Re: Cannot bootstrap GNUnet 0.21.0

--=-cEe2dNrh8aK0h+R2dhhp
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

Hi,

I hope the recent release (0.21.1) fixes the issues you have seen.

BR
Martin

On Wed, 2024-03-13 at 19:53 +0100, Martin Schanzenbach wrote:
> did you install using meson? then you may be missing dhtu.conf
>=20
>=20
> Am 13. M=C3=A4rz 2024 19:29:33 MEZ schrieb t3sserakt <[email protected]>:
> > I guess the log level of your peer is not DEBUG.
> >=20
> > Please start the peer like this
> >=20
> > GNUNET_FORCE_LOG=3D';;;;DEBUG' GNUNET_FORCE_LOGFILE=3D'gnunet.log'
> > gnunet-arm -s
> >=20
> > On 13.03.24 17:46, marty1885 wrote:
> > > Hi,
> > >=20
> > > Thanks for the direction. I looked into my GNUnet logs and see
> > > DHT is spamming "No DHT underlays configured" message.
> > >=20
> > > I have attached a debug log. GNUnet generated more then 10MB in
> > > less then 1 minutes.
> > >=20
> > > 2024-03-14T00:38:24.453491+0800 dht-3589431 ERROR No DHT
> > > underlays configured!
> > > 2024-03-14T00:38:24.477297+0800 dht-3589432 ERROR No DHT
> > > underlays configured!
> > > 2024-03-14T00:38:24.501079+0800 dht-3589433 ERROR No DHT
> > > underlays configured!
> > > 2024-03-14T00:38:24.518726+0800 dht-3589434 ERROR No DHT
> > > underlays configured!
> > > 2024-03-14T00:38:24.535907+0800 dht-3589435 ERROR No DHT
> > > underlays configured!
> > > 2024-03-14T00:38:24.555994+0800 dht-3589436 ERROR No DHT
> > > underlays configured!
> > > 2024-03-14T00:38:24.576093+0800 dht-3589437 ERROR No DHT
> > > underlays configured!
> > > ...
> > > On Wednesday, March 13th, 2024 at 6:45 PM, t3sserakt
> > > <[email protected]> wrote:
> > >=20
> > > > Hey Martin,
> > > >=20
> > > > the actual log of the bootstrap peer begins 9 in the morning on
> > > > the 12th. I can not see any log entry for your peer CCXH in the
> > > > bootstrap peer logs.
> > > >=20
> > > > Do you have any output if you grep for "Abort" in yours peer
> > > > log file?
> > > >=20
> > > > You could start your peer with log level DEBUG to see more
> > > > details what your peer is doing, and could provide us the log
> > > > entries of your log running for a minute after starting the
> > > > peer with log level DEBUG.
> > > >=20
> > > > - t3sserakt
> > > >=20
> > > > On 13.03.24 11:10, marty1885 wrote:
> > > >=20
> > > > > Hi,
> > > > >=20
> > > > > Yes. I've restarted GNUnet several times. For safety I've
> > > > > restarted it once again after reeving your reply. Still can't
> > > > > bootstrap.
> > > > >=20
> > > > > Martin
> > > > >=20
> > > > > On Tuesday, March 12th, 2024 at 10:15 PM, Schanzenbach,
> > > > > Martin <[email protected]> wrote:
> > > > >=20
> > > > > > Hi,
> > > > > >=20
> > > > > > did you try again the last few days?
> > > > > > We are currently observing better connectivity after fixing
> > > > > > a
> > > > > > configuration mistake on the bootstrap peer.
> > > > > >=20
> > > > > > Best
> > > > > > Martin
> > > > > >=20
> > > > > > On 10.03.24 15:41, marty1885 wrote:
> > > > > >=20
> > > > > > > I deleted the databases for namestore and peerstore to
> > > > > > > get all processes running (peerstore and namestore was
> > > > > > > failing). But still no peer connections.
> > > > > > >=20
> > > > > > > `=E2=9D=AF gnunet-arm -I Services (excluding stopped services=
):
> > > > > > > (started: 23 / stopped: 22) cadet (binary=3D'gnunet-
> > > > > > > service-cadet', status=3Dstarted) core (binary=3D'gnunet-
> > > > > > > service-core', status=3Dstarted) datastore (binary=3D'gnunet-
> > > > > > > service-datastore', status=3Dstarted) dht (binary=3D'gnunet-
> > > > > > > service-dht', status=3Dstarted) fs (binary=3D'gnunet-service-
> > > > > > > fs', status=3Dstarted) gns (binary=3D'gnunet-service-gns',
> > > > > > > status=3Dstarted) hostlist (binary=3D'gnunet-daemon-
> > > > > > > hostlist', status=3Dstarted) identity (binary=3D'gnunet-
> > > > > > > service-identity', status=3Dstarted) namecache
> > > > > > > (binary=3D'gnunet-service-namecache', status=3Dstarted)
> > > > > > > namestore (binary=3D'gnunet-service-namestore',
> > > > > > > status=3Dstarted) nat (binary=3D'gnunet-service-nat',
> > > > > > > status=3Dstarted) nse (binary=3D'gnunet-service-nse',
> > > > > > > status=3Dstarted) peerstore (binary=3D'gnunet-service-
> > > > > > > peerstore', status=3Dstarted) reclaim (binary=3D'gnunet-
> > > > > > > service-reclaim', status=3Dstarted) rest (binary=3D'gnunet-
> > > > > > > rest-server', status=3Dstarted) revocation (binary=3D'gnunet-
> > > > > > > service-revocation', status=3Dstarted) rps (binary=3D'gnunet-
> > > > > > > service-rps', status=3Dstarted) setu (binary=3D'gnunet-
> > > > > > > service-setu', status=3Dstarted) statistics
> > > > > > > (binary=3D'gnunet-service-statistics', status=3Dstarted)
> > > > > > > topology (binary=3D'gnunet-daemon-topology',
> > > > > > > status=3Dstarted) transport (binary=3D'gnunet-service-
> > > > > > > transport', status=3Dstarted) communicator-tcp
> > > > > > > (binary=3D'gnunet-communicator-tcp', status=3Dstarted)
> > > > > > > zonemaster (binary=3D'gnunet-service-zonemaster',
> > > > > > > status=3Dstarted)`
> > > > > > >=20
> > > > > > > On Sunday, March 10th, 2024 at 3:00 PM, Schanzenbach,
> > > > > > > Martin [email protected] wrote:
> > > > > > >=20
> > > > > > > > Hi,
> > > > > > > >=20
> > > > > > > > what does gnunet-arm -I output? Are all of the services
> > > > > > > > running?
> > > > > > > > For example, the peerstore database layout changed, so
> > > > > > > > you probably have
> > > > > > > > to delete your old database
> > > > > > > > ($HOME/.local/share/gnunet/peerstore/sqlite.db).
> > > > > > > >=20
> > > > > > > > The road to a stable TNG will also be bumpy, so we rely
> > > > > > > > on reports such
> > > > > > > > as this to iron out the remaining bugs with it.
> > > > > > > >=20
> > > > > > > > BR
> > > > > > > > Martin
> > > > > > > >=20
> > > > > > > > On 10.03.24 06:08, marty1885 wrote:
> > > > > > > >=20
> > > > > > > > > Thanks for the reply.
> > > > > > > > >=20
> > > > > > > > > I tried a few commands and still feels like my node
> > > > > > > > > is really not connected. DHT can't put, NSE returns a
> > > > > > > > > very small network size and GNS cannot resolve.
> > > > > > > > >=20
> > > > > > > > > Is this expected?
> > > > > > > > >=20
> > > > > > > > > ```
> > > > > > > > > =E2=9D=AF gnunet-core -si
> > > > > > > > > Current local peer identity:
> > > > > > > > > CCXHBE49GRQVFAVFQ3BXVXPHHD63NG6ZNY31R0F59KVDZQA42PTG
> > > > > > > > > (no further output)
> > > > > > > > >=20
> > > > > > > > > =E2=9D=AF gnunet-dht-put -k "hello" -d "world" -e 40m
> > > > > > > > > (hangs, this used to return almost immidately)
> > > > > > > > >=20
> > > > > > > > > =E2=9D=AF gnunet-nse
> > > > > > > > > 1710047156276913 1.688203 0.755488 1.474102
> > > > > > > > >=20
> > > > > > > > > =E2=9D=AF gnunet-gns -u gnunet.gns.alt -t PKEY
> > > > > > > > >=20
> > > > > > > > > > > > Looking for `PKEY' records under`
> > > > > > > > > > > > gnunet.gns.alt'
> > > > > > > > > > > > (no output)
> > > > > > > > > > > > ```
> > > > > > > > > >=20
> > > > > > > > > On Saturday, March 9th, 2024 at 11:39 PM,
> > > > > > > > > Schanzenbach, Martin [email protected] wrote:
> > > > > > > > >=20
> > > > > > > > > > Hi,
> > > > > > > > > >=20
> > > > > > > > > > the behaviour of gnunet-core changed. You can check
> > > > > > > > > > the new switches
> > > > > > > > > > with --help.
> > > > > > > > > > Long-term core connections are know to be
> > > > > > > > > > problematic behind NATs, still.
> > > > > > > > > > But with a freshly started peer, "gnunet-core -i"
> > > > > > > > > > should give you your
> > > > > > > > > > peer id, "gnunet-core -s" the connections (you can
> > > > > > > > > > also combine the
> > > > > > > > > > switches).
> > > > > > > > > > The command should probably output the help when
> > > > > > > > > > called without arguments.
> > > > > > > > > >=20
> > > > > > > > > > BR
> > > > > > > > > > Martin
> > > > > > > > > >=20
> > > > > > > > > > On 09.03.24 14:55, marty1885 wrote:
> > > > > > > > > >=20
> > > > > > > > > > > Hi all,
> > > > > > > > > > >=20
> > > > > > > > > > > I've just built and installed the new GNUnet
> > > > > > > > > > > 0.21. But my node isn't connected to any peer
> > > > > > > > > > > after hours of waiting. Running gnunet-core shows
> > > > > > > > > > > no node is connected to me.
> > > > > > > > > > >=20
> > > > > > > > > > > `=E2=9D=AF gnunet-core (no output)`
> > > > > > > > > > >=20
> > > > > > > > > > > I have also checked `iotop` and can confirm
> > > > > > > > > > > gnunet-service-transport isn't doing much IO.
> > > > > > > > > > > While I was expecting at least hundreds of Kbps
> > > > > > > > > > > from experience in the past.
> > > > > > > > > > >=20
> > > > > > > > > > > How can I connect to the network? Please let me
> > > > > > > > > > > know what information I can provide to diagnose
> > > > > > > > > > > the issue.
> > > > > > > > > > >=20
> > > > > > > > > > > Best,
> > > > > > > > > > > Martin


--=-cEe2dNrh8aK0h+R2dhhp
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
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=pWJz
-----END PGP SIGNATURE-----

--=-cEe2dNrh8aK0h+R2dhhp--