Re: Error - Unable to open a GM Port.

Sid Carter <[email protected]> Mon, 15 Sep 2003 19:36:52 +0530
Newsgroups gmane.network.myrinet.general
Organization Sid Carter GmBH.
Message-ID <[email protected]>
On Mon, 2003-09-15 at 19:30, Craig Tierney wrote:
> > glibc-2.2.4-32.3
> > gm-1.6.4-1
> > mpif90 for 1.2.5 (release) of : 2003/01/13 16:21:53
> > 
> > "Error: Unable to open a GM port !"
> Run gm_board_info and see if you have other processes
> still running on the node.  There is a finite number
> of available ports.  There might be some runaway processes
> using them.

Craig,

We have already done that and we do have free ports available. Enclosing
more info, FYI.

==============================
[gopal@hydra3 jason]$ more qgrid2.o822 /* this is the output of the 
application I ran */
Generating public/private rsa1 key pair.
Your identification has been saved in /tmp/keys.vUfXwg/tmpid.
Your public key has been saved in /tmp/keys.vUfXwg/tmpid.pub.
The key fingerprint is:
e4:f6:05:d4:43:8a:64:23:5e:9d:84:ba:7f:fa:a9:67 gopal@compute-0-8
spawn /usr/bin/ssh-add /tmp/keys.vUfXwg/tmpid
Enter passphrase for gopal@compute-0-8:
Identity added: /tmp/keys.vUfXwg/tmpid (gopal@compute-0-8)

[2] Error: Unable to open a GM port !
[0] Error: Unable to open a GM port !
[6] Error: Unable to open a GM port !
[3] Error: Unable to open a GM port !
[5] Error: Unable to open a GM port !
[1] Error: Unable to open a GM port !
[7] Error: Unable to open a GM port !
[4] Error: Unable to open a GM port !
[gopal@hydra3 jason]$ ssh compute-0-8
Last login: Thu Sep 11 10:58:40 2003 from hydra3
Rocks Compute Node
Rocks 2.3.2 (Annapurna)
Kickstarted on Thu Jul 31 13:15:23 SGT 2003
Profile built 13:07:01 31 Jul 2003
[gopal@compute-0-8 gopal]$ /usr/sbin/gm_board_info
GM build ID is "1.6.4_Linux_and_AIX 
@compute-0-8:/usr/src/redhat/BUILD/gm-1.6.4_Linux_and_AIX Thu Jul 31 
13:19:40 SGT 2003."

Board number 0:
   lanai_clockval    = 0x082082a0
   lanai_cpu_version = 0x0900 (LANai9.0)
   lanai_board_id    = 00:60:dd:7e:f6:fc
   lanai_sram_size   = 0x00200000 (2048K bytes)
   max_lanai_speed   = 134 MHz
   product_code      = 111
   serial_number     = 122077
     (should be labeled: "M3F-PCI64B-2-122077")
LANai time is 0x696f222413a ticks, or about 53982 minutes since reset.
This is node 15 (compute-0-8)  node_type=0
Board has room for 8 ports,  3000 nodes/routes,  16384 cache entries
           Port token cnt: send=61, recv=248
Port: Status  PID
    0:   BUSY  8664  (this process [gm_board_info])    /* port is being 
used only by gm_board_info */
Route table for this node follows:
The mapper 48-bit ID was: 00:60:dd:7e:f7:08
gmID MAC Address                                 gmName Route
---- ----------------- -------------------------------- 
---------------------
   11 00:60:dd:7e:f7:02                      compute-0-3 b6
   12 00:60:dd:7e:f7:06                      compute-0-6 b9
   14 00:60:dd:7e:f7:0e                      compute-0-7 bd
   15 00:60:dd:7e:f6:fc                      compute-0-8 80 (this node)
   17 00:60:dd:7e:f7:01                     compute-0-10 be
   19 00:60:dd:7e:f6:fe                     compute-0-13 bb
   20 00:60:dd:7e:f7:08                     compute-0-14 bc (mapper)
   21 00:60:dd:7e:f9:84                           hydra3 b3
   99 00:60:dd:7e:f9:6b                      compute-0-2 b5
  102 00:60:dd:7e:f6:f9                      compute-0-1 b4
  103 00:60:dd:7e:f7:10                      compute-0-5 b8
  105 00:60:dd:7e:f8:36                      compute-0-4 b7
  106 00:60:dd:7e:f8:4e                      compute-0-9 bf
  107 00:60:dd:7e:f9:7c                     compute-0-11 ba
  108 00:60:dd:7e:f9:83                     compute-0-12 b2
===============================

Any help regarding the same would be appreciated.

Thanks
Regards
           Sid