RE: Can't ping a Windows computer on Linux

"Lawrence Hughes" <[email protected]>
Newsgroups gmane.network.ipv6.general
Organization InfoWeapons Corporation
Message-ID <[email protected]>
This is a subtle one – you are trying to use Windows XP as a pure IPv6

node. I know that DNS resolution on Windows XP works only over IPv4,

and there may be other things that still require IPv4. It works OK in a

dual stack network (IPv4 and IPv6), but it won’t fully function in a pure

IPv6 network. Vista will. FreeBSD will. Not sure about Linux, but it

should, esp. if you have installed the full USAGI IPv6 stack.

 

Also, using Site local addresses should work, but if possible, use

Unicast (e.g. 2001:.. or 2002:… ) addresses. Either assign them

manually (e.g. using “net sh” in Windows) or provide a Router

Advertisement (RA) server somewhere on each segment and let

the stateless autoconfig create them for you automatically.

If you insist on using link or site local addresses, don’t

forget to include the interface id everywhere you use the address

appended to the end of the address (e.g. <addr>%4). I’m not

that familiar with site local addresses, but the %1 after yours

in your ipconfig looks odd for some reason. How did you create

the site local addresses?

 

  _____  

From: [email protected] [mailto:[email protected]] On Behalf Of Jason
Gauthier
Sent: Saturday, November 05, 2005 4:49 AM
To: [email protected]
Cc: [email protected]
Subject: Re: Can't ping a Windows computer on Linux

 

The 2 adresses are FEC0:0:0:10::1 and FEC0:0:0:10::2

 

ifconfig on Debian

 

eth0      Lien encap:Ethernet  HWaddr 00:01:03:E3:94:5D  
          adr inet6: fec0:0:0:10::1/64 Scope:Site 
          adr inet6: fe80::201:3ff:fee3:945d/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:11 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5 errors:0 dropped:0 overruns:0 carrier:0 
          collisions:0 lg file transmission:1000 
          RX bytes:2430 (2.3 KiB)  TX bytes:446 (446.0 b)
          Interruption:9 Adresse de base:0xb400 

lo        Lien encap:Boucle locale  
          inet adr: 127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:102 errors:0 dropped:0 overruns:0 frame:0 
          TX packets:102 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          RX bytes:6540 (6.3 KiB)  TX bytes:6540 (6.3 KiB)

 

ipconfig on W2k3

 

Configuration IP de Windows

 

        Nom de l'hôte . . . . . . . . . . : win2k3srv

        Suffixe DNS principal . . . . . . : 

        Type de nœud . . . . . . . . . .  : Diffusion

        Routage IP activé . . . . . . . . : Non

        Proxy WINS activé . . . . . . . . : Non

 

Carte Ethernet ReseauIPv6 :

 

        Suffixe DNS propre à la connexion  : 

        Description . . . . . . . . . . .  : Carte réseau 3Com EtherLink XL
10/100 PCI pour gestion intégrale de PC (3C905C-TX)

        Adresse physique . . . . . . . . . : 00-01-03-E3-94-3A

        DHCP activé. . . . . . . . . . .   : Oui

        Configuration automatique activée  : Oui

        Adresse IP. . . . . . . . . . . .  : 0.0.0.0

        Masque de sous-réseau . . . . . .  : 0.0.0.0

        Adresse IP. . . . . . . . . . . .  : fec0:0:0:10::2%1

        Adresse IP. . . . . . . . . . . .  : fe80::201:3ff:fee3:943a%4

        Passerelle par défaut . . . . . .  : 

        Serveur DHCP. . . . . . . . . . .  : 255.255.255.255

        Serveurs DNS . . . . . . . . . .   : fec0:0:0:ffff::1%1

                                     fec0:0:0:ffff::2%1

                                     fec0:0:0:ffff::3%1

 

Yeah it's in french but you should be able to understand.


 

On 11/4/05, JORDI PALET MARTINEZ <[email protected]
<mailto:[email protected]> > wrote: 

Hi Jason,

I'm not sure what scope/interface is the %1, so probably you're using a
wrong one. If you can post the ipconfig /all it will be much easier, good if
you can show us the ifconfig for the Linux box. 

Also, make sure that you have disabled the Windows Firewall or at least
allowed ICMPv6.

Regards,
Jordi





  _____  

De: Jason Gauthier <[email protected]>
Responder a: < [email protected] <mailto:[email protected]> >
Fecha: Fri, 4 Nov 2005 13:23:01 -0500
Para: "[email protected] " < [email protected]>
CC: < [email protected] <mailto:[email protected]> >
Asunto: Can't ping a Windows computer on Linux

My Windows 2003 computer has an adress that ends with a "%1" and my Linux
computer has what I would call a normal IPv6 adress. 
So when I try to ping either of the two together, well I can't reach them.


----------------------------------------------------------------------------
-----------
Europe Drives IPv6 Deployment 
www.ipv6-es.com <http://www.ipv6-es.com/> 
Madrid 2002 Global IPv6 Summit

************************************
The IPv6 Portal: http://www.ipv6tf.org <http://www.ipv6tf.org/> 

Barcelona 2005 Global IPv6 Summit
Information available at:
http://www.ipv6-es.com <http://www.ipv6-es.com/> 

This electronic message contains information which may be privileged or
confidential. The information is intended to be for the use of the
individual(s) named above. If you are not the intended recipient be aware
that any disclosure, copying, distribution or use of the contents of this
information, including attached files, is prohibited.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.