Re: Teredo only used as last resort after IPv4 (Was: ipv6-ops Digest, Vol 25, Issue 9)
Andrius Kazimieras Kasparavic(ius <[email protected]> Thu, 12 Apr 2007 14:54:16 +0100
| Newsgroups | gmane.org.operators.ipv6,gmane.network.ipv6.general |
|---|---|
| Organization | M |
| Message-ID | <[email protected]> |
Well, you both confirmed pings, but what actually I was asking is - as you have default and use IPv4 NAT and teredo-only IPv6, are you able to connect to IPv6 server just by typing www.ipv6.sixxs.net. Andrius Jeroen Massar wrote: > [reminds himself that this is an operational list, reply-to set to > [email protected] which is more appropriate for end user questions's] > > nenad pudar wrote: > >> I have vista now (torredo enabled by default) ,have patched lynksys >> software with Earthlink patch ,it is working fine except that I cannot >> browse since DNS is not working (reverse DNS seems to be OK) >> >> >> C:\Users\Shone>tracert 2001:5a0:d00::5 >> >> Tracing route to gin-nto-core2.ipv6.teleglobe.net >> <http://gin-nto-core2.ipv6.teleglobe.net> [2001:5a0:d00::5] >> over a maximum of 30 hops: >> >> 1 2282 ms 38 ms 41 ms iad0-stf.hotnic.net >> <http://iad0-stf.hotnic.net> [2001:4810:0:100::3] >> > > stf aka "Six To Four" aka 6to4, aka 2002::/16 > > Clearly you are not using an Earthlink tunnel, which would go over their > network, and most likely not Teredo either, though it might be that > hotnic also runs a Teredo relay on their box, don't know if they do > that, it just might. Most likely you are using 6to4 though. > > When Vista notices it can use 6to4 it uses that. > > You might want to check with "netsh int ipv6 show address" what options > you have available. Or check http://www.sixxs.net/tools/ipv6calc/ which > will display the details for you. (www.ipv6.sixxs.net also works of course) > > >> C:\Users\Shone>tracert www.ipv6.sixxs.net <http://www.ipv6.sixxs.net> >> Unable to resolve target system name www.ipv6.sixxs.net >> <http://www.ipv6.sixxs.net>. >> >> >> Am I missing something here ? >> > > Yes cut and pasting correctly ;) You might want to try only > "www.ipv6.sixxs.net" without the quotes. See below for an example. > > >> Is Vista using IPV6 for DNS transport trying to communicate with DNS >> server ? >> > > Yes, but it has the option to fall back to IPv4 transport. Pure native > IPv6 DNS is mostly impossible anyway as one need to be able to reach the > IPv4-only rootservers. Of course having a IPv6 DNS caching resolver that > can speak both IPv4/IPv6 alleviates that problem. > > Greets, > Jeroen > > -- > Using my sweet AYIYA tunnel: > > C:\Documents and Settings\jeroen>tracert www.sixxs.net > > Tracing route to noc.sixxs.net [2001:838:1:1:210:dcff:fe20:7c7c] > over a maximum of 30 hops: > > 1 27 ms 29 ms 29 ms gw-159.dub-01.ie.sixxs.net > [2001:770:100:9e::1] > > 2 28 ms 29 ms 26 ms blanch-sr1-vlan8.services.hea.net > [2001:770:18:8 > ::1] > 3 28 ms 29 ms 29 ms po1-ar1-cwt.hea.net [2001:770:8:31::1] > 4 28 ms 30 ms 28 ms gige4-3-cr1-cwt.hea.net [2001:770:400:f::1] > 5 30 ms 29 ms 29 ms gige3-2-cr1-kp.hea.net [2001:770:400:11::2] > 6 30 ms 29 ms 30 ms gx-link.core.hea.net [2001:770:90:7::2] > 7 48 ms 49 ms 49 ms eth10-0-0.xr1.ams1.gblx.net > [2001:7f8:1::a500:35 > 49:1] > 8 49 ms 47 ms 50 ms ams-ix.ipv6.concepts.nl > [2001:7f8:1::a501:2871:1 > ] > 9 52 ms 117 ms 50 ms 2001:838:0:10::2 > 10 49 ms 54 ms 51 ms noc.sixxs.net > [2001:838:1:1:210:dcff:fe20:7c7c] > > > Trace complete. > >