Tru64, Linux Myrinet 2000

Hi Users,

we have bought a new SMP-I64-Server running RedHat EL 4 and a myrinet
M3S-PCI64B-4 card.
We have also some Alpha-WS with the same kind of Myrinet-Cards connected on
a M2000-switch.
The Alpha-WS running Tru64-UNIX and the gm-1.5.x (last rerleased version of
gm for Tru64).

First I have tried to build the gm 2.0.x on the RH system. Software and
driver was build
right (I think). When i run the gm_board_info i got the following output:

GM build ID is "2.0.19_Linux_rc20050224170029PST
[email protected]:/myrinet/gm Thu Apr  7 14:53:14 CEST 2005."


Board number 0:
  lanai_clockval    = 0x082082a0
  lanai_cpu_version = 0x0900 (LANai9.0)
  lanai_board_id    = 00:60:dd:7f:64:cc
  lanai_sram_size   = 0x00400000 (4096K bytes)
  max_lanai_speed   = 134 MHz
  product_code      = 110
  serial_number     = 88179
    (should be labeled: "M3S-PCI64B-4-88179")
LANai time is 0x01823aa1c ticks, or about 3 minutes since reset.
Mapper is 00:60:dd:7f:64:cc.
Map version is 2736939.
1 hosts.
Network is fully configured.
This node is "v23cluster5.fem.bam.de"
Board has room for 16 ports,  6644 nodes/routes,  65536 cache entries
          Port token cnt: send=61, recv=253
Port: Status  PID
   0:   BUSY 29147  (this process [gm_board_info])
   1:   BUSY 29091
Route table for this node follows:
gmID MAC Address                                 gmName Route
---- ----------------- -------------------------------- --------------------
-
   1 00:60:dd:7f:64:cc           v23cluster5.fem.bam.de (this node) (mapper)

But no information of the other cards at the switch. I havn't also no myri0
device
(ifconfig) for the Myrinet-Card.

Then I have read the Information that I must have the same software-level of
the gm-
Software. So I downloaded the gm-1.6.5 for Linux (2.4 Kernel), but we are
running
Kernel 2.6.xxx. I got an error at the ./configure execution:

checking GM version... "1.6.5_Linux"
checking driver to use... Error: no include/linux/autoconf.h in the
/usr/src/linux tree


My question is:

What can I do to work my Alpha-WS and the new IA64-Server together?


Thanks in advance,

Cetin Haftaoglu