Re: [FORGED] Won't work after reboot

2015-06-05 09:37:12: WARNING: Can not determine ifNumber for 
[email protected]:        ref: 'Name'     key: 'wlan0'

2015-06-05 09:37:12: WARNING: Can not determine ifNumber for 
[email protected]:        ref: 'Name'     key: 'wlan1'



This means that the interfaces do not yet exist; possibly you are querying 
them before they are initialised?  Also, make sure to delete any .ok file that 
might be caching out of date information before you run.



Steve



Steve Shipway

 <mailto:[email protected]> [email protected]

(GNU Terry Pratchett)



From: Aizad Fauzi [mailto:[email protected]]
Sent: Friday, 5 June 2015 1:39 p.m.
To: Steve Shipway
Cc: [email protected]
Subject: Re: [FORGED] [mrtg] Won't work after reboot



Hi,



A few informations ;

Using OpenWrt on device and MRTG/SNMPD installed on the router itself.

Error thrown after reboot as following ;



using -ifref=name to capture the device name instead of Interface Number.



2015-06-05 09:37:12: WARNING: Can not determine ifNumber for 
[email protected]:        ref: 'Name'     key: 'wlan0'

2015-06-05 09:37:12: WARNING: Can not determine ifNumber for 
[email protected]:        ref: 'Name'     key: 'wlan1'

2015-06-05 09:37:12: ERROR: Target[192.168.1.1_wlan0][_IN_] ' 
$target->[3]{$mode} ' did not eval into defined data

2015-06-05 09:37:12: ERROR: Target[192.168.1.1_wlan0][_OUT_] ' 
$target->[3]{$mode} ' did not eval into defined data

2015-06-05 09:37:12: ERROR: Target[192.168.1.1_wlan1][_IN_] ' 
$target->[5]{$mode} ' did not eval into defined data

2015-06-05 09:37:12: ERROR: Target[192.168.1.1_wlan1][_OUT_] ' 
$target->[5]{$mode} ' did not eval into defined data

_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg