for the PostgreSQL libraries LDFLAGS...
> > >> checking for the PostgreSQL libraries LIBS... -lpq
> > >> checking for the PostgreSQL version... 14.5
> > >> checking for libpq-fe.h... yes
> > >> checking for the PostgreSQL library linking is working... yes
> > >> checking for libpq-fe.h... (cached) yes
> > >> checking for mysql_init in -lmysqlclient... no
> > >> checking for MHD... yes
> > >> checking for gnutls/abstract.h... yes
> > >> checking for gnutls_priority_set in -lgnutls... yes
> > >> checking for gnutls/dane.h... no
> > >> checking for dirent.h that defines DIR... yes
> > >> checking for library containing opendir... none required
> > >> checking for fcntl.h... yes
> > >> checking for math.h... yes
> > >> checking for errno.h... yes
> > >> checking for ctype.h... yes
> > >> checking for limits.h... yes
> > >> checking for stdarg.h... yes
> > >> checking for signal.h... yes
> > >> checking for locale.h... yes
> > >> checking for stdatomic.h... yes
> > >> checking for malloc.h... yes
> > >> checking for malloc/malloc.h... no
> > >> checking for malloc/malloc_np.h... no
> > >> checking for langinfo.h... yes
> > >> checking for sys/param.h... yes
> > >> checking for sys/mount.h... yes
> > >> checking for sys/statvfs.h... yes
> > >> checking for sys/select.h... yes
> > >> checking for sockLib.h... no
> > >> checking for sys/mman.h... yes
> > >> checking for sys/msg.h... yes
> > >> checking for sys/vfs.h... yes
> > >> checking for arpa/inet.h... yes
> > >> checking for libintl.h... yes
> > >> checking for netdb.h... yes
> > >> checking for netinet/in.h... yes
> > >> checking for sys/ioctl.h... yes
> > >> checking for sys/socket.h... yes
> > >> checking for sys/time.h... yes
> > >> checking for sys/sysinfo.h... yes
> > >> checking for sys/file.h... yes
> > >> checking for sys/resource.h... yes
> > >> checking for ifaddrs.h... yes
> > >> checking for mach/mach.h... no
> > >> checking for sys/timeb.h... yes
> > >> checking for argz.h... yes
> > >> checking for ucred.h... no
> > >> checking for sys/ucred.h... no
> > >> checking for endian.h... yes
> > >> checking for sys/endian.h... no
> > >> checking for execinfo.h... yes
> > >> checking for byteswap.h... yes
> > >> checking whether NLS is requested... yes
> > >> checking for msgfmt... /usr/bin/msgfmt
> > >> checking for gmsgfmt... /usr/bin/msgfmt
> > >> checking for xgettext... /usr/bin/xgettext
> > >> checking for msgmerge... /usr/bin/msgmerge
> > >> checking for CFPreferencesCopyAppValue... no
> > >> checking for CFLocaleCopyCurrent... no
> > >> checking for GNU gettext in libc... yes
> > >> checking whether to use NLS... yes
> > >> checking where the gettext function comes from... libc
> > >> checking for pid_t... yes
> > >> checking for size_t... yes
> > >> checking for mode_t... yes
> > >> checking whether stat file-mode macros are broken... no
> > >> checking for _Bool... yes
> > >> checking for stdbool.h that conforms to C99... yes
> > >> checking whether struct tm is in sys/time.h or time.h... time.h
> > >> checking for struct sockaddr_in.sin_len... no
> > >> checking for struct sockaddr_un.sun_len... no
> > >> checking for off_t... yes
> > >> checking for uid_t in sys/types.h... yes
> > >> checking for fork... yes
> > >> checking for vfork... yes
> > >> checking for working fork... yes
> > >> checking for working vfork... (cached) yes
> > >> checking for working chown... yes
> > >> checking for atoll... yes
> > >> checking for stat64... yes
> > >> checking for strnlen... yes
> > >> checking for mremap... yes
> > >> checking for getrlimit... yes
> > >> checking for setrlimit... yes
> > >> checking for sysconf... yes
> > >> checking for initgroups... yes
> > >> checking for strndup... yes
> > >> checking for gethostbyname2... yes
> > >> checking for getpeerucred... no
> > >> checking for getpeereid... no
> > >> checking for setresuid... yes
> > >> checking for getifaddrs... yes
> > >> checking for freeifaddrs... yes
> > >> checking for getresgid... yes
> > >> checking for mallinfo2... yes
> > >> checking for malloc_size... no
> > >> checking for malloc_usable_size... yes
> > >> checking for getrusage... yes
> > >> checking for random... yes
> > >> checking for srandom... yes
> > >> checking for stat... yes
