Re: iptables question

Rick Miller <[email protected]>
Newsgroups gmane.network.guarddog
Message-ID <[email protected]>
I am running Fedora Core 4 on each.  Uname output of working computer is:

Linux xxxx 2.6.15-1.1831_FC4smp #1 SMP Tue Feb 7 13:48:31 EST 2006 i686 i686
i386 GNU/Linux

Uname output for non-working computer is:

Linux xxxx 2.6.15-1.1833_FC4 #1 Wed Mar 1 23:41:37 EST 2006 i686 i686 i386
GNU/Linux

The non-working computer is at my home.  I have a cable modem/router issuing
IP addresses and the PC is connected through Ethernet.  The other PC is at
work with a high speed LAN & internet connection also connected through
Ethernet.

Thanks,
Rick




Date: Sat, 4 Mar 2006 03:59:38 +0200
From: Peter Sheldon <[email protected]>
To: [email protected]
Subject: Re: [GD-user] iptables question


I presume, because you don't say so, :-)
that both PC's are connected directly to the internet via ether ADSL or a
modem?

What distribution are you running?

I may not be able help you but I know that the above info is needed

regards
peter

On Fri, 03 Mar 2006 15:26:44 -0500
[email protected] wrote:

> I have two computers both running Fedora Core 4.  I recently came across
> GueardDog and decided to give it a try.  On the one computer everything
> seems fine.  On the second computer, I am having some oddities.
> 
> For example, if I run "service --status-all" it reports back that the
> firewall is stopped.  Running this on the working computer it will show
> the ruleset for the firewall.  
> 
> If I type "service iptables start" it returns no results.  If I run
> Guarddog and apply the configuration, then type "service iptables start"
> it returns 3 lines:
> Flushing firewall rules:                                   [  OK  ]
> Setting chains to policy ACCEPT: filter                    [  OK  ]
> Unloading iptables modules:                                [  OK  ]
> 
> Then if I run "service --status-all" immediately afterward, it still
> shows the firewall is stopped.  Using chkconfig I have made sure that
> iptables is set to run for runlevels 2-5.
> 
> Does anyone have any ideas or suggestions?  
> 
> Thanks,
> Rick
> 



--__--__--

_______________________________________________
Guarddog-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/guarddog-user


End of Guarddog-user Digest



-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.