Re: MIB for Dell PowerConnect 3524?
Steve Shipway <[email protected]>
| Newsgroups | gmane.network.mrtg.user |
|---|---|
| Message-ID | <5820DC553954E44FA1A36C78323AD1482229A336@uxcn10-6.UoA.auckland.ac.nz> |
You might like to go to http://www.steveshipway.org/cfgmaker and look in there. There are a few host templates for various UPSs and for a generic device. Try using cfgmaker with one or all of these host templates and see if any work - if you device supports the standard UPS MIB objects then there is a good chance one of the host templates will give you what you want. Steve Steve Shipway University of Auckland ITS UNIX Systems Design Lead [email protected] Ph: +64 9 373 7599 ext 86487 ________________________________________ From: [email protected] [[email protected]] on behalf of Steve Lindemann [[email protected]] Sent: Saturday, 22 February 2014 10:19 a.m. To: [email protected] Subject: [mrtg] MIB for Dell PowerConnect 3524? Does anyone know where I can get the MIB for a Dell PowerConnect 3524 to use with MRTG? I've been looking and haven't had any luck finding what I need. In lieu of that, I'll take suggestions for monitoring thru put on the ports on that model switch. Thanks all! -- Steve Lindemann, MSIS __ Network Administrator //\\ ASCII Ribbon Campaign Marmot Library Network \\// against HTML/RTF email, +1.970.242.3331 x116 //\\ vCards & M$ attachments http://www.marmot.org _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg