Re: snmpget failing after switching from polling 32 bit to 64 bit interface counters

I can't help but notice that the below says you're using SNMP v1, which
doesn't support 64-bit counters. The question is why is MRTG trying to
use SNMPv1 with that config, which isn't immediately clear to me, since
you have :::::2 in the right place (I did exactly what you did a few
years back and have had no issues with it). I would use cfgmaker to poll
those hosts and compare the configs they make with what you made
manually to find the difference.
cfgmaker [email protected]:::::2 for instance...
    -Josiah


    -Josiah

On 3/3/16, 1:54 AM, Darren Murphy wrote:
> Received SNMP response with error code
>   error status: noSuchName
>   index 2 (OID: 1.3.6.1.2.1.31.1.1.1.6.2)
> SNMPv1_Session (remote host: "a.b.c.d" [a.b.c.d].161)
>                   community: "my_community_string"
>                  request ID: 1687324163
>                 PDU bufsize: 8000 bytes
>                     timeout: 10s
>                     retries: 1
>                     backoff: 1)

-- 
-----
Wm. Josiah Erikson
Head, Systems and Networking
Hampshire College
Amherst, MA 01002