Re: Permission denied at /usr/bin/../lib64/mrtg2/MRTG_lib.pm line 1580

"Courtney, Wrolf" <[email protected]>
Newsgroups gmane.network.mrtg.user
Message-ID <C22DA43300E0E24F8BCA9A53CE460F2E23C951E3@NYCTLPDCEXMB61.transit.nyct.com>
Solved it myself. Think it was an SELINUX problem. When I created the .cfg file under my id, having su'ed to root, I got the problem. When I deleted and recreated the .cfg file having logged in as root directly, the problem went away.

Wrolf

From: mrtg [mailto:[email protected]] On Behalf Of Courtney, Wrolf
Sent: Wednesday, September 24, 2014 9:34 AM
To: [email protected]
Subject: [mrtg] Permission denied at /usr/bin/../lib64/mrtg2/MRTG_lib.pm line 1580

I get the following error on one of my MRTG config files when I run it from a cron job. I do not get the error when I run it from the command line. I have plenty of other config files run from the same cron job that run just fine.

ERROR: writing /etc/mrtg/00255520WLC1.ok.ok: Permission denied at /usr/bin/../lib64/mrtg2/MRTG_lib.pm line 1580.

Anyone seen this before?

Wrolf Courtney

Contents of /etc/cron.d/mrtg

LANG=C
0-59/5 * * * * root bash -c "ls /etc/mrtg/*.cfg | xargs -l /usr/bin/mrtg"

Contents of /etc/mrtg/00255520WLC1.cfg (showing first interface only)

# Created by
# /usr/bin/cfgmaker --ifref=name --ifdesc=descr --output=/etc/mrtg/00255520WLC1.
cfg --global "WorkDir: /var/www/mrtg/00255520WLC1" --global "Options[_]: growrig
ht,bits" --snmp-options=:::::2 [email protected]<mailto:[email protected]>


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits

EnableIPv6: no
WorkDir: /var/www/mrtg/00255520WLC1
Options[_]: growright,bits

######################################################################
# System: 00255520WLC1-1
# Description: Ethernet Routing Switch 5520-48T-PWR  HW:35       FW:6.0.0.6   SW
:v6.0.3.008 BN:08 (c) Nortel Networks
# Contact: NCSO - 646 252-5700
# Location: 331 Bay Street SIRR
######################################################################


### Interface 1 >> Descr: 'Nortel-Ethernet-Routing-Switch-5520-48T-PWR-Module---
Port-1' | Name: 'ifc1 (Slot: 1 Port: 1)' | Ip: '' | Eth: '' ###

Target[10.3.3.1_ifc1_(Slot_1_Port_1)]: #ifc1\ (Slot\:\ 1\ Port\:\ 1):public@
10.3.3.1:::::2
SetEnv[10.3.3.1_ifc1_(Slot_1_Port_1)]: MRTG_INT_IP="" MRTG_INT_DESCR="Nortel-
Ethernet-Routing-Switch-5520-48T-PWR-Module---Port-1"
MaxBytes[10.3.3.1_ifc1_(Slot_1_Port_1)]: 1250000
Title[10.3.3.1_ifc1_(Slot_1_Port_1)]: Nortel Ethernet Routing Switch 5520-48T
-PWR Module - Port 1 -- 00255520WLC1-1
PageTop[10.3.3.1_ifc1_(Slot_1_Port_1)]: <h1>Nortel Ethernet Routing Switch 55
20-48T-PWR Module - Port 1 -- 00255520WLC1-1</h1>
                <div id="sysdetails">
                        <table>
                                <tr>
                                        <td>System:</td>
                                        <td>00255520WLC1-1 in 331 Bay Street SIR
R</td>
                                </tr>
                                <tr>
                                        <td>Maintainer:</td>
                                        <td>NCSO - 646 252-5700</td>
                                </tr>
                                <tr>
                                        <td>Description:</td>
                                        <td>Nortel-Ethernet-Routing-Switch-5520-
48T-PWR-Module---Port-1  </td>
                                </tr>
                                <tr>
                                        <td>ifType:</td>
                                        <td>ethernetCsmacd (6)</td>
                                </tr>
                                <tr>
                                        <td>ifName:</td>
                                        <td>ifc1 (Slot: 1 Port: 1)</td>
                                </tr>
                                <tr>
                                        <td>Max Speed:</td>
                                        <td>10.0 Mbits/s</td>
                                </tr>
                        </table>
                </div>

_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.