Re: [IPv6 Users] ipv4 only communication over ipv6 only networks

Hi Daniel,

If it was just two ipv4 networks over an ipv6 backbone, you could use
SSH tunneling.
(http://freshmeat.net/projects/pty-redir/)
If there are more then two ipv4 networks you could setup a
"concentrator" as a tunnel endpoint for all your tunnels and route ipv4
traffic over the ipv6 backbone.

This is not the most elegant solution, but i will work!
I use it as a vpn myself.

Kind regards,
@

On Mon, 2008-05-12 at 21:20 +0200, Daniel Paufler wrote:
> Hi all
> 
> I need some advice / hints on what to use to achive the following
> requirements.
> 
> My goal is to interconnect ipv4 networks via ipv6 only routing
> infrasturcture. Imagine an ipv6 only mesh which connects ipv4 networks
> behind the mesh-nodes.
> 
> I found 6to4 tunnel - even automatic ones, but dont know what technology
> will pass ipv4 traffic over ipv6 network. I want the internet to be able
> to communicate with an ipv4 network over the ipv6 mesh and dont know
> what software / concept to look at.
> 
> Any hints will be appreciated.
> 
> Regards
> 
> Daniel
> 
> _______________________________________________
> Users mailing list
> [email protected]
> https://lists.ipv6.org/mailman/listinfo/users
> 

_______________________________________________
Users mailing list
[email protected]
https://lists.ipv6.org/mailman/listinfo/users