Re: Issue with MRTG and explicit OIDs
Steve Shipway <[email protected]>
| Newsgroups | gmane.network.mrtg.user |
|---|---|
| Message-ID | <7294716191A1E142B80615ED2C633BCA0137A049@uxcn10-2.UoA.auckland.ac.nz> |
Are you using 'option[]: gauge' (you probably should be)? Can you use SNMPv2 (with these large numbers best to do this)? Steve Steve Shipway University of Auckland ITS UNIX Systems Design Lead [email protected]<mailto:[email protected]> Ph: +64 9 373 7599 ext 86487 ________________________________ From: [email protected] [[email protected]] on behalf of Peter Dolkens [[email protected]] Sent: Sunday, 22 July 2012 6:19 p.m. To: [email protected] Subject: [mrtg] Issue with MRTG and explicit OIDs Hi all, I'm trying to set up some disk monitoring on my Synology NAS, using MRTG (windows). The Target I'm using is: Target[piper.ddrit.com_DISK]: 1.3.6.1.2.1.25.2.3.1.6.33&1.3.6.1.2.1.25.2.3.1.5.33:[email protected]<mailto:1.3.6.1.2.1.25.2.3.1.6.33%261.3.6.1.2.1.25.2.3.1.5.33%[email protected]> If I query either of these values via the command line, I get a correct result. If I query either of these values individually in MRTG, I get a correct result. If I use the line above, then the 2nd value has 2147483648 subtracted from the collected values. Does anyone know why it's doing this, or how to fix it? It's annoying because I'm intending to expand my NAS, and using this counter, I could theoretically display relative capacity usage (displayrelpercent) but right now MRTG can't seem to collect the 2nd counter properly, which is putting a damper on things. Thanks, Pete _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg