Re: NFS connection dropped
"K. Elo" <[email protected]>
| Newsgroups | gmane.network.guarddog |
|---|---|
| Message-ID | <[email protected]> |
Hi again, Kevin Ferguson wrote on 31.5.2005 at 13:26: > Hi Kimmo > > I've attempted NFS using guraddog and it does work. However this was > some months ago. It worth checking you exports are setup correctly, > in /etc/exports. I got this wrong, although I could ping the server, > I could not connect to the share. It sounds more like a > configuration problem than guarddog issue. have you tried dropping > the firewall and testing your nfs connection? Have you previosly had > your nfs server working prior to installing guarddog? Well, the problem seems to be linked with Guarddog. When I dropped the firewall I could establish a connection to the nfs server and transport data between it and the client. The /etc/exports file is configured with YaST and seems to be OK, too. So, obviously the firewall is too "hardened" - I just cannot figure out what services should be enabled (ftp, http ... ). As I mentioned, the connection is dropped by Guarddog on laptop (I controlled the log console after I had given the "mount" command) so the attempt never reaches the server... BTW, if I have understood the logic of guarddog right, permitting *all* protocols between "local" and "h-network" zones should do no or only little harm, if at the same time there are _no_ permitted protocols between "internet" and "h-network" zones and only the crucially needed between "internet" and "local" zones. The "h-network" has no public IP addresses and, thus, is not browseable from outside, right? Only if someone from outside could intrude the PC/laptop, he/she should be able to attack the nfs-server/client. Kind regards, Kimmo ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf