MRTG and Sonicwall help

I have a sonicwall TZ215, with latest firmware, I am trying to get MRTG to talk to it.

when I run the cfg maker, it talks to the sonicwall and builds a config file with all the sonicwall interfaces… most are commented out.

but I get no graphs

i checked the mrtg.log and have following errors

2014-08-20 21:02:13 -- 2014-08-20 21:02:13: ERROR: Target[192.168.30.1_x1][_IN_] ' $target->[0]{$mode} ' did not eval into defined data
2014-08-20 21:02:13 -- 2014-08-20 21:02:13: ERROR: Target[192.168.30.1_x1][_OUT_] ' $target->[0]{$mode} ' did not eval into defined data

here is the mrtg.cfg for the interface

Target[192.168.30.1_X1]: #X1:[email protected]:
SetEnv[192.168.30.1_X1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="X1-(WAN)"
MaxBytes[192.168.30.1_X1]: 125000000
Title[192.168.30.1_X1]: Traffic Analysis for X1 -- WAN
PageTop[192.168.30.1_X1]: <h1>Traffic Analysis for X1 -- WAN</h1>

I tried adding OID’s that I got from a SNMPwalk against the sonciwall,

Target[192.168.30.1_X1]: 3.6.1.2.1.1.2.0&3.6.1.2.1.2.2.1.2.4:[email protected]:

that gives error

2014-08-20 21:45:30 -- cannot encode Object ID 3.6.1.2.1.1.2.0: first subid too big in Object ID 3.6.1.2.1.1.2.0 at /usr/bin/mrtg line 2339.
2014-08-20 21:45:30 -- 2014-08-20 21:45:30: ERROR: Target[192.168.30.1_x1][_IN_] ' $target->[0]{$mode} ' did not eval into defined data
2014-08-20 21:45:30 -- 2014-08-20 21:45:30: ERROR: Target[192.168.30.1_x1][_OUT_] ' $target->[0]{$mode} ' did not eval into defined data

so the OID’s look like no help … so still no luck on MRTGing my sonicwall

here is the SNMPWALK against the sonciwall

iso.3.6.1.2.1.1.1.0 = STRING: "SonicWALL TZ 215 (SonicOS Enhanced 5.8.1.2-6o)"
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.8741.1
iso.3.6.1.2.1.1.3.0 = Timeticks: (698184303) 80 days, 19:24:03.03
iso.3.6.1.2.1.1.4.0 = STRING: “WAN ROUTER
iso.3.6.1.2.1.1.5.0 = STRING: “RTR-COLO-PIPE_3”
iso.3.6.1.2.1.1.6.0 = STRING: “COLO_5
iso.3.6.1.2.1.1.7.0 = INTEGER: 79
iso.3.6.1.2.1.2.1.0 = INTEGER: 10
iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2
iso.3.6.1.2.1.2.2.1.1.4 = INTEGER: 4
iso.3.6.1.2.1.2.2.1.1.6 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.1.8 = INTEGER: 8
iso.3.6.1.2.1.2.2.1.1.10 = INTEGER: 10
iso.3.6.1.2.1.2.2.1.2.2 = STRING: "LOOPBACK"
iso.3.6.1.2.1.2.2.1.2.4 = STRING: "X1 (WAN)"
iso.3.6.1.2.1.2.2.1.2.6 = STRING: "X3 (Portshielded To X0)"
iso.3.6.1.2.1.2.2.1.2.8 = STRING: "X5 (Unassigned)"
iso.3.6.1.2.1.2.2.1.2.10 = STRING: "U0 (Unassigned)"
iso.3.6.1.2.1.2.2.1.3.2 = INTEGER: 24
iso.3.6.1.2.1.2.2.1.3.4 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.6 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.8 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.10 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.4.2 = INTEGER: 1536
iso.3.6.1.2.1.2.2.1.4.4 = INTEGER: 1500
iso.3.6.1.2.1.2.2.1.4.6 = INTEGER: 0
iso.3.6.1.2.1.2.2.1.4.8 = INTEGER: 0
iso.3.6.1.2.1.2.2.1.4.10 = INTEGER: 0
iso.3.6.1.2.1.2.2.1.5.2 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.5.4 = Gauge32: 1000000000
iso.3.6.1.2.1.2.2.1.5.6 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.5.8 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.5.10 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.6.2 = ""
iso.3.6.1.2.1.2.2.1.6.4 = Hex-STRING: C0 EA E4 57 74 95 
iso.3.6.1.2.1.2.2.1.6.6 = Hex-STRING: C0 EA E4 57 74 97 
iso.3.6.1.2.1.2.2.1.6.8 = Hex-STRING: C0 EA E4 57 74 99 

i’ve been messing with this for days,  and need some help

what am I missing ?

scot