> > >> checking for statfs... yes
> > >> checking for statvfs... yes
> > >> checking for wait4... yes
> > >> checking for timegm... yes
> > >> checking for sudo... sudo
> > >> checking for doas... no
> > >> checking if __thread is supported... yes
> > >> checking for git... /usr/bin/git
> > >> checking if source is under a VCS... no
> > >> checking that generated files are newer than configure... done
> > >> configure: creating ./config.status
> > >> config.status: creating Makefile
> > >> config.status: creating bin/Makefile
> > >> config.status: creating contrib/Makefile
> > >> config.status: creating contrib/hellos/Makefile
> > >> config.status: creating contrib/services/Makefile
> > >> config.status: creating contrib/services/openrc/Makefile
> > >> config.status: creating contrib/services/systemd/Makefile
> > >> config.status: creating contrib/scripts/Makefile
> > >> config.status: creating contrib/scripts/gnunet-logread/Makefile
> > >> config.status: creating doc/Makefile
> > >> config.status: creating doc/man/Makefile
> > >> config.status: creating doc/doxygen/Makefile
> > >> config.status: creating m4/Makefile
> > >> config.status: creating po/Makefile.in
> > >> config.status: creating src/Makefile
> > >> config.status: creating src/arm/Makefile
> > >> config.status: creating src/arm/arm.conf
> > >> config.status: creating src/ats/Makefile
> > >> config.status: creating src/ats/ats.conf
> > >> config.status: creating src/ats-tool/Makefile
> > >> config.status: creating src/auction/Makefile
> > >> config.status: creating src/block/Makefile
> > >> config.status: creating src/cadet/Makefile
> > >> config.status: creating src/cadet/cadet.conf
> > >> config.status: creating src/core/Makefile
> > >> config.status: creating src/core/core.conf
> > >> config.status: creating src/consensus/Makefile
> > >> config.status: creating src/consensus/consensus.conf
> > >> config.status: creating src/conversation/Makefile
> > >> config.status: creating src/conversation/conversation.conf
> > >> config.status: creating src/curl/Makefile
> > >> config.status: creating src/datacache/Makefile
> > >> config.status: creating src/datastore/Makefile
> > >> config.status: creating src/datastore/datastore.conf
> > >> config.status: creating src/dht/Makefile
> > >> config.status: creating src/dht/dht.conf
> > >> config.status: creating src/dhtu/Makefile
> > >> config.status: creating src/dns/Makefile
> > >> config.status: creating src/dns/dns.conf
> > >> config.status: creating src/exit/Makefile
> > >> config.status: creating src/fragmentation/Makefile
> > >> config.status: creating src/fs/Makefile
> > >> config.status: creating src/fs/fs.conf
> > >> config.status: creating src/gns/Makefile
> > >> config.status: creating src/gns/gns.conf
> > >> config.status: creating src/gns/nss/Makefile
> > >> config.status: creating src/gnsrecord/Makefile
> > >> config.status: creating src/hello/Makefile
> > >> config.status: creating src/identity/Makefile
> > >> config.status: creating src/identity/identity.conf
> > >> config.status: creating src/include/Makefile
> > >> config.status: creating src/integration-tests/Makefile
> > >> config.status: creating src/json/Makefile
> > >> config.status: creating src/hostlist/Makefile
> > >> config.status: creating src/my/Makefile
> > >> config.status: creating src/mysql/Makefile
> > >> config.status: creating src/namecache/Makefile
> > >> config.status: creating src/namecache/namecache.conf
> > >> config.status: creating src/namestore/Makefile
> > >> config.status: creating src/namestore/namestore.conf
> > >> config.status: creating src/nat/Makefile
> > >> config.status: creating src/nat/nat.conf
> > >> config.status: creating src/nat-auto/Makefile
> > >> config.status: creating src/nat-auto/nat-auto.conf
> > >> config.status: creating src/nse/Makefile
> > >> config.status: creating src/nse/nse.conf
> > >> config.status: creating src/nt/Makefile
> > >> config.status: creating src/peerinfo/Makefile
> > >> config.status: creating src/peerinfo/peerinfo.conf
> > >> config.status: creating src/peerinfo-tool/Makefile
> > >> config.status: creating src/peerstore/Makefile
> > >> config.status: creating src/peerstore/peerstore.conf
> > >> config.status: creating src/pq/Makefile
> > >> config.status: creating src/pt/Makefile
> > >> config.status: creating src/regex/Makefile
> > >> config.status: creating src/regex/regex.conf
> > >> config.status: creating src/revocation/Makefile
> > >> config.status: creating src/revocation/revocation.conf
> > >> config.status: creating src/rps/Makefile
> > >> config.status: creating src/rps/rps.conf
> > >> config.status: creating src/secretsharing/Makefile
> > >> config.status: creating src/secretsharing/secretsharing.conf
> > >> config.status: creating src/scalarproduct/Makefile
> > >> config.status: creating src/scalarproduct/scalarproduct.conf
> > >> config.status: creating src/set/Makefile
> > >> config.status: creating src/set/set.conf
> > >> config.status: creating src/seti/Makefile
> > >> config.status: creating src/seti/seti.conf
> > >> config.status: creating src/setu/Makefile
> > >> config.status: creating src/setu/setu.conf
> > >> config.status: creating src/sq/Makefile
> > >> config.status: creating src/statistics/Makefile
> > >> config.status: creating src/statistics/statistics.conf
> > >> config.status: creating src/template/Makefile
> > >> config.status: creating src/testbed/Makefile
> > >> config.status: creating src/testbed/testbed.conf
> > >> config.status: creating src/testbed-logger/Makefile
> > >> config.status: creating src/testbed-logger/testbed-logger.conf
> > >> config.status: creating src/testing/Makefile
> > >> config.status: creating src/topology/Makefile
> > >> config.status: creating src/transport/Makefile
> > >> config.status: creating src/transport/transport.conf
> > >> config.status: creating src/util/Makefile
> > >> config.status: creating src/util/resolver.conf
> > >> config.status: creating src/vpn/Makefile
> > >> config.status: creating src/vpn/vpn.conf
> > >> config.status: creating src/zonemaster/Makefile
> > >> config.status: creating src/zonemaster/zonemaster.conf
> > >> config.status: creating src/rest/Makefile
> > >> config.status: creating src/abd/Makefile
> > >> config.status: creating src/abd/abd.conf
> > >> config.status: creating src/reclaim/Makefile
> > >> config.status: creating src/messenger/Makefile
> > >> config.status: creating src/messenger/messenger.conf
> > >> config.status: creating pkgconfig/Makefile
> > >> config.status: creating pkgconfig/gnunetarm.pc
> > >> config.status: creating pkgconfig/gnunetats.pc
> > >> config.status: creating pkgconfig/gnunetblock.pc
> > >> config.status: creating pkgconfig/gnunetcadet.pc
> > >> config.status: creating pkgconfig/gnunetconsensus.pc
> > >> config.status: creating pkgconfig/gnunetconversation.pc
> > >> config.status: creating pkgconfig/gnunetcore.pc
> > >> config.status: creating pkgconfig/gnunetdatacache.pc
> > >> config.status: creating pkgconfig/gnunetdatastore.pc
> > >> config.status: creating pkgconfig/gnunetdht.pc
> > >> config.status: creating pkgconfig/gnunetdns.pc
> > >> config.status: creating pkgconfig/gnunetenv.pc
> > >> config.status: creating pkgconfig/gnunetfragmentation.pc
> > >> config.status: creating pkgconfig/gnunetfs.pc
> > >> config.status: creating pkgconfig/gnunetgns.pc
> > >> config.status: creating pkgconfig/gnunethello.pc
> > >> config.status: creating pkgconfig/gnunetidentity.pc
> > >> config.status: creating pkgconfig/gnunetmicrophone.pc
> > >> config.status: creating pkgconfig/gnunetmysql.pc
> > >> config.status: creating pkgconfig/gnunetnamestore.pc
> > >> config.status: creating pkgconfig/gnunetnat.pc
> > >> config.status: creating pkgconfig/gnunetnse.pc
> > >> config.status: creating pkgconfig/gnunetpeerinfo.pc
> > >> config.status: creating pkgconfig/gnunetpq.pc
> > >> config.status: creating pkgconfig/gnunetregex.pc
> > >> config.status: creating pkgconfig/gnunetrevocation.pc
> > >> config.status: creating pkgconfig/gnunetrps.pc
> > >> config.status: creating pkgconfig/gnunetscalarproduct.pc
> > >> config.status: creating pkgconfig/gnunetset.pc
> > >> config.status: creating pkgconfig/gnunetspeaker.pc
> > >> config.status: creating pkgconfig/gnunetstatistics.pc
> > >> config.status: creating pkgconfig/gnunettestbed.pc
> > >> config.status: creating pkgconfig/gnunettesting.pc
> > >> config.status: creating pkgconfig/gnunettransport.pc
> > >> config.status: creating pkgconfig/gnunetutil.pc
> > >> config.status: creating pkgconfig/gnunetvpn.pc
> > >> config.status: creating gnunet_config.h
> > >> config.status: executing depfiles commands
> > >> config.status: executing libtool commands
> > >> config.status: executing po-directories commands
> > >> config.status: creating po/POTFILES
> > >> config.status: creating po/Makefile
> > >> configure: WARNING: GnuTLS lacks DANE support; validation using it will not be possible
> > >> configure: WARNING: Your version of Python is not supported, you might see issues
> > >> configure:
> > >> Detected system
> > >> ===============
> > >>
> > >> GNUnet version:                 0.17.5
> > >>
> > >> Host Setup:                     x86_64-pc-linux-gnu
> > >> Install Prefix:                 /usr
> > >> Compiler:                       gcc
> > >> CFLAGS:                         -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection -fno-strict-aliasing -Wno-address-of-packed-member
> > >> CPPFLAGS:
> > >> LDFLAGS:                        -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -Wl,--unresolved-symbols=report-all
> > >> LIBS:                           -lm
> > >> Build Target:                   linux
> > >>
> > >> Default Interface:              eth0
> > >>
> > >> sqlite3:                        yes
> > >> MySQL:                          no
> > >> PostgreSQL:                     yes
> > >>
> > >> HTTP Client:                    curl-openssl
> > >> Bluetooth:                      yes
> > >> iptables:                       yes
> > >> ifconfig:                       yes
> > >> UPnPc:                          yes
> > >> GnuTLS:                         yes (without DANE support)
> > >>
> > >> LaTeX:                          yes
> > >>
> > >> libextractor:                   yes
> > >> libzbar:                        yes
> > >> libpng:                         yes
> > >> libidn:                         libidn2
> > >> libopus:                        yes
> > >> libpulse:                       yes
> > >> gstreamer:                      no
> > >>
> > >> Java:                           no
> > >>
> > >> sphinx:                         yes
> > >> mandoc:                         no
> > >>
> > >> GNUnet configuration
> > >> ====================
> > >>
> > >> Transports:                     tcp udp unix http wlan
> > >> Conversation:                   yes (pulse)
> > >> Database Backends               postgres sqlite
> > >> Experimental Code:              yes
> > >>
> > >> Transpiled mdocml Manual:
> > >>
> > >> configure: For detailed setup instructions, type 'info gnunet' after the installation or visit
> > >> https://docs.gnunet.org/
> > >>
> > >> On Mon, Sep 5, 2022 at 7:14 PM Christian Grothoff <[email protected]> wrote:
> > >> Did you happen to have both libcurl-gnutls and libcurl-openssl
> > >> installed, and maybe configure found the wrong one?
> > >>
> > >> On 9/5/22 18:56, madmurphy wrote:
> > >>> Mmm I just checked better, and the |configure| script now says:
> > >>>
> > >>> ...
> > >>> HTTP Client:                    curl-openssl
> > >>> ...
> > >>>
> > >>> That is not a good sign, right?
> > >>>
> > >>>
> > >>> On Mon, Sep 5, 2022 at 5:47 PM madmurphy <[email protected]
> > >>> <mailto:[email protected]>> wrote:
> > >>>
> > >>>    Indeed, there is a dedicated package on Arch, |libcurl-gnutls|
> > >>>    <https://archlinux.org/packages/core/x86_64/libcurl-gnutls/>. I just
> > >>>    checked, and it seems that GNUnet works fine with it. Package
> > >>>    updated
> > >>>    <https://aur.archlinux.org/cgit/aur.git/commit/?h=gnunet&id=3693252e6dcdf53bfa428b4c078729c08f68ecde>.
> > >>>
> > >>>    --madmurphy
> > >>>
> > >>>
> > >>>    On Mon, Sep 5, 2022 at 4:25 PM Christian Grothoff
> > >>>    <[email protected] <mailto:[email protected]>> wrote:
> > >>>
> > >>>        If Arch has a curl linked against GnuTLS, then yes. -Christian
> > >>>
> > >>>        On 9/5/22 17:11, madmurphy wrote:
> > >>>> On Arch GNUnet still depends on GNUrl, but as far as I
> > >>>        understood now
> > >>>> cURL is preferred. Would I do the right thing if updated the Arch
> > >>>> package accordingly and dropped the GNUrl dependency for good?
> > >>>>
> > >>>> --madmurphy
> > >>>
> > >>
> > >
> >
>
signature.asc (application/pgp-signature, 833 B